Resumen del contenido incluido en la página 1
Radio / Cassette
Bologna
RCR 126
Operating instructions
BA Bolo RCR 126 d 1 01.02.2001, 12:49 Uhr
Resumen del contenido incluido en la página 2
1 2 3 4 5 6 7 8 9 10 11 12 13 14 19 18 15 17 16 3 BA Bolo RCR 126 d 3 01.02.2001, 12:49 Uhr PORTUGUÊS ESPAÑOL SVENSKA NEDERLANDS ITALIANO FRANÇAIS ENGLISH DEUTSCH
Resumen del contenido incluido en la página 3
Contents Short instructions ........................ 19 Radio operation with RDS ........... 25 Tape operation.............................. 30 AF - Alternative frequency .................... 25 Inserting a tape ..................................... 30 Important notes ............................ 22 REG - regional programme ................... 25 Removing a tape ................................... 30 Precautions ........................................... 22 Selecting a waveband ................
Resumen del contenido incluido en la página 4
Short instructions 1 On Off 2 LD GEO – Volume Loudness - When listening at a low To adjust the balance (left/right) and level, the Loudness function creates a fader (front/rear) with the rocker switch. more natural sound by boosting the low frequency range. To switch the Loudness on/off: Press LD. For more information, read chapter This unit can also be switched on and “DSC programming”. off with the Release Panel B. Fader front Also, when being connected correctly, Fader rear Balance left you m
Resumen del contenido incluido en la página 5
4 DSC (Direct Software Control) 7 lo/dx : Display Use the DSC function to customise To alter the automatic seek tuning sen- Radio operation: certain programmable, basic settings to sitivity. suit your personal needs and prefe- If “lo” is displayed, the radio will only rences. See chapter “DSC pro- pick up strong, local stations (low sensi- gramming” for more information. tivity). NDR1 NDS - Station abbreviation or If “lo” does not light up, the radio will frequency also pick up weaker, distant s
Resumen del contenido incluido en la página 6
; PROG button/Fast winding > 1, 2, 3, 4, 5, 6 - preset buttons @ M•L You can store six stations on each FM To select the MW or LW waveband. To switch to the other side of the memory bank (I, II, T). Press button as many times until the cassette tape: To store a station: Press button during desired band is adjusted. Press both buttons simultaneously. radio operation and hold down until the The display shows TR1-PLAY or TR2-PLAY. radio resumes play. A FMT - FM, Travelstore To recall a station: Sel
Resumen del contenido incluido en la página 7
Important notes Precautions B RELEASE / CODE-LED C Rocker switch Release panel - detachable face. Seek tuning Before starting to use your new car radio, For extra anti-theft protection, you please read the information on “Traffic safe- should take the detachable face with ty” and “Anti-theft protection” carefully. you when leaving your car. To remove it: Traffic safety Press RELEASE. To re-install the panel: Insert on the left As the driver of a motor vehicle, it is your Up side first with the c
Resumen del contenido incluido en la página 8
Anti-theft protection Installation/Connection Release panel Fitting the release panel • Insert the panel on the left side first with This unit is equipped with a release panel If you would like to install this equipment the cassette slot facing up and then (detachable face). yourself or add any new components, please You can remove the control face at the push • press on the right until it locks in. read the enclosed installation and connec- of a button. tion instructions carefully. The unit is
Resumen del contenido incluido en la página 9
further attempts, the waiting time extends to Now the security coding system is active. If the display shows “CODE ERR”, you have one hour. The display will briefly show “CODE” each entered a wrong code. Re-enter the correct After 20 unsuccessful attempts, the display time the set is turned on. code after the waiting time (“CODE” will ap- will show “SERVICE”. In this case you can no pear in the display). longer re-start the unit. If you switch off the set while it is blocked, the Re-start follow
Resumen del contenido incluido en la página 10
