Manual de instrucciones de Sanus Systems Monitor Mount VMTV

Resumen del contenido incluido en la página 1

VMTV
(6901-100175 <01>)
IMPORTaNT SaFETY INSTR uCTIONS - Sa VE THESE INSTRuCTIONS
002555.eps
Thank you for choosing a Sanus Systems VMTV monitor mount. The VMTV monitor mount is designed to support
TWM - complete assembly
monitors 13 to 27 inches (33 to 68 cm); maximum weight capacity is 45 kg (100 lbs.). The VMTV monitor mounts are
adjustable, allowing up to 110˚ of swivel, up to 180˚ of roll, and three tilt settings 0˚, -5˚, and -10˚.
CauTION
Do not use this product for any purpose not e

Resumen del contenido incluido en la página 2

7/32 in. Supplied Parts and Hardware Before starting assembly, verify all parts are included and undamaged. If any parts are missing or damaged, do not return the item to your dealer; contact Customer Service. Never use damaged parts! [03] x 1 [04] x 1 [01] x 1 [02] x 1 [05] x 1 [06] x 1 [07] x 1 [08] x 1 [09] x 4 [10] x 1 [11] x 1 [12] x 1 [13] x 1 [14] x 1 [15] x 1 6901-100175 <01> 002556.eps TVM - parts list

Resumen del contenido incluido en la página 3

1 7/32 in. 63.5 mm (2.5 in.) [01] [09] 002557.eps TWM - Mount to wood stud CauTION Avoid potential injuries or property damage! Do not overtighten the lag bolts [09]. Tighten the bolts only [01] until they are pulled firmly against the wall plate [01]. 6901-100175 <01> 002557.eps TWM - Mount to wood stud 002557.eps TWM - Mount to wood stud 002557.eps TWM - Mount to wood stud

Resumen del contenido incluido en la página 4

2 [10] NOTE Do not overtighten the pivot nut [12]. The arm [03] must be free to move. [03] [12] [02] [08] [06] 002558.eps TWM - Install Arm 6901-100175 <01> 002558.eps TWM - Install Arm 002558.eps TWM - Install Arm

Resumen del contenido incluido en la página 5

3 [11] 0° Tilt -5° Tilt -10° Tilt [11] CauTION Avoid potential injuries or property damage! Do not use the -10° Tilt position for monitors larger 002561.eps than 23 in. (68 cm) or weighing more than 27 kg TWN - Choose tilt setting (60 lbs.). CauTION [15] Avoid potential injuries or property damage! [14] Be sure the square shoulder of the bolt [11] [13] seats completely into the square hole before tightening the bolt. 002561.eps TWN - Choose tilt setting 6901-100175 <01> 002559.eps TWM - in

Resumen del contenido incluido en la página 6

4 002559.eps TWM - install platter [06] 5 [a] NOTE Loosen the eight fasteners shown. Adjust the platter so that the slots [A] are slightly wider than the width of the monitor. Retighten the fasteners. [a] 6901-100175 <01> 002560.eps TWM - Adjust platter size 002560.eps TWM - Adjust platter size

Resumen del contenido incluido en la página 7

6 [04] HEAVY! You will need assistance with this step. Have an assistant hold 1 2 the monitor in place on the platter while you secure the strap [04]. 3 CauTION Avoid potential injuries or property damage! Never leave the monitor on the wall mount unless the strap [04] is securely fastened. 6901-100175 <01>

Resumen del contenido incluido en la página 8

Milestone AV Technologies, Inc. and its affiliated corporations and subsidiaries (collectively, “Milestone”), intend to make this manual accurate and complete. However, Milestone makes no claim that the information contained herein covers all details, conditions, or variations. Nor does it provide for every possible contingency in connection with the installation or use of this product. The information contained in this document is subject to change without notice or obligation of any kind.