Resumen del contenido incluido en la página 14
Advanced Operation—OSD Menu You can use the OSD menu to adjust various settings for your LED LCD Monitor. Press the 1 button to display the OSD Menu, and use ▲ or ▼ to select the desired OSD menu. Short Cuts Function from the button(s) AUTO IMAGE ADJUST: To auto adjust Horizontal Position, Vertical Position, Phase (Fine Tune) and Clock (H. Size) of the screen. CONTRAST: To adjust the foreground white level of screen image. ▲: increase contrast, ▼: decrease contrast. BRIGHTN
Resumen del contenido incluido en la página 15
INPUT SELECT: When Input Select is pressed, change Input signal to D-SUB, HDMI, DISPLAY PORT or AUTO. AUDIO ADJUST: To adjust the audio functions. VOLUME: To adjust the volume of speaker output. MUTE: To turn the Mute ON/OFF. AUDIO INPUT: When in HDMI input, select where the audio source comes from AUDIO IN or HDMI. When in DisplayPort input, select where the audio source comes from AUDIO IN or DP. COLOR ADJUST: To select the color for improving brightness and color saturation b
Resumen del contenido incluido en la página 16
SETUP MENU: To set up LANGUAGE SELECT, OSD POSITION, OSD TIME OUT, OSD BACKGROUND and LED mode. LANGUAGE SELECT: To allow users to choose from available languages. OSD POSITION: Press ▲ or ▼ button to select between horizontal and vertical OSD Position adjustment. H. POSITION: To horizontally adjust the OSD position. ▲: move OSD to the right, ▼: move OSD to the left. V. POSITION: To vertically adjust the OSD position. ▲: move OSD up, ▼: move OSD down. OSD TIME OUT: To automatic
Resumen del contenido incluido en la página 17
Supporting Timing Modes STANDARD RESOLUTION VGA 720 x 400 @ 70Hz VGA 640 x 480 @ 60Hz MAC 640 x 480 @ 67Hz VESA 640 x 480 @ 72Hz VESA 640 x 480 @ 75Hz VESA 800 x 600 @ 56Hz VESA 800 x 600 @ 60Hz VESA 800 x 600 @ 72Hz VESA 800 x 600 @ 75Hz MAC 832 x 624 @ 75Hz VESA 1024 x 768 @ 60Hz VESA 1024 x 768 @ 70Hz VESA 1024 x 768 @ 75Hz VESA 1280 x 960 @ 60Hz VESA 1152 x 864 @ 75Hz MAC 1152 x 870 @ 75Hz VESA 1280 x 1024 @ 60Hz VESA 1280 x 1024 @ 75Hz VESA 1440 x 900 @ 60Hz VESA 1440
Resumen del contenido incluido en la página 18
Technical Information Panel 27” TFT (with LED backlight) Power Management On: 36 Watts (typical), 44 Watts (maximum) Standby Mode: < 0.5 Watt Off: < 0.5 Watt Displayable Resolution Full HD 1920 x 1080 max. Vertical Frequency 60Hz max. Pixel Dimension 0.3114 x 0.3114 mm Display Color 16.7M Tilt -5°~20° Active Display Area 597.888 mm x 336.312 mm Temperature Operating: 0°C ~ +40°C Storage: -20°C ~ + 60°C Compliance FCC-B, CE, UL/cUL Power Input Voltage DC +12V --- 3.5A, SHENZHEN
Resumen del contenido incluido en la página 19
Wall-Mount Installation Instructions Preparing To Install The Optional Wall Mount Arm (not included) This LED LCD Monitor can be attached to a wall mounting arm you can purchase separately. Turn the power OFF then disconnect the cables from the LED LCD Monitor before performing the procedure below. 1. Lay the LED LCD Monitor face down on a soft surface. 2. Remove the hinge cover. 3. Remove the 4 screws holding the stand to the hinge. 4. Remove the stand. Attaching The Optional Wa
Resumen del contenido incluido en la página 1
PXL2770MW
LED LCD Monitor
USER'S GUIDE
www.planar.com
Resumen del contenido incluido en la página 2
Content Operation Instructions...................................................................................................................................................1 Unpacking Instructions .................................................................................................................................................3 Safety Precautions................................................................................................................................