Radio operation with RDS (Radio Data System) Permanent 12 V supply and the + ignition The Radio Data System offers you more switching on the radio or recalling one of the lead must be connected correctly (as illustra- convenience when listening to FM radio sta- stored frequencies, the unit is automatically ted in the installations instructions). tions. searching for an alternative frequency. „LED 1“ must be adjusted in the DSC mode. More and more radio stations have begun to “SEARCH” will disapp
Resumen del contenido incluido en la página 11
take advantage of the full RDS service, switch Automatic tuning >>, or backwards using the << button, e.g. to “REG OFF”. NDR 1, 2, 3, 4, N-JOY (North German broad- caster). • Press the REG button briefly. For this it is necessary that the stations have When active, “REG ON” will be briefly dis- been received at least once and that “AF” has played each time the radio is switched on. been activated before (lights up in the dis- play). Up Selecting a waveband For this purpose, you may start Travels
Resumen del contenido incluido en la página 12
Storing stations Automatically storing the stron- Scanning stored stations gest stations with Travelstore with Preset Scan On FM, you can store six stations on the preset buttons 1 to 6 for each of the memory You can automatically store the six most You can have all of the stored stations played banks I, II and T. powerful FM stations of your current recepti- briefly on all wavebands. On MW/LW, you can store six stations each. on area sorted according to their signal On FM, you can scan the stat
Resumen del contenido incluido en la página 13
Scanning stations with Selecting the seek tuning sensi- Radio-Scan tivity Beginning with the station currently tuned in, You can alter the automatic seek tuning you can scan the waveband. The radio will sensitivity. play each station for 8 seconds. If “lo” is displayed, the radio will only pick up To start the scan: strong, local stations (low sensitivity). If “lo” does not light up, the radio will also pick • Press SC briefly. up weaker, distant stations (high sensitivity). The scanned frequenc
Resumen del contenido incluido en la página 14
Receiving traffic programme stations with RDS-EON Many FM broadcasters offer traffic messa- Traffic announcement priority Alternatively: ges for their service area at regular intervals. on/off b) Switch off the priority for traffic an- All traffic programme stations transmit a spe- nouncements: If the priority for traffic announcement pro- cial carrier signal alongside their program- • Press TA. grammes is activated, “TA” will light up in the mes, which is decoded by your car radio. If “TA” will
Resumen del contenido incluido en la página 15
Tape operation Inserting a tape Fast Forward/Rewind PROG selector (To change the tape direction during Fast Forward • Turn on the set. cassette playback) • Press FF. • Insert a tape. • Press FR and FF simultaneously. At the end of a tape side, the mecha- nism changes directions automatically At the end of a tape side, the mechanism Insert the tape with side A or 1 showing up, the to play the other side. open side facing to the right. changes directions automatically to play the Stopping Fast For
Resumen del contenido incluido en la página 16
DSC programming DSC (Direct Software Control) allows you to BEEP Confirmation tone for all RM (Radio Monitor) customise certain programmable, basic set- functions which require a With RM-ON, the unit will tings to suit your personal needs and prefe- button to be pressed for automatically switch to the rences and then store them. more than 2 seconds. tuner whenever the casset- The basic settings for this audio equipment The volume can be adju- te is fast winding. were made at the factory. In the
Resumen del contenido incluido en la página 17
Appendix Overview of the DSC factory Care notes Specifications settings Release panel Amplifier To ensure that the unit functions properly it is Output power: 4 x 20 W RMS power TA VOL : 4 important that the contacts between the re- acc. to DIN 45324 BEEP : 3 lease panel and the head unit are free from (14.4V), LED (Code) : 1 any foreign particles. 4 x 30 W max. power LOUD : 4 If necessary, clean the contacts using a cot- RM : OFF ton swab soaked with alcohol. Tuner LOCAL : 1 Wavebands DIS : 1 M
Resumen del contenido incluido en la página 18
Blaupunkt-Werke GmbH Bosch Gruppe 5/96 K7/VKD 8 622 400 771 BA Bolo RCR 126 d® 18 03.06.2002, 13:35 Uhr
