Resumen del contenido incluido en la página 1
SyncMaster 305T
Resumen del contenido incluido en la página 2
Notational Failure to follow directions noted by this symbol could result in bodily harm or damage to the equipment. Prohibited Important to read and understand at all times Do not disassemble Disconnect the plug from the outlet Do not touch Ground to prevent an electric shock Power When not used for extended period of time, set your computer to DPMS. If using a screen saver, set it to active screen mode.
Resumen del contenido incluido en la página 3
Do not use a damaged or loose plug. This may cause electric shock or fire. Do not pull the plug out by the wire nor touch the plug with wet hands. This may cause electric shock or fire. Use only a properly grounded plug and receptacle. An improper ground may cause electric shock or equipment damage. Insert the power plug firmly so that it does not come loose. A bad connection may cause fire. Do not excessively bend the plug and wire nor place hea
Resumen del contenido incluido en la página 4
Installation Be sure to contact an authorized Service Center when installing your set in a location with heavy dust, high or low temperatures, high humidity, and exposed to chemical substances and where it operates for 24 hours such as at airports, train stations etc. Failure to do so may cause serious damage to your set. Place your monitor in a location with low humidity and a minimum of dust. Failure to do so may cause electric shock or fire inside the monitor.
Resumen del contenido incluido en la página 5
Do not install the product in places with poor ventilation, for instance, a bookshelf, closet, etc. Any increase in internal temperature may cause fire. Put down the monitor carefully. Failing to do so may damage the monitor. Do not place the monitor face down. This may damage the TFT-LCD surface. The installation of the bracket must be done by a qualified professional. Installing the bracket by unqualified personnel may result in injury. Always use the mounting de
Resumen del contenido incluido en la página 6
Use the recommended detergent with a smooth cloth. If the connector between the plug and the pin is dusty or dirty, clean it properly using a dry cloth. A dirty connector may cause electric shock or fire. Make sure to unplug the power cord before cleaning the product. Otherwise, this may cause electric shock or fire. Unplug the power cord from the power outlet and wipe the product using a soft, dry cloth. Do not use any chemicals such as wax, benzene, alcohol, thinners
Resumen del contenido incluido en la página 7
If the monitor is dropped or the casing is damaged, turn the monitor off and unplug the power cord. Then contact a Service Center. The monitor may cause a malfunction, electric shock or fire. Disconnect the plug from the outlet during storms or lightning or if it is not used for a long period of time. Failure to do so may cause electric shock or fire. Do not try to move the monitor by pulling only the wire or the signal cable. This may cause a breakdown, electric shock o
Resumen del contenido incluido en la página 8
Do not insert metal objects such as chopsticks, wire and gimlet or inflammable objects such as paper and match into the vent, headphone port or AV ports or etc. This may cause electric shock or fire. If an alien substances or water enters the product, turn the product off, unplug the power connector from the wall outlet and contact a Service Center. When viewing a fixed screen for an extended period of time, residual image or blurriness may appear. Change the mode to energy sa
Resumen del contenido incluido en la página 9
Place the product out of children's reach, as they could damage by hanging onto it. A falling product may cause injury to the person or even fatality. When not using the product for an extended period of time, keep the product unplugged. Otherwise, this may cause heat emission from the accumulated dirt or degraded insulation, causing electric shock or fire. Do not place your children's favorite toys or any other objects of interest on the product. Children may try to climb on
Resumen del contenido incluido en la página 10
Please make sure the following items are included with your monitor. If any items are missing, contact your dealer. Contact a local dealer to buy optional items. Unpacking Manual Warranty Card Quick Setup Guide (Not available in all User's Guide locations) Cable
Resumen del contenido incluido en la página 11
DVI-D (Dual link) Cable Power Cord Sold separately USB Cable (A-B Type cable) Front 1. Brightness button [] Push the button to adjust brightness. : The screen is getting dark. : The screen is getting bright. 2. Power button [] Turns the monitor on/off. / Power indicator / The blue light is on in its normal working condition and blinks when setting the adjustments of the monitor. See PowerSaver described in the manual for further information regardin
Resumen del contenido incluido en la página 12
(The configuration at the back of the monitor may vary from product to product.) 1. DOWN : Connect the DOWN port of the USB monitor and a USB device with the USB cable. To use DOWN, you have to connect the UP to the PC. Make sure to use the USB cable supplied with this monitor to connect the monitor's UP port and your computer's USB port. 2. UP : Connect the port of the monitor and the USB port of the UP computer with the USB cable. DVI IN Connect t
Resumen del contenido incluido en la página 13
Stand Stopper Remove the fixing pin on the stand to lift the monitor up and down. See Connecting the Monitor for further information regarding cable connections.
