Manual de instrucciones de Metra Electronics 99-7343

Resumen del contenido incluido en la página 1

INSTALLATION INSTRUCTIONS FOR PART 99-7343
APPLICATIONS
2011 Hyundai Sonata
(For models equipped without Nav and with auto climate controls)
99-7343
KIT FEATURES
• ISO DIN head unit provision with pocket
• DDIN head unit provisions
• P ainted black and silver to match factor y dash
KIT COMPONENTS
• A) Radio Housing • B) (2) A/C V ent T rim P anels
• C) DDIN Brackets • D) Display Brackets
• E) P ocket • F) (12) 1/2” Phillips screws
• G) (2) #8X1/4” P an Head screws
• H) (4) #

Resumen del contenido incluido en la página 2

99-7343 Table of Contents Dash Disassembly – Hyundai Sona ta 2011 3-4 Kit Assembly – Hyundai Sona ta 2011 5-6 – ISO DIN head unit provisions 7 – DOUBLE DIN head unit provisions 7 Caution Metra recommends disconnecting the negative battery terminal before beginning any installation. All accessories, switches, and especially air bag indicator lights must be plugged in before reconnecting the battery or cycling the ignition. *NOTE: Refer Also to the instructions included with the aft

Resumen del contenido incluido en la página 3

99-7343 Dash Disassembly 1. Unc lip and remove the 2 trim panels surrounding the shifter and pocket. (F igure A) 2. Remove (2) Phillips screws at the bottom left and right side of the radio trim panel. (F igure B) 3. Unc lip and remove the radio trim panel inc luding c lima te control and vents. (F igure C) 4. Remove (4) Phillips screws securing the radio. (F igure D) (Figure B) 5. Remove (4) Phillips screws securing the display then remove the fac

Resumen del contenido incluido en la página 4

99-7343 Dash Disