Resumen del contenido incluido en la página 1
DPX-MP4030(M)_U.S r4 02.6.18 8:01 PM Page 1
DOUBLE DIN SIZED CD/CASSETTE RECEIVER
-
DPX MP4030
INSTRUCTION MANUAL
-
DPX 3030S
-
DPX 3030
© B64-2319-10/05 (M;TKR)
Resumen del contenido incluido en la página 2
DPX-MP4030(M)_U.S r1 02.2.19 10:31 AM Page 2 Contents Safety precautions......................3 Cassette player features...........17 Function Set..............................23 Playing Cassette Tapes Function Set About CDs...................................5 Fast Forwarding and Rewinding Illumination Color Mode About Cassette tape...................5 Dolby B NR Contrast Adjustment Notes on playing MP3 ................6 Selecting the Tape type Touch Sensor Tone General features .............
Resumen del contenido incluido en la página 3
DPX-MP4030(M)_U.S r1 02.2.19 10:31 AM Page 3 Safety precautions IMPORTANT INFORMATION 2WARNING 2CAUTION About the disc changer/CD player to To prevent injury or fire, take the To prevent damage to the machine, be connected: following precautions: take the following precautions: To connect a disc changer having the "O-N" switch to this unit, set the "O-N" switch to "N". • Insert the unit all the way in until it is fully • Make sure to ground the unit to a negative locked in place. Otherwise it
Resumen del contenido incluido en la página 4
DPX-MP4030(M)_U.S r1 02.2.19 10:31 AM Page 4 Safety precautions Cleaning the Unit The marking of products using lasers NOTE If the faceplate of this unit is stained, wipe it (Except for some areas) • If you experience problems during with a dry soft cloth such as a silicon cloth. installation, consult your Kenwood dealer. If the faceplate is stained badly, wipe the stain CLASS 1 off with a cloth moistened with neutral • If the unit does not seem to be working LASER PRODUCT cleaner, then wipe
Resumen del contenido incluido en la página 5
DPX-MP4030(M)_U.S r1 02.2.19 8:15 PM Page 5 About CDs About Cassette tape Handling CDs CD cleaning Cleaning the tape head • Don’t touch the recording surface of the CD. Clean from the center of the disc and move When there’s noise or the sound quality is bad outward. during tape play the tape head maybe dirty, clean the tape head. About Cassette tape • If the tape is slack tighten it. • If the cassette tape label is peeling off glue it on again. Removing CDs • Don’t use deformed cassette tape
Resumen del contenido incluido en la página 6
DPX-MP4030(M)_U.S r1 02.2.19 10:31 AM Page 6 Notes on playing MP3 (DPX-MP4030) This unit can play MP3(MPEG1, 2, 2.5 Audio Layer 3). Note, Entering ID3 tag however, that the MP3 recording media and formats acceptable The Displayable ID3 tag is ID3 version are limited. When writing MP3, pay attention to the following 1.x. restrictions. For the character code, refer to the List of Codes. Acceptable media The MP3 recording media acceptable to this unit are CD-ROM, CD-R, and CD-RW. Entering file a
Resumen del contenido incluido en la página 7
DPX-MP4030(M)_U.S r1 02.2.19 10:31 AM Page 7 When a File Search is executed with file ¡$ being played ... MP3 playing order When selected for play, Folder Search, File Search, or for Folder Operation of the button Current Select, files and folders are accessed in the order in which they were file number 4 Button ¢ Button written by the CD writer. Because of this, the order in which they are expected to be played Beginning of file may not match the order in which they are actually played. Y
Resumen del contenido incluido en la página 8
DPX-MP4030(M)_U.S r1 02.2.19 10:31 AM Page 8 General features Power 4 ¢ u / d DSP EQ/AUD SRC FM/AM Turning ON the Power Press the [SRC] button. Turning OFF the Power Press the [SRC] button for at least 1 second. DISC Selecting the Source DISP COLOR Press the [SRC] button. NAME S.A Source required Display SRC AUD PWR OFF B.NR MTL B.S FNC SCRL M.RDM Tuner "TUNER" SCN RDM REP ATT Tape "TAPE" CD "CD" External disc "CD-CH"/ "MD-CH" DISP/NAME ATT 38 COLOR/S.A #1 – 3 Standby (Illumination onl
Resumen del contenido incluido en la página 9
DPX-MP4030(M)_U.S r1 02.2.19 10:31 AM Page 9 When it’s ON, the "ATT" indicator blinks. When operation stops for 10 seconds, the Equalizer type at that time is registered and the Equalizer Control mode automatically closes. Equalizer Control You can recall the best sound setting preset for different types of Adjustment of Equalizer type at EASY the music. Adjusting the effect of an Equalizer type selected in when is "EASY"
Resumen del contenido incluido en la página 10
DPX-MP4030(M)_U.S r1 02.2.19 10:31 AM Page 10 General features Adjustment of Equalizer type at PRO Memory preset of adjustment of Equalizer type Adjusting the effect of an Equalizer type selected in can be preset. Control> when is "PRO". 1 Refer to (page 10) to 1 Refer to (page 9) to select the Equalizer adjust the Equalizer type. type. 2 Preset the adjusted value 2
Resumen del contenido incluido en la página 11
