Resumen del contenido incluido en la página 1
Parrot MKi9200
User guide
1
Resumen del contenido incluido en la página 2
Contents Contents .................................................................................................................... 2 Installation ................................................................................................................. 4 Before you begin ..................................................................................................................................... 4 Checking the car configuration ..........................................
Resumen del contenido incluido en la página 3
Commands ............................................................................................................................................ 29 Settings .................................................................................................................................................. 30 Covers display ............................................................................................................................. 30 Modifying audio settings ................
Resumen del contenido incluido en la página 4
Installation WARNING: We advise our customers to have the Parrot MKi9200 fitted by a professional. Before you begin Checking the car configuration The cables supplied with the kit feature ISO connectors and two pairs of line-out jacks. The line-out jacks can be used if your audio system features this option (use of an amplifier). Several set-ups are therefore possible depending on the type of car stereo and your vehicle. If your car stereo is not fitted with ISO con
Resumen del contenido incluido en la página 5
Installing the kit Note : If you have the possibility to use a multimeter, test and verify all connections on the vehicle before connecting the Parrot MKi9200 wiring loom. Car stereo with ISO connectors 1. Connect the male connectors of the hands-free kit to the car stereo. 2. Join the vehicle‟s audio and power supply cables to the female connectors of the Parrot MKi9200. 3. On the installation cable, connect the free yellow wire to one of the audio system‟s corresponding m
Resumen del contenido incluido en la página 6
Car stereo with line-in Use this type of connection by wiring the line-out (brown & white wire or red & black wire) to your car stereo‟s line-in. Using the two pairs of line-out will enable you to take advantage of the music function in stereo over your vehicle‟s speakers. On the installation cable, connect the free yellow wire to the corresponding audio system‟s mute-input if available (mute in 1, mute in 2 or mute in 3). Installing the electronic box Avoid insta
Resumen del contenido incluido en la página 7
Installing the kit‟s power cable Note : In order to check the wiring, connect the screen before placing it on the dashboard. ► Refer to the Checking the wiring section for more information. Refer to your car stereo‟s wiring diagram. The red wire of the kit‟s cable must correspond to the constant +12V supply, the orange wire to the ignition +12V and the black wire to ground. Check that the orange wire is not connected to the constant +12V supply, as you could run down the vehicl
Resumen del contenido incluido en la página 8
Installing the individual components Installing the double microphone Selecting a In order to get hi-quality conversations, we advise you to respect the following recommendations: location Make sure the microphone is installed as close to the mouth of the user as possible. The ideal distance is 60 cm. The best possible location for the microphone is near the rear-view mirror. The microphone needs to be pointed towards the user. D < 60 cm α < 45° 8
Resumen del contenido incluido en la página 9
Make sure the microphone is not exposed to the air stream from air vents. Do not install the microphone cable in heating, ventilation or air conditioning systems. Be careful of the side airbags and SRS systems while running the microphone cable. Mounting the The mounting location for the microphone must be clean and free from double microphone grease or dust. Prior to installation, clean the area with an appropriate cleansing product. Once you have stuck the supp
Resumen del contenido incluido en la página 10
Installing the remote If you want to place the remote control on the dashboard, stick the double- sided tape located on the flat side of the bracket to fix it against the control on the dashboard. You can then insert the remote onto the bracket. dashboard WARNING: Once you have stuck the support on the dashboard, wait for approximately 2 hours to make sure the adhesive tape adheres well. Replacing the The remote control only works with a 3V CR2032 battery. battery Make sure
Resumen del contenido incluido en la página 11
Avoiding theft Remember to remove your screen when leaving the vehicle to avoid tempting any would- and sunlight be thieves and to prevent prolonged exposure to sunlight. exposure 11
Resumen del contenido incluido en la página 12
Getting started WARNING : If the remote control doesn’t seem to be associated to the electronic box while using the Parrot MKi for the first time, refer to the Associating the remote control to the electronic box section. Navigating through the menus Associating the remote control to the electronic box If the remote control doesn‟t seem to be associated to the electronic box while using the Parrot MKi for the first time, press several times the button while holding down
Resumen del contenido incluido en la página 13
Using the vocal menus Activating / You can activate or deactivate the vocal menus of the Parrot deactivating the MKi9200. To do so: vocal menus 1. Press the jog wheel and select Settings > Audio > Spoken menus. 2. Press the jog wheel to activate or deactivate this option. Adjusting the vocal 1. Press the jog wheel and select Settings > Audio > Menu menus volume Volume. 2. Use the jog wheel to adjust the volume and confirm. Establishing a Bluetooth connection with a phone
Resumen del contenido incluido en la página 14
connection vehicle if your screen is plugged in. Managing Bluetooth devices Disconnecting a 1. Press the jog wheel and select Settings > Bluetooth > Paired phone devices. 2. Select the phone you want to disconnect from the kit. 3. Select Disconnect. Connecting an The Parrot MKi9200 automatically connects itself to the last phone you already used used with it. If you want to connect the Parrot MKi9200 to another phone phone you already paired: 1. Press the jog wheel and select Set
Resumen del contenido incluido en la página 15
Synchronizing the phonebook Note : Only contacts stored in the memory of the phone will be synchronised in the kit’s memory. Automatic With most of the Bluetooth phones, the phonebook is automatically synchronized synchronisation in the kit‟s memory. Refer to the compatibility section of our website for more information. WARNING : The automatic synchronization is limited to 2 000 contacts for each paired phone. Sending If your phone doesn‟t support automatic synchronization,
Resumen del contenido incluido en la página 16
Display parameters Modifying the display parameters Adjusting the You can adapt the screen brightness of the Parrot MKi9200. To do so : 1. Press the jog wheel and select Settings > Display > Brightness. brightness 2. Select Night mode or Day mode. Note : You can also adjust the brightness parameter by holding down the jog wheel for 2 seconds. Changing the display 1. Press the jog wheel and select Settings > Display > Theme. color 2. Select the color using the jog whee
Resumen del contenido incluido en la página 17
Deleting a wallpaper To delete a picture sent to the Parrot MKi9200 as wallpaper, press the jog wheel and select Settings > Display > Wallpaper > Custom > Delete. 17
Resumen del contenido incluido en la página 18
Phone Note : The availability of some functionality only depends on the model of your mobile phone. Before using your Parrot MKi9200 telephone function, you first have to connect it with your phone / PDA. ► For more information,refer to the Establishing a Bluetooth connection with a phone section. Making and receiving calls The network signal at the top of the screen shows wether you are in range of the cellular network and can make and receive calls. The more bars, the str
Resumen del contenido incluido en la página 19
Receiving a call An incoming call is indicated by a ringtone. The name of the caller is announced if their details are stored in the phonebook of the phone connected to the Parrot MKi9200. Note : You can also associate a picture to a contact. This picture will be displayed each time you receive a call from this contact. Refer to the Assigning a picture to a contact section for more information. Answering a call Press the button to answer an incoming call. Declining a call
Resumen del contenido incluido en la página 20
Managing voice mail During a call, the Parrot MKi9200 allows you to send DTMFs to manage your voice mail for example. To do so : 1. Press the jog wheel to access the DTMF menu. > « 0 » is displayed by the kit. 2. Use the jog wheel to select your DTMF between the following possibilities : 0,1,2,3,4,5,6,7,8,9,# or *. 3. Press the jog wheel to send this DTMF to your phone. Ending a call Press the button to end a call. 20
