Resumen del contenido incluido en la página 1
VOD108FR
10.2" OVERHEAD LCD
MONITOR WITH
DVD PLAYER
ON OFF AUTO
OPERATION
MANUAL
128-8810
Resumen del contenido incluido en la página 2
Resumen del contenido incluido en la página 3
Important Notice Installation of overhead products requires careful planning and preparation. Be extremely careful when working on a vehicle with side curtain air bags. Do not route wires near any portion of the side curtain air bag assemblies. This includes any anchor points in A, B, C or D pillars of the vehicle. Routing wires in these areas or running wires by the side curtain air bags can prevent the side curtain air bag from fully deploying which can result in personal injury to vehicle occ
Resumen del contenido incluido en la página 4
FEATURES Congratulations • 10.2” TFT (Thin Film Transistor) Active Matrix LCD (Liquid Congratulations on your purchase of the AUDIOVOX Crystal Display) Monitor. VOD108FR DVD Player with Drop-Down Video / Monitor. • Built-in DVD Player. The VOD108FR has been designed to give you and your family many years of video entertainment in the mobile • OSD (On Screen Display) for Control of Picture Quality and environment. Please read the directions that follow to Functions. familiarize yourself with the
Resumen del contenido incluido en la página 5
CONTROLS AND INDICATORS DIAGRAM (FRONT VIEW) 1. STOP () / CHANNEL UP (CH+) control a.) STOP () 56 3 4 12 - Press the STOP button once : Stops playback.Pressing the PLAY button will resume playback from where the movie was stopped. - Press the STOP button twice : Pressing the PLAY button will resume playback from the beginning of the 7 ON OFF AUTO DVD. b.) CHANNEL UP (CH+) Increases FLO TV channel number 8 Note: This control function control is available when the 9 overhead unit is used with an
Resumen del contenido incluido en la página 6
CONTROL FUNCTION DESCRIPTION 5. POWER ( ) Control 1 (BACK VIEW) Used to turn the system on/off. 6. FLO TV Indicator The mode LED will change from white to purple when the FLO 1. REAR IR SENSOR TV is connected. Transmits audio to wireless headphones, allows the remote 7. Dome Lights control to operate the ADV38FR and to control other Provide additional interior illumination. Accessories in the system. 8. Infrared Transmitter and Sensor CONTROL FUNCTION DESCRIPTION Transmits audio to wireless head
Resumen del contenido incluido en la página 7
TURNING THE UNIT ON OR OFF 1. Pushing in the Screen Release button will unlock the LCD screen and it will drop down slightly. Pivot the screen downward until a comfortable viewing angle is reached. The hinge friction will hold the screen in position while the system is in use. 2. Pressing the power button* on the unit or the remote control will turn the system on and off. When in use the internal backlighting will illuminate the controls. 3. After the unit has been turned on and is displaying a
Resumen del contenido incluido en la página 8
OVERHEAD DOME LIGHTS The Dome Lights integrated into the unit are controlled by a three position slide switch. Sliding the switch to the ON position will turn the lights ON. The OFF position will prevent the lights from turning ON with the vehicle's interior lighting and the auto position will allow the lights to turn ON and OFF with the vehicle's interior lighting. Refer to the Installation Guide for wire connections. Do not leave the vehicle unattended with the dome light switch in the ON posi
Resumen del contenido incluido en la página 9
SOURCE FEATURE AV1 The AV1 input may be connected to a external video source, video game system, or other audio / video devices. To access the audio/video inputs, turn the unit on and press the S (source) button on the VOD108FR or the Source button on the remote control until "AV1" is displayed on the screen. Turn the video source component on with its power button or remote control and it is now ready to play the audio and video signals from the source connected . Note:AV1 sources are available
Resumen del contenido incluido en la página 10
USING THE WIRELESS GAME CONTROLLER The Game Controller transmits to the VOD108FR with two infrared transmitters located on the front of the Game Controller. The Game Controller must be pointed toward the unit for correct operation. Press the source button on the remote control or the unit until GAME CONTROLLER FUNCTIONAL DESCRIPTION 1. Install two AAA batteries in the Game Controller. Observe the correct polarity. 2. Use the ON/OFF selector switch to turn on the Game Controller. A list of ten ga
Resumen del contenido incluido en la página 11
REMOTE CONTROL OPERATION MAIN FUNCTION OPERATION POWER MONITOR SELECT EJECT 1 M1 M2 36 2 DVD FLO DVD SOURCE 3 35 4 SOURCE 12 3 5 FMM ON/OFF 34 4 5 6 6 FMM SELECT 7 8 9 7 IRT ON/OFF VOLUME 0 8 33 DISPLAY RETURN MUTE PIX 9 32 SYSTEM 10 31 MENU 11 30 12 29 13 OK 14 MODE 28 15 MENU SETUP Battery Installation 16 Before attempting to operate your Remote Control, install the 27 17 REPEAT AUDIO ZOOM batteries as described below. 26 18 1) Turn the Remote Control face down. Using your finger, slide SUBTIT
