Resumen del contenido incluido en la página 1
AM/FM RADIO WITH ELECTRONIC TUNER
COMPACT DISC PLAYER
OWNER'S MANUAL
86120-YZA59
RECEIVER ASSY, RADIO
Please read this manual before using the product.
We suggest that you keep this manual in a safe place
after reading for future reference.
Resumen del contenido incluido en la página 2
Contents Safety precautions 3 Menu system 19 Menu System Notes 4 Activating Security Code Deactivating Security Code About CDs 5 Touch Sensor Tone Manual Clock Adjustment About AAC, MP3 and WMA 6 Display Illumination Control Dimmer General features 7 Switching preout Power Built-in Amp Setting Selecting the Source Supreme Setting Volume B.M.S. (Bass Management System) Attenuator B.M.S. Frequency Offset System Q AMP Control Audio Control CRSC (Clean Reception System Circuit) Adjusting the detail
Resumen del contenido incluido en la página 3
Safety precautions About CD players/disc changers 2WARNING connected to this unit To prevent injury or fire, take the Kenwood disc changers/ CD players released in following precautions: 1998 or later can be connected to this unit. • To prevent a short circuit, never put or leave any Refer to the catalog or consult your Kenwood metallic objects (such as coins or metal tools) dealer for connectable models of disc changers/ inside the unit. CD players. • Mounting and wiring this product req
Resumen del contenido incluido en la página 4
Notes • If you experience problems during installation, About DAB Tuner control consult your Kenwood dealer. Refer to A group on the Instruction manual of DAB Tuner KTC-9090DAB (optional accessory) for the • When you purchase optional accessories, check control method of DAB Tuner function. with your Kenwood dealer to make sure that they However, the following control methods of the work with your model and in your area. function for this unit may be differed from the • If the unit fails
Resumen del contenido incluido en la página 5
About CDs Handling CDs Removing CDs • Do not touch the recording surface of the CD. When removing CDs from this unit pull them out horizontally. CDs that cannot be used • CDs that are not round cannot be used. • CD-R and CD-RW are easier to damage than a normal music CD. Use a CD-R or a CD-RW after reading the caution items on the package etc. • Do not stick tape etc. on the CD, or use a CD with • CDs with coloring on the recording surface or CDs tape stuck on it. that are dirty cannot be u
Resumen del contenido incluido en la página 6
About AAC, MP3 and WMA The playable AAC/MP3/WMA file (hereafter called The maximum number of characters for Audio file) and the media format has the following display limitation. The Audio file, which is not comforming File/Folder name: 64 characters to the specification, may not play normally, or the MP3 ID3 Tag/ WMA Contents property/ AAC song file and folder names may not display correctly. information: 30 characters Playable Audio file • AAC, MP3, WMA • File/Folder name is the number o
Resumen del contenido incluido en la página 7
General features DISP VOL Control knob ATT Q SRC Clock display LOUD indicator ATT indicator Power Volume Turning ON the Power Increasing Volume Press the [SRC] button. Turn the [VOL] knob clockwise. Turning OFF the Power Decreasing Volume Press the [SRC] button for at least 1 second. Turn the [VOL] knob counterclockwise. Selecting the Source Attenuator Turning the volume down quickly. Press the [SRC] button. Press the [ATT] button. Source required Display Each time you press the button, the Atte
Resumen del contenido incluido en la página 8
General features System Q Adjustment Item Display Range 1,2 Subwoofer level* "SW L" –15 — +15 Selecting the best sound setting preset for 3 Bass level* "BAS L" –8 — +8 different types of music. 3 Middle level* "MID L" –8 — +8 3 Treble level* "TRE L" –8 — +8 1 Select the source to set Balance "BAL" Left 15 — Right 15 Press the [SRC] button. Fader "FAD" Rear 15 — Front 15 2 Select the Sound type Exit Audio Control mode (Volume control mode) Press the [Q] button. When you press the button once,
Resumen del contenido incluido en la página 9
Bass level Audio Setup Adjustment Item Display Range Setting the Sound system, such as Cross over Bass Center Frequency "BAS F" 40/50/60/70/80/100/ Network. 120/150 Hz Bass Q Factor "BAS Q" 1.00/1.25/1.50/2.00 1 Select the source to adjust Bass Extend "B EX" OFF/ON Press the [SRC] button. 2 Enter Audio Setup mode Middle level Press the [VOL] knob for at least 1 second. Adjustment Item Display Range Middle Center Frequency "MID F" 0.5/1.0/1.5/2.0 kHz 3 Select the Audio Setup item to adjust Midd
Resumen del contenido incluido en la página 10
General features Speaker Setting Switching Display Fine-tuning so that the System Q value is optimal Changing the information displayed. when setting the speaker type. Press the [DISP] button. Each time the button is pressed, the display 1 Enter Standby switches as shown below. Press the [SRC] button. Select the "STANDBY" display. In Tuner source 2 Enter Speaker Setting mode Information Display Frequency "FREQ" Press the [VOL] knob. Clock "CLOCK" 3 Select the Speaker type Turn the [VOL] knob. I
