Manual de instrucciones de Smeg KSE90XT

Resumen del contenido incluido en la página 1

Instructions Manual
Manual de instrucciones
Manual de Instruções
KSE90XT

Resumen del contenido incluido en la página 2

EN INDEX RECOMMENDATIONS AND SUGGESTIONS ..................................................................................................................... 3 CHARACTERISTICS ............................................................................................................................................................. 4 INSTALLATION.....................................................................................................................................................

Resumen del contenido incluido en la página 3

RECOMMENDATIONS AND SUGGESTIONS The Instructions for Use apply to several versions of this appliance. Accord- ingly, you may find descriptions of individual features that do not apply to your specific appliance. INSTALLATION � The manufacturer will not be held liable for any damages resulting from in- correct or improper installation. � The minimum safety distance between the cooker top and the extractor hood is 650 mm (some models can be installed at a lower height, please re- fer to the p

Resumen del contenido incluido en la página 4

CHARACTERISTICS Dimensions          Components  Ref. Q.ty Product Components 1 1 Hood Body, complete with: Controls, Light, Blower,  Filters   2 1 Telescopic Chimney comprising: 2.1 1 Upper Section  2.2 1 Lower Section 8a 1 Right Air Outlet Grill 8b 1 Left Air Outlet Grill   9 1 Reducer Flange ø 150-120 mm  14.1 2 Air Outlet Connection Extension  15 1 Air Outlet Connection  Ref. Q.ty Installation Components 7.2.1 2 Upper Chi

Resumen del contenido incluido en la página 5

INSTALLATION Wall drilling and bracket fixing      Wall marking: • Draw a vertical line on the supporting wall up to the ceiling, or as high as practical, at the centre of the area in which the hood will be installed. • Draw a horizontal line at 650 mm above the hob. Place bracket 7.2.1 on the wall as shown about 1-2 mm from the ceiling or upper limit aligning the centre (notch) with the vertical reference line. • Mark the wall at the centres of the holes in the bracket.

Resumen del contenido incluido en la página 6

Mounting the hood body • Before attaching the hood body, tighten the two screws Vr lo-  cated on the hood body mounting points. • Hook the hood body onto the screws 12a. • Fully tighten the support screws 12a. • Adjust the screws Vr to level the hood body.  Connections DUCTED VERSION AIR EXHAUST SYSTEM When installing the ducted version, connect the hood to the chimney using either a flexible or rigid pipe ø 150 or 120 mm,     the choice of which is left to the installer.  •

Resumen del contenido incluido en la página 7

ELECTRICAL CONNECTION • Connect the hood to the mains through a two-pole switch hav- ing a contact gap of at least 3 mm. • Remove the grease filters (see paragraph Maintenance) being sure that the connector of the feeding cable is correctly inserted in the socket placed on the side of the fan.  Chimney assembly Upper chimney section  • Slightly widen the two sides of the upper chimney and hook  them behind the brackets 7.2.1, making sure that they are prop-  erly housed.

Resumen del contenido incluido en la página 8

USE      L . S LED LED . V1 . . V2 – , . V3 – , . 8 EN 8

Resumen del contenido incluido en la página 9

MAINTENANCE Grease filters CLEANING METAL SELF- SUPPORTING GREASE FILTERS • The filters must be cleaned every 2 months of operation, or more frequently for particularly heavy usage, and can be washed in a dishwasher. • Remove the filters one at a time by pushing them towards the back of the group and pulling down at the same time. • Wash the filters, taking care not to bend them. Allow them to dry before refitting. • When refitting the filters, make sure that the handle is visible on