Resumen del contenido incluido en la página 1
VM9312
Instruction Manual
Resumen del contenido incluido en la página 2
Resumen del contenido incluido en la página 3
CONTENTS Thank you for choosing a Jensen product. We hope you will find the instructions in this owner’s manual clear and easy to follow. If you take a few minutes to look through it, you’ll learn how to use all the features of your new Jensen VM9312 Mobile Multimedia Receiver for maximum enjoyment. Preparation............................................................................................................................ 1 Installation .............................................
Resumen del contenido incluido en la página 4
ii
Resumen del contenido incluido en la página 5
VM9312 PREPARATION Congratulations on your purchase of the Jensen VM9312 • jLinkDirect 8-pin DIN for iPod Mobile Multimedia Receiver. • 3.5mm audio only Input WARNING! Never install this unit where operation and viewing could interfere with safe driving conditions. • RCA Audio / Video Input It’s a good idea to read all of the instructions before beginning the installation. We recommend having your Jensen VM9312 Chassis installed by a reputable installation shop. • 1.0 DIN (Import / ISO-DIN Mou
Resumen del contenido incluido en la página 6
BAND AS/PS DISP OPEN P E A DIO LO/ X V RC MUTE R SS U D M9312 EJECT S BAND AS/PS DISP OPEN PRESS AUDIO VM9312 EJECT LO/DX SRC MUTE BAND AS/PS DISP OPEN PRESS AUDIO VM9312 EJECT LO/DX SRC MUTE VM9312 INSTALLATION Pre-installation FINAL INSTALLATION CAUTION! Be careful not to damage the car wiring. 1. Press the metal levers on both sides to remove the half- sleeve from the radio. 4 5 3. Place the radio in front of the dashboard opening so the wiring can be brought through the mounting sleeve. PRE
Resumen del contenido incluido en la página 7
VM9312 WIRING DIAGRAM MediaLink See the MediaLink and Satellite Connections diagram for more information Bus * about connecting a satellite receiver and an iPod (through the MediaLink). SAT Radio WHITE * Satellite BLUE Receiver SAT L Connections SUB.W RED RED External Power Amplifier SAT R FRONT R WHITE YELLOW FRONT L RED WHITE REAR R WHITE RED REAR L *MediaLink YELLOW External AV System WHITE RED Antenna Jack YELLOW Rear Video 1 VIDEO OUT 1 Antenna YELLOW Rear Video 2 Harness Cord VIDEO OUT 2 A
Resumen del contenido incluido en la página 8
* ** VM9312 MEDIALINK AND SATELLITE CONNECTIONS SAT Radio SAT L SAT R *SAT Cable Kit: JXMC or XMDJEN100 (sold separately) MediaLink **XM or Sirius satellite tuner (sold separately) 3.5mm - Audio VIDEO LEFT RIGHT iPod Video iPod iPod Mini iPod Nano jLink iPod Cable (Sold Separately) 4 To Head Unit
Resumen del contenido incluido en la página 9
VM9312 CONTROLS AND INDICATORS Button Operation 4 3 2 1 1. OPEN Press to activate the automatic mechanical system and move the TFT monitor into viewing position. Press again to close the TFT. BAND AS/PS DISP OPEN 2. WIDE/DISP Press to adjust the display aspect of the picture to one of two settings: Full or Normal. WIDE CLOSE With the monitor closed, press the DISP button to cycle TILT PICTURE through information available on the LCD screen. 3. PICTURE/AS/PS Press to adjust the Brightness and
Resumen del contenido incluido en la página 10
VM9312 CONTROLS AND INDICATORS 9. IR Remote Control Receiver 4 3 2 1 10. ( ) DVD Mode: Press once to play back the previous chapter/ track. TUNER Mode: Press once to auto-search for the previous BAND AS/PS DISP OPEN available radio station. MENU Mode: Press once to move the cursor to the left. 11. ( ) DVD Mode: Press once for slow forward/slow reverse. WIDE CLOSE TILT PICTURE TUNER Mode: Press to go down one frequency step. MENU Mode: Press once to move the cursor down. 12. RESET Press to re
Resumen del contenido incluido en la página 11
VM9312 REMOTE CONTROL 8 3 35 4 1 5 2 9 MUSIC PHOTOS VIDEO iPod 6 10 DISP 13 7 28 26 WIDE 25 27 11 15 TILT 12 16 PRESET 14 34 20 33 MENU 18 19 32 17 22 23 21 24 SLOW SETUP 31 CLEAR 29 30 NOTE: Your remote control may differ slightly from the one pictured here. The above diagram is for illustrative purposes only. 7
Resumen del contenido incluido en la página 12
VM9312 Table 1: Remote Control Functions Button Function Name Ref# DVD VCD TUNER CD/MP3 SATELLITE iPod MENU 1 Enters the main menu of the Turns on/off PBC when play- Displays diagnostics screen Selects Photo mode disc ing VCD TITLE 2 Enters the title menu of the Plays first ten seconds of Selects Music mode disc each chapter/title MUTE 3 Toggles on/off audio output Toggles on/off audio output Toggles on/off audio output Toggles on/off audio output Toggles on/off audio output Toggles on/off audio