Resumen del contenido incluido en la página 12
* Function control is available on the unit and the Remote Control. ** Function not available in this model. *** FLO TV function only available when optional FLO TV module is installed. Note: Refer to Appendix A FLO TV for FLO TV operating instructions.. 1. POWER Button* Press this button to turn the unit ON and OFF. 2. MONITOR SELECT Button M1 Button – Sets the remote control code to allow control of the unit set to M1 mode. M2 Button** – Sets the remote control code to allow control of the uni
Resumen del contenido incluido en la página 13
8. IRT ON/OFF Button Turns the Infrared Transmitter ON or OFF for IR Wireless Headphones. 9. DISPLAY Button Press to display the current disc information while the disc is playing. Press the cursor () buttons to select the Title or Chapter. For Title/Chapter selection use the numeric buttons to enter the desired Title Chapter selection. 10. RETURN Button Press for the disc root menu. Pressthe button again to resume to disc playback. 11. SYSTEM MENU Button Allow the user to access the system me
Resumen del contenido incluido en la página 14
15. MENU / SETTINGS Button a.) MENU Button Pressing the MENU button in DVD mode will cause the DVD root menu to be displayed. When using the USB device, pressing theMENU button will cause the root menu to be displayed. Pressing the MENU button while listening to MP3 files has no effect as the operation is prohibited. Note: Pressing the FLO TV button will access the FLO TV mode and disable the DVD and USB functions. To return to Dvd control functions press the DVD button.. b.) SETTINGS Button ( )
Resumen del contenido incluido en la página 15
22. PAUSE Button (II) Press to pause playback. Pressing the PAUSE button again or pressing the PLAY Button will resume normal playback. 23. PLAY Button* Press to activate the play mode while a disc is loaded in the disc compartment. 24. SCAN FORWARD Button () Press to search in a forward direction. Press repeatedly to change the search Speed from 2, 4, 8, 16 times the normal speed. 25. NEXT Button() Press to skip to the next chapter or track. 26. A-B Button Allow user to repeat disc playback f
Resumen del contenido incluido en la página 16
28. MODE** / SETUP Button a.) MODE Button ** When in FLO TV mode pressing the MODE button toggles between FLO TV and an auxiliary A/V source attached to the FLO TV module. (NOTE: your system may not have an auxiliary source). b.) SETUP Button When in DVD mode pressing the SETUP button will display the Setup Menu which allows the user to change the DVD player options such as OSD Language, Video, Rating etc. Refer to the settings and adjustment section for more information. 29. INFORMATION Button(
Resumen del contenido incluido en la página 17
34. NUMBER Buttons When DVD mode these buttons allow the user to enter numbers 0 to 9 for selection of selection of CD tracks, DVD chapters and password. When FLO TV mode these buttons allow the user to select favorite channels and for PIN entry for parental controls. *** 35. DVD Source Button This button is only active when remote control is in DVD mode. Each time the button is pressed one of the sources (DVD or USB) will be selected. If the USB is not plugged in, the unit it will remain on DVD
Resumen del contenido incluido en la página 18
MENU ADJUSTMENT The System Menu Contains features and options that let you customize your system to change the screen mode display, OSD language and source default. 1) Press the SYSTEM MENU button on the remote, the main page of the system menu will appear on screen. 2) Use the cursor buttons or to select the desired item in the main page and press the ENTER button to select. 3) The sub menu will appear on screen. 4) Use the cursor buttons or to select an item in the sub menu and then press
Resumen del contenido incluido en la página 19
FMM SELECT FMM ON/OFF options - Turns the FM Modulator on or off. FMM SELECT option - Selects the wireless FM Modulator Frequency (CH1 88.1MHz, CH2 88.3MHz, CH3 88.5MHz, CH4 88.7MHz, CH5 88.9MHz, CH6 89.1MHz, CH7 89.3MHz, CH8 89.5MHz, CH9 89.7MHz, CH10 89.9MHz, CH11 90.1MHz, CH12 90.3MHz, CH13 90.5MHz, CH14 90.7MHz, Ch15 90.9MHz, CH16 91.1MHz) SYSTEM MENU FMM PICTURE CONTROL FMM ON FMM FMM OFF OSD LANGUAGE FMM SELECT SOURCE DEFAULT DVD SCREEN MODE OSD LANGUAGE This allows the user to select the
Resumen del contenido incluido en la página 20
SOURCE DEFAULT DVD This allows the user to set the system default source to DVD (via System Menu). Note: If selected default source is set to DVD every time the unit’s power is cycled with the source set to something other then DVD, the unit will power up and automatically switch the source over to DVD. Unit will be set to Last Memory on as the default mode of operation. • Selection of Source default can only be made from within the system menu. SYSTEM MENU SOURCE DEFAULT DVD ON PICTURE CONT