Resumen del contenido incluido en la página 3
Operation Instructions Thank you for purchasing the PXL2770MW LED LCD monitor. Please read this guide thoroughly before installation. FCC RADIO FREQUENCY INTERFERENCE STATEMENT WARNING: (FOR FCC CERTIFIED MODELS) This has been tested and found compliant with the limits for a Class B digital LED LCD Monitor device, pursuant to part 15 of the FCC Rules. These limits are designed to provide proper protection against harmful interference to a residential installation. This LED LCD Mon
Resumen del contenido incluido en la página 4
COMMUNIQUE D’AVERTISSEMENT DE LA FCC CONCERNANT LES INTERFERENCE DE FREQUENCE RADIO: (SEULEMENT POUR MODELES CERTIFIE PAR LA FCC) Ce moniteur a été testé et à été trouvé conforme aux limites pour un appareil numérique de Classe B, suivant la partie 15 des règlements de la FCC. Ces limites ont été développées pour offrir une protection satisfaisante contre les interférences nuisibles dans une installation résidentielle. Ce moniteur génère, utilise et peut radier de l’énergie de fréquence r
Resumen del contenido incluido en la página 5
Unpacking Instructions Remove the LED LCD Monitor out of the package and take off the plastic bag and Polystyrene Foam. Pull the base from Parallel versus Panel to Vertical. Adjust the Panel between -5° leaning forward and 20° leaning backward. Safety Precautions Follow all warnings, precautions and maintenance as recommended in this user’s manual to maximize the life of your unit. Do: Turn off the product before cleaning. Touch screen surface may be cleaned using a soft
Resumen del contenido incluido en la página 6
Consignes de sécurité Respectez tous les avertissements, les précautions et conseils d’entretien recommandés dans ce manuel de l’utilisateur pour maximiser la durée de vie de votre appareil. A faire : Éteindre le produit avant de le nettoyer. La surface de l'écran tactile peut être nettoyée avec un chiffon doux et propre imprégné d’un nettoyant doux du commerce pour vitres ou d'un mélange à 50/50 d'alcool isopropylique et d'eau. Utilisez un chiffon doux imprégné d'un détergeant dou
Resumen del contenido incluido en la página 7
Package Overview LED LCD Monitor Base AC/DC Power Adapter Power Cord (AC 100~240V Input / DC 12V Output) VGA Signal Cable Audio-in Cable Display Port Cable User’s Guide 5
Resumen del contenido incluido en la página 20
Troubleshooting No power Make sure A/C power cord is securely connected to the power adapter and the power supply LED LCD Monitor is firmly connected to the . Plug another electrical device into the power outlet to verify that the outlet is supplying proper voltage. Make sure all signal cables are installed. Power on but no screen image LED LCD Monitor Make sure the video cable supplied with the is tightly secured to the video output port on back of the computer. If not, tig
Resumen del contenido incluido en la página 8
First Setup Install the stand base LED LCD Monitor 1. Lay the flat on a table with the LED screen face down. To prevent the monitor from being scratched, put a piece of soft cloth on the table on which the screen will be set. 2. Unpack the base, one hand hold the monitor, the other hand attach the base to the stand. LED LCD Monitor 3. Stand the up. Disconnecting the stand base LED LCD Monitor LED LED 1. Lay the flat on a table with the screen face down. To prevent the LCD Monit
Resumen del contenido incluido en la página 9
Front View of the Product ① ② ③ ④ ⑤ ⑥ OSD Turn On/ Off ① ② Scroll Down/ Adjust Decrease/ Picture Mode/ Auto * Scroll UP/ Adjust Increase/ Audio Adjust/ Mute * ③ ④ Input select/ Confirm Selection Power On/ Off ⑤ ⑥ LED Indicator * Hot keys Instructions please see “Using the OSD Menu” on page 8. 7
Resumen del contenido incluido en la página 10
Rear View of the Product ① ② ③ ④ ⑤⑥ ① Power Input (+12V DC In) DisplayPort Input (DisplayPort 20 pin) ② ③ VGA Input (D-Sub 15 pin) HDMI input (HDMI 19 pin) ④ ⑤ Audio Input Headphone Jack ⑥ 8
Resumen del contenido incluido en la página 11
Quick Installation Connect either VGA, HDMI or DisplayPort Video Source from the monitor to the computer. 1. Make sure both monitor and computer are powered OFF. Please note. The monitor ships with VGA and DisplayPort cables only. HDMI cable may be sourced separately from a cable supplier. 2. Connect the audio cable from audio output of computer to the audio input of the monitor. 3. Connect the earphone to the earphone output terminal of the monitor. (Earphone sold separately). 4. Conn
Resumen del contenido incluido en la página 12
Basic Operation and Calibration/Reset Instructions Before using the LED LCD Monitor: Connect external equipment properly. Insert the power plug, and the power LED indicator will light orange. Power On/Off To turn the LED LCD Monitor on/off: Press button on the front. The power LED indicator light will be blue when the LED LCD Monitor is on. Using the OSD Menu Use OSD menus to adjust settings by using the menu button on the front of the LED LCD Monitor. Displays main menu 1 Ex
Resumen del contenido incluido en la página 13
Option 2: OSD & Power button lock – all 5 buttons including the “POWER” button are locked. Press and hold the 1 button and the ▼ button for 10 seconds to lock all 5 buttons. The LED LCD Monitor will show a “POWER BUTTON LOCKED” message for 3 seconds and the message will disappear automatically. Repeat this step to unlock. 11