Resumen del contenido incluido en la página 14
Connecting the Monitor 1. Connect the power cord for your monitor to the POWER port on the back of the monitor. Plug the power cord for the monitor into a nearby outlet. Using the DVI (Digital) connector on the video card. 2. Connect the DVI-D (Dual link) Cable to the Port on the back of your Monitor. DVI IN [ DVI IN] Turn on your computer and monitor. If your monitor displays an image, installation is completed. Connecting USB You can use a USB device such as a mouse,
Resumen del contenido incluido en la página 15
Data Rate 480 Mbps 12 Mbps 1.5 Mbps 2.5W 2.5W 2.5W Power (Max., each (Max., each (Max., each Consumption port) port) port) Connect the UP port of the monitor and the USB port of the computer with the USB cable. To use port, you have to connect the UP (Upstream Cable) to the PC. DOWN Make sure to use the USB cable supplied with this monitor to connect the monitor's UP port and your computer's USB port. Connect the DOWN port of the USB monitor and a USB devi
Resumen del contenido incluido en la página 16
When connecting a device to the DOWN port of the monitor, connect the device using a cable appropriate to the device. (For the purchase of the cable and external devices, ask the service center of the corresponding product.) The company is not liable for problems or damages to an external device caused by using an unauthorized cable for the connection. Some products do not follow the USB standard, and it may cause a malfunction of the device. If the device malfunctions even if
Resumen del contenido incluido en la página 17
Tilt angle Using ( ), You can adjust the tilt anlgle within a range of 3° forward to 25° backward for the most comfortable viewing angle. Attaching a Base This monitor accepts a 200 mm x 100 mm / 100 mm x 100 mm VESA-compliant Mounting interface pad. A. Monitor B. Mounting interface pad (Sold separately) 1. Turn off your monitor and unplug its power cord. 2. Lay the LCD monitor face-down on a flat surface with a cushion beneath it to protect the screen. 3. Re
Resumen del contenido incluido en la página 18
SyncMaster 305T Model Check List Before calling for service, check the information in this section to see if you can remedy any problems yourself. If you do need assistance, please call the phone number on the Information section or contact your dealer. Symptom Check List Solutions No images on the Is the power cord connected Check the power cord connection screen. I cannot turn properly? and supply. on the monitor. If the power is on, reboot the If the initial screen (th
Resumen del contenido incluido en la página 19
LED is blinking but no Is the frequency properly Adjust the frequency properly by images on the screen. adjusted when checking the referring to the video card manual Display Timing on the menu? and Preset Timing Modes. (The maximum frequency per resolution may differ from product to product.) There are only 16 Have the Windows colors Windows ME/2000/XP : colors shown on the been set properly? Set the colors properly at the screen. Control Panel Display The screen colors . Setting
Resumen del contenido incluido en la página 20
General General Model Name SyncMaster 305T LCD Panel Size 30" inch Wide (75 cm) Display area 641.28(H) x 400.8(V) Pixel Pitch 0.2505(H) x 0.2505(V) Synchronization Horizontal 49.3kHz, 98.7kHz +/- 2kHz Vertical 60Hz +/- 2Hz Display Color 8 bit color (16.7M) Resolution Optimum resolution 2560x1600@60Hz ,1280x800@60Hz Maximum resolution 2560x1600@60Hz ,1280x800@60Hz Input Signal, Terminated DVI Compliant Digital RGB 0.7 Vp-p ± 5% TMDS(Transition Minimized Differential Signaling) Maximum
