Manual de instrucciones de Metra Electronics 99-7340B

Resumen del contenido incluido en la página 1

INSTALLATION INSTRUCTIONS FOR PART 99-7340B
APPLICATIONS
2011 KIA SORENTO
99-7340B
KIT FEATURES
• DIN Head unit provisions with pocket
• ISO DIN Head unit provision with pocket
• Painted Matte Black to Match Factory
KIT COMPONENTS
• A) Radio Housing • B) ISO Brackets • C) ISO Trim Plate
A B C
WIRING & ANTENNA CONNECTIONS (Sold Separately)
• 70-7303 2009-Up Kia/Hyundai Harness
• 40-KI11 2007-Up Kia Antenna Adapter
TOOLS REQUIRED
• Panel Removal Tool • Phillips Screwdriver • Socket Wrench
METR

Resumen del contenido incluido en la página 2

INSTALLATION INSTRUCTIONS FOR PART 99-7340B TABLE OF CONTENTS DASH DISASSEMBLY • 2011 KIA SORENTO . . . . . . . . . . . . . . . . . . . . . . 1-2 KIT ASSEMBLY 2011 KIA SORENTO • DIN HEAD UNIT PROVISION . . . . . . . . . . . . . . . . . . 3 • ISO DIN HEAD UNIT PROVISION . . . . . . . . . . . . . . . 4 CAUTION: Metra recommends disconnecting the negative battery terminal before beginning any installation. All accessories, switches, and especially air bag indicator lights must be pl

Resumen del contenido incluido en la página 3

99-7340B DASH DISASSEMBLY 2011 KIA SORENTO Remove Shifter knob. (Fig. A) 1 A 2 Remove the shifter surround panel. (Fig. B) 3 Remove panel under the heater & A/C controls. (Fig. C) B C Continued on Pg. 2 ....................... 1

Resumen del contenido incluido en la página 4

99-7340B DASH DISASSEMBLY 2011 KIA SORENTO 4 Remove (2) Phillips screws from D bottom and remove center fascia panel. (Fig. D) Remove (4) Phillips screws securing 5 the heater & A/C controls. (Fig. E) 6 Remove (4) Phillips screws securing E the radio. (Fig. F) F Continue to kit assembly............... 2

Resumen del contenido incluido en la página 5

99-7340B KIT ASSEMBLY DIN HEAD UNIT PROVISION 1 Slide the DIN cage into the Radio A Housing and secure by bending the metal locking tabs down. (Fig. A) Snap the pocket into the bottom 2 opening of the radio housing. (Fig. B) 3 Slide the aftermarket head unit into B the cage and secure. (Fig. B) Locate the factory wiring harness 4 and antenna plug in the dash. Metra recommends using the proper mating adapters from Metra and/or AXXESS. 5 Reassemble dash in reverse order of disassemb

Resumen del contenido incluido en la página 6

99-7340B KIT ASSEMBLY ISO DIN HEAD UNIT PROVISION 1 Mount the ISO Brackets to the head A unit with the screws supplied with the unit. (Fig. A) Slide the head unit into the radio 2 opening until the side clips engage. (Fig. B) 3 Snap the Trim plate into the Radio B Housing. (Fig. B) Locate the factory wiring harness 4 and antenna plug in the dash. Metra recommends using the proper mating adapters from Metra and/or AXXESS. 5 Reassemble dash in reverse order of disassembly. 4

Resumen del contenido incluido en la página 7

INSTALLATION INSTRUCTIONS FOR PART 99-7340B NOTES

Resumen del contenido incluido en la página 8

INSTALLATION INSTRUCTIONS FOR PART 99-7340B METRA. THE WORLD’S BEST KITS.™ 1-800-221-0932 metraonline.com © COPYRIGHT 2004-2010 METRA ELECTRONICS CORPORATION REV. 6/28/2010