Resumen del contenido incluido en la página 11
Subwoofer Output TEL Mute Turning the Subwoofer output ON or OFF. The audio system automatically mutes when a call comes in. Push the Control knob towards [AM] for at least 2 seconds. When a call comes in Each time you push the knob, Subwoofer output "CALL" is displayed. switches ON and OFF. The audio system pauses. When it is ON, "SW ON" is displayed. Listening to the audio during a call Press the [SRC] button. • You can control this function when
Resumen del contenido incluido en la página 12
Tuner/TV control features Control knob AUTO/AME SRC 1-6 Band display Frequency display ST indicator Preset station number Tuning Tuning Mode Selecting the station. Choose the tuning mode. Press the [AUTO] button. 1 Select tuner source Each time you press the button, the Tuning Press the [SRC] button. mode alternates between the modes shown in Select the "TUNER" display. the table below. 2 Select the band Tuning mode Display Operation Push the Control knob towards [FM] or [AM]. Auto seek "AUTO
Resumen del contenido incluido en la página 13
Function of remote control Auto Memory Entry Direct Access Tuning Putting stations with good reception in the memory automatically. Entering the frequency and tuning. 1 Select the band for Auto Memory Entry 1 Select the band Push the Control knob towards [FM] or [AM]. Press the [FM] or [AM] button. 2 Enter Direct Access Tuning mode 2 Open Auto Memory Entry Press the [DIRECT] button on the remote Press the [AME] button for at least 2 seconds. control. "A-MEMORY" is displayed. "– – – –" is displa
Resumen del contenido incluido en la página 14
Tuner/TV control features Function of LX BUS Television Function of LX BUS Television TV Tuning Preset TV Tuning Selecting the TV channel of a connected LX BUS Recalling the TV channels in the memory. Television (optional accessory). 1 Select the TV band The action depends on the setting of the Push the Control knob towards [FM]. connected LX BUS Television. Refer to the user instruction of the LX BUS Television for details. 2 Recall the TV channel Press the desired [1] — [6] button. 1 Select
Resumen del contenido incluido en la página 15
CD/Audio file/External disc control features Control knob SRC SCAN RDM/ REP F.SEL M.RDM 3 Play time Track number Disc number IN indicator Playing CD & Audio file Playing External Disc Playing discs set in the optional accessory disc When a disc is inserted player connected to this unit. Press the [SRC] button. Press the [SRC] button. Select the "CD" display. Select the display for the disc player you want. Display examples: • When a CD is inserted, the "IN" indicator is ON. Display Disc player
Resumen del contenido incluido en la página 16
CD/Audio file/External disc control features Function of disc changers with remote control Fast Forwarding and Reversing Direct Disc Search Fast Forwarding Doing Disc Search by entering the disc number. Hold down towards [¢] with the Control knob. 1 Enter the disc number Release your finger to play the disc at that point. Press the number buttons on the remote control. Reversing Hold down towards [4] with the Control 2 Do Disc Search knob. Press the [+] or [–] button. Release your finger to p
Resumen del contenido incluido en la página 17
Function of Audio file Scan Play Folder Select Playing the first part of each song on the disc or Audio file folder you are listening to and Quickly selecting the folder you want to hear. searching for the song you want to hear. 1 Enter Folder Select mode 1 Start Scan Play Press the [F.SEL] button. Press the [SCAN] button. "FOLD SEL" is displayed. "TRAC SCN"/"FILE SCN"/"SCAN ON" is displayed. During Select mode the folder information is displayed as shown below. 2 Release it when the song you
Resumen del contenido incluido en la página 18
CD/Audio file/External disc control features Text/Title Scroll Scrolling the displayed CD text, Audio file text, or MD title. Push the Control knob towards [FM] for at least 2 seconds. • When the (page 21) is set to OFF, the display may black out while scrolling. | 18 English
Resumen del contenido incluido en la página 19
Menu system Control knob MENU SRC Menu display You can continue by returning to step 2 and Menu System setting other items. Setting beep sound during operation, etc. 4 Exit Menu mode functions. Press the [MENU] button. The Menu system basic operation method is explained here. The reference for the Menu items and their setting content is after this operation • When other items those applicable to the basic explanation. operation method above are displayed, their setting content chart is en
Resumen del contenido incluido en la página 20
Menu system In Standby mode Resetting the Security Code function when the audio unit is first used after removed Activating Security Code from the battery power source or the Reset Activating the Security Code disables the usage button is pressed of audio unit by someone else. Once the Security 1 Turn the power ON. Code is activated, the entry of authorized Security 2 Do the step 4 through 7 operation, and enter Code is required to turn on the audio unit when the Security Code. it is rem
