Resumen del contenido incluido en la página 1
PN-S655
LCD MONITOR
OPERATION GUIDE
Resumen del contenido incluido en la página 2
Contents Basic Operation ...............................................................3 Menu Items .......................................................................5 Displaying the menu screen .........................................5 Menu item details .........................................................6 Adjustments for PC screen display ............................10 Initialization (Reset)/Functional Restriction Setting ...11 Controlling the Monitor with a PC (RS-232C) ..........
Resumen del contenido incluido en la página 3
Basic Operation 5. BRIGHT +/- (Backlight adjustment) Pressing or displays the BRIGHT menu when the 1 menu screen is not displayed. BRIGHT 15 2 3 4 Press or to adjust the brightness. * If you do not press any buttons for about 4 seconds, the 5 BRIGHT menu automatically disappears. 6. SIZE (Screen size selection) The menu is displayed. Press or to select the screen size. (See page 4.) 6 7 7. DISPLAY Displays monitor information. Every time you press this button, the display changes
Resumen del contenido incluido en la página 4
Basic Operation nSwitching the screen size Even when the screen size is changed, the display may remain the same depending on the input signal. WIDE PC input Displays image so it fills the entire screen. AV input An image with a 4:3 aspect ratio is stretched to fill the entire screen. ZOOM 1 PC input An image with a 4:3 aspect ratio is enlarged to fill the entire screen without changing the aspect ratio. The edges of the image may be cut off. AV input ZOOM 2 PC input Use this size if ZOOM 1 c
Resumen del contenido incluido en la página 5
Menu Items nMenu screen display Displaying the menu screen 1 3 2 4 Video and audio adjustment and settings of various functions are enabled. This section describes how to use the menu SCREEN PICTURE 1/2 PC3 D-SUB items. See pages 6 to 8 for details of each menu items. PICTURE AUTO AUDIO CONTRAST 30 nExample of operation SETUP BLACK LEVEL 96 (Adjusting CONTRAST in the PICTURE menu) OPTION TINT 30 MENU 1. Press to display the menu screen. ENLARGE COLORS 30 PIP/PbyP SHARPNESS 12 SCREEN
Resumen del contenido incluido en la página 6
Menu Items COLORS Menu item details Adjusts the color intensity. The menu will differ depending on the input mode. SHARPNESS Adjusts the sharpness of the image. nSCREEN ADVANCED (AV input) AUTO (PC3/PC4) You can adjust more specifically. (See page 10.) The CLOCK, PHASE, H-POS, and V-POS are automatically adjusted. COLOR MODE Pressing performs adjustment. Changes the color mode on the screen. The color mode on Use this automatic adjustment when you use the PC3 input the screen can also be ch
Resumen del contenido incluido en la página 7
Menu Items nSETUP nOPTION OSD H-POSITION DATE/TIME SETTING Adjusts the horizontal display position of menu screen. Set the date and time. Press or to select the date OSD V-POSITION and time, and press or to change the numerical values. Adjusts the vertical display position of menu screen. Set the date in “Year/Month/Day” order. LANGUAGE Set the time on a 24-hour basis. Sets the display language for the menu screen. SCHEDULE (See page 9.) HDMI AUTO VIEW You can set the time to switch the
Resumen del contenido incluido en la página 8
Menu Items COLOR SYSTEM AUTO OFF Select the color system of the AV equipment which is Sets the display method when no signals for the sub screen connected to AV4 and AV5 input terminal. (AUTO / PAL / are input in PIP, PbyP, or PbyP2 mode. PAL-60 / SECAM / NTSC3.58 / NTSC4.43) MANUAL ....... Displays a main screen and a black sub screen. When AUTO is selected, the color system is automatically AUTO ............ Displays the main screen as a full screen. set according to the input signal. TIPS
Resumen del contenido incluido en la página 9
ENLARGE V Menu Items nEnlarge nSCHEDULE • You can align several monitors and integrate them into a You can set the time to switch the monitor on and off. single large screen to display. Set this function with “SCHEDULE” in the OPTION menu. (See • Up to five monitors can be aligned in both the longest and page 7.) shortest directions. PC3 D-SUB SCHEDULE • Each monitor displays enlarged views of separated images. XXXX/XX/XX XXX XX:XX:XX (Example) No. (1) POWER (2) DAY OF THE WEEK (3) TIME I
Resumen del contenido incluido en la página 10
Menu Items Caution Adjustments for PC screen display • Do not switch off the main power after setting the nAutomatic adjustment SCHEDULE. • Specify the correct date and time. (See page 7.) When you use the PC3 input terminal or PC4 input terminals SCHEDULE does not function unless the date and time are to display a PC screen for the first time, or when you change specified. the setting of the PC, use the automatic screen adjustment. • Check regularly that the set date and time are correct. 1.