Resumen del contenido incluido en la página 13
VM9312 Table 1: Remote Control Functions Button Function Name Ref# DVD VCD TUNER CD/MP3 SATELLITE iPod OPEN/ 25 Opens/closes the TFT moni- Opens/closes the TFT moni- Opens/closes the TFT moni- Opens/closes the TFT moni- Opens/closes the TFT monitor Opens/Closes the TFT monitor CLOSE tor tor tor tor 26 Decreases monitor tilt angle Decreases monitor tilt angle Decreases monitor tilt angle Decreases monitor tilt angle Decreases monitor tilt angle Decreases monitor tilt angle 27 Increases monitor ti
Resumen del contenido incluido en la página 14
VM9312 USING THE TFT MONITOR Open/Close TFT Monitor Aspect Ratio Parking Brake Open TFT Monitor Press the DISP button (28) on the remote control or DISP/ Parking Brake Inhibit WIDE button (2) on the monitor to adjust the aspect ratio as Press the OPEN button (1) on the front panel or press the When the pink "Parking" wire is connected to the vehicle follows: brake switch, the front TFT monitor will display video ( ) button (25) on the remote control to activate the only when the parking brak
Resumen del contenido incluido en la página 15
VM9312 Table 3: Monitor Protective Measures Self OPEN Button Power Obstruction Protection Pressed Reconnected Monitor Unit stops at Monitor Monitor swiv- loading out obstruction swivels back els back to vertically point to the unit the unit Monitor Unit stops at Monitor Monitor swiv- loading in obstruction swivels back els back to vertically point to the unit the unit After the protective procedure is executed, normal operation is resumed by pressing the OPEN button (1) or disconnecting and
Resumen del contenido incluido en la página 16
VM9312 OPERATING INSTRUCTIONS Power On / Off Audio Control Menu System Reset The Audio Control feature allows you to easily adjust your To correct a system halt or other Press the /SRC button (6) on the unit (or the button (4) [RESET] Button audio system to meet the acoustical characteristics of your illegal operation, use the tip of a pen on the remote control) to turn the unit on. The buttons on the vehicle, which vary depending on the type of vehicle and its to press the reset button (12)
Resumen del contenido incluido en la página 17
VM9312 SETUP MENU To access system settings, press the SETUP button (31) on 3. Select a new value by using the touchscreen or pressing Setting Options Function the >> or << buttons (14, 22) on the remote control or the remote control or touch the button on the screen to the /\ or V buttons (18, 19) on the joystick. • AM Frequency Spacing - 9kHz Korea enter the “SETUP” menu. The “GENERAL” sub-menu • AM Frequency Band - 4. Use the touchscreen or press the >/|| button (18) on the appears hi
Resumen del contenido incluido en la página 18
VM9312 reverse driving stops, the monitor return to its original input Setting Options Function Setting Options Function mode. Sub.W 0 Subwoofer output IN phase Load Fac- Reset Select “Reset” to restore the P.VOL Sub-menu Features Phase tory factory default settings for the 180 Subwoofer output OUT OF Rating system only. Setting Options Function phase NOTE: Depending on your To reset the password, access the “RATING” menu and enter Source iPod Choose a source for which you installation, re
Resumen del contenido incluido en la página 19
VM9312 TUNER OPERATION 15. BAND: Touch to change between AM/FM bands Tuner TFT Display Manual Tuning 16. AS: Touch to automatically store stations To increase or decrease the tuning frequency one step: 17. Touch to view the SOURCE MENU and select a new 8 17 1 4 5 10 2 24 25 3 • Touch the or buttons on screen. playback source • Press the >> or << buttons (14, 22)on the remote 18. MEM: View screen used to enter current channel into control. preset memory 01:02 PM • Press the /\ or V buttons (
Resumen del contenido incluido en la página 20
VM9312 3. Touch the preset number in which you would like to store the current station (or press EXIT to cancel and close the menu). The preset number and station appears highlighted. Recalling a Station 1. Select a band (if needed). 2. Touch an on-screen preset button (6) to select the corresponding stored station. P1 87.5 MHz P2 90.1 MHz P3 98.1 MHz P4 106.1 MHz P5 107.9 MHz P6 102.9 MHz Auto Store (AS) To select six strong stations and store them in the current band: 1. Select a band (if