DPX-MP4030(M)_U.S r1 02.2.19 10:31 AM Page 11 Adjustment Item Display Range Spectrum Analyzer Select Balance "BAL" Left 15 — Right 15 Selecting the Spectrum Analyzer display. Fader "FAD" Rear 15 — Front 15 Non Fader Output "N-F" On/Off 1 Enter the Spectrum Analyzer Select mode Press the [S.A] button for at least 1 second. 4 Exit the Audio Control mode "SPEANA" is displayed. Press the [AUD] button. 2 Select the Spectrum Analyzer Press the [S.A] button. Each time the button is pressed, the Spec
Resumen del contenido incluido en la página 12
DPX-MP4030(M)_U.S r1 02.2.19 10:31 AM Page 12 General features • When operation stops for 10 seconds the name at that time is Station/Disc Naming (SNPS/DNPS) registered, and Name Set mode closes. Attaching a title to a Station or CD. • Memory numbers - FM & AM: 30 stations 1 Receive/play the station/disc you want to attach a title to - Internal CD player: 10 discs •A title can't be attached to MD or MP3 media. - External CD changer/ player: Varies according to the CD changer/ • Disc Naming c
Resumen del contenido incluido en la página 13
DPX-MP4030(M)_U.S r1 02.2.19 10:31 AM Page 13 In MP3 source (DPX-MP4030) Illumination Color Select Information Display Setting the color of the display. Track Time "P-Time" Folder name "Folder" 1 Enter the Illumination Color Select mode File name "File" Press the [COLOR] button. Song title & Artist name "Title" "Illumi" is displayed. Album name "Album" 2 Select the Illumination Color Charactor Press the [COLOR] button. Clock Each time the button is pressed, the Illumination Color switches In
Resumen del contenido incluido en la página 14
DPX-MP4030(M)_U.S r1 02.2.19 1:42 PM Page 14 General features User Illumination Color Setting Adjusting Clock The Illumination Color by the adjustment of RGB can arbitrarily 1 Select the clock display set. Press the [DISP] button. 1 Enter the Illumination Color Select mode 2 Enter clock adjustment mode Press the [COLOR] button. Press the [DISP] button for at least 1 second. "Illumi" is displayed. The ‡ indicator blinks. 2 Select the Color for adjustment 3 Adjust the hours Press the [4] or [¢]
Resumen del contenido incluido en la página 15
DPX-MP4030(M)_U.S r1 02.2.19 10:31 AM Page 15 Tuner features Tuning SRC 4 ¢ FM/AM Selecting the station. 1 Select tuner source Press the [SRC] button. Select the "TUNER" display. 2 Select the band DISC Press the [FM] or [AM] button. Each time the [FM] button is pressed it switches between the FM1, FM2, and FM3 bands. DISP COLOR NAME S.A 3 Tune up or down band SRC AUD PWR OFF Press the [4] or [¢] button. B.NR MTL FNC B.S SCRL M.RDM SCN RDM REP ATT During reception of stereo stations the
Resumen del contenido incluido en la página 16
DPX-MP4030(M)_U.S r1 02.2.21 11:46 AM Page 16 Tuner features Station Preset Memory Preset Tuning Putting the station in the memory. Calling up the stations in the memory. 1 Select the band 1 Select the band Press the [FM] or [AM] button. Press the [FM] or [AM] button. 2 Select the frequency to put in the memory 2 Call up the station Press the [4] or [¢] button. Press the [#1] — [#6] button. 3 Put the frequency in the memory Press the [#1] — [#6] button for at least 2 seconds. The preset numbe
Resumen del contenido incluido en la página 17
DPX-MP4030(M)_U.S r1 02.2.19 10:32 AM Page 17 Cassette player features Playing Cassette Tapes SRC 4 0 ¢ FM/AM When the Cassette Tape is inserted Press the [SRC] button. Select the "TAPE" display. When there's a Cassette Tape inserted, the indicator is ON. When you want to listen to the reverse side DISC Press the [38] button. Eject the Cassette Tape DISP COLOR Press the [0] button. NAME S.A SRC AUD PWR OFF B.NR MTL FNC B.S SCRL M.RDM SCN RDM REP ATT Fast Forwarding and Rewinding 38 B.N
Resumen del contenido incluido en la página 18
DPX-MP4030(M)_U.S r1 02.2.19 10:32 AM Page 18 Cassette player features 1 Designate the song to skip Selecting the Tape type Press number buttons on the remote. Press the [MTL] button. 2 Skipping to a later song Each time the button is pressed the Tape type switches as Press the [¢] button. shown below. "MTL" indicator Tape type Skipping to a previous song ON CrO2 (Type II), FeCr (Type III), Press the [4] button. Metal (Type IV) Canceling DPSS OFF Normal (Type I) Press the [38] button. • Durin
Resumen del contenido incluido en la página 19
DPX-MP4030(M)_U.S r1 02.2.19 10:32 AM Page 19 CD/MP3/External disc control features Music Repeat 4 ¢ SRC 0 Repeating the present song. Press the [REP] button. Each time the button is pressed the Music Repeat turns ON or OFF. When it's ON, "Repeat" is displayed. DISC DISP COLOR NAME S.A SRC AUD PWR OFF B.NR MTL B.S FNC SCRL M.RDM SCN RDM REP ATT 38 SCRL SCN RDM/#3 REP #5 M.RDM DISC–/DISC+ Random indicator indicator Track number Track time Disc number Scan indicator Repeat indicator MP3
Resumen del contenido incluido en la página 20
DPX-MP4030(M)_U.S r1 02.2.19 10:32 AM Page 20 CD/MP3/External disc control features Display Disc player Playing CD & MP3 "CD-CH" CD changer When there is no disc inserted "MD-CH" MD changer Insert a disc. Pause and play • The models that can play MP3 is shown below. Press the [38] button. DPX-MP4030 Each time the button is pressed it pauses and plays. During MP3 is playing, the "MP3" indicator is ON. • When a disc is inserted, the indicator is ON. • Disc #10 is displayed as "0". • The functi