Resumen del contenido incluido en la página 11
Initialization (Reset)/Functional Restriction Setting You can return the settings to their factory-preset values and TEMPERATURE ALERT restrict operations. Selects the notification method for an abnormal temperature. SIZE 1. After pressing for about 5 seconds, press , OFF .............. Do not notify about an abnormal , , and in that order. temperature. OSD & LED .. When an abnormal temperature is FUNCTION 1/1 detected, the power LED flashes in red ALL RESET and green alternately an
Resumen del contenido incluido en la página 12
Controlling the Monitor with a PC (RS-232C) You can control this monitor from a PC via RS-232C (COM Communication conditions port) on the PC. You can also connect multiple monitors via a daisy chain by Set the RS-232C communication settings on the PC to match using a PC. By assigning ID numbers to each monitor (see the monitor’s communication settings as follows: page 13), you can make input mode selection/adjustment or Baud rate 9600 bps Stop bit 1 bit can check the status of a specific mo
Resumen del contenido incluido en la página 13
Controlling the Monitor with a PC (RS-232C) nResponse code format nCommunication interval When a command has been executed correctly • After OK or ERR is returned, you must send the following commands. O K Return code To set a timeout for the command response, specify 10 (0DH, 0AH) seconds or longer. • Provide an interval of 100 ms or more between the A response is returned after a command is executed. command response and the transmission of the next * If an ID number has been assigned co
Resumen del contenido incluido en la página 14
Controlling the Monitor with a PC (RS-232C) IDLK ........The parameter of this command sets the ID nCommands for ID control number of the monitor. The monitor is subject to all The command examples shown on this page assume the subsequent commands. following connection and ID number set up. ID number: 1 ID number: 2 ID number: 3 ID number: 4 Example: Following commands are for the monitor IDLK0002 ← with ID number: 2. Searching for monitor with ID number: WAIT ← 2 IDST .........A monitor
Resumen del contenido incluido en la página 15
Controlling the Monitor with a PC (RS-232C) nRepeater control This system has a function to allow setting of multiple monitors connected in a daisy chain using a single command. This function is called repeater control. You can use Repeater control function without assigning ID numbers. [Example] Set 1 Set 2 Set 3 Set 4 * If monitors are connected as shown above, you can execute a command like “Set all monitors’ input settings to PC1 DVI-D”. nRepeater control command Repeater control is
Resumen del contenido incluido en la página 16
Controlling the Monitor with a PC (RS-232C) RS-232C command table How to read the command table Command: Command field (See page 12.) Direction: W When the “Parameter” is set in the parameter field (see page 12), the command functions as described under “Control/Response Contents”. R The returned value indicated under “Reply” can be obtained by setting “????”, “ ?” or “???+” (repeater control) in the parameter field (see page 12). Parameter: Parameter field (See page 12.) Reply: Response (Ret
Resumen del contenido incluido en la página 17
Controlling the Monitor with a PC (RS-232C) PICTURE menu Function Command Direction Parameter Reply Control/Response contents * AUTO AGIN W 1 When the input mode is PC3, PC4. - CONTRAST CONT WR 0-60 0-60 0-127 on PC3/PC4. BLACK LEVEL BLVL WR 0-60 0-60 0-127 on PC3/PC4. TINT TINT WR 0-60 0-60 B COLORS COLR WR 0-60 0-60 SHARPNESS SHRP WR 0-24 0-24 ADVANCED FLESH TONE FLES WR 0-2 0-2 0: OFF, 1: LOW, 2: HIGH (When the input 3D-NR TDNR WR 0-2 0-2 0: OFF, 1: LOW, 2: HIGH B mode is AV.) MPEG-NR MPNR W
Resumen del contenido incluido en la página 18
Controlling the Monitor with a PC (RS-232C) SETUP menu Function Command Direction Parameter Reply Control/Response contents * OSD H-POSITION OSDH WR 0-100 0-100 B OSD V-POSITION OSDV WR 0-100 0-100 LANGUAGE LANG WR 14 14 ENGLISH 1 1 DEUTSCH 2 2 FRANÇAIS 3 3 ITALIANO B 4 4 ESPAÑOL 5 5 РУССКИЙ 6 6 HDMI AUTO VIEW HDAW WR 0-1 0-1 0: OFF, 1: ON B PICTURE FLIP PFIL WR 0-3 0-3 0: STANDARD, 1: MIRROR, 2: UPSIDE DOWN, 3: ROTATE B Power On Delay PWOD WR 0 0 OFF B 1-60 1-60 ON STANDBY MODE STBM WR 0-1 0-
Resumen del contenido incluido en la página 19
Controlling the Monitor with a PC (RS-232C) ENLARGE menu (When the input mode is PC) Function Command Direction Parameter Reply Control/Response contents * ENLARGE MODE EMAG WR 0-4 0-4 0: OFF, 1: 2 x 2, 2: 3 x 3, 3: 4 x 4, 4: 5 x 5 EMHV WR 11-55 11-55 1 x 1 (OFF) to 5 x 5 (“m x n” is expressed as “mn”, where m and n are the numbers of monitors specified for the longest direction and the shortest direction respectively.) BEZEL WIDTH WIDTH OF THE BEZH WR 0-100 0-100 SHORTER SIDE WIDTH OF THE BEZ
Resumen del contenido incluido en la página 20
Controlling the Monitor with a PC (RS-232C) Others Function Command Direction Parameter Reply Control/Response contents * SCREEN SIZE (PC) WIDE WR 1-5 1-5 1: WIDE, 2: NORMAL, 3: Dot by Dot, 4: ZOOM1, 5: ZOOM2 B SCREEN SIZE (AV) WIDE WR 1-5 1-5 1: WIDE, 2: ZOOM1, 3: ZOOM2, 4: NORMAL, 5: Dot by Dot B VOLUME VOLM WR 0-31 0-31 B MUTE MUTE WR 0-1 0-1 0: OFF, 1: ON - INFORMATION MODEL INF1 R Value A SERIAL NO SRNO R Value BRIGHT VLMP WR 0-31 0-31 Brightness B TEMPERATURE SENSOR DSTA R 0 Internal tempe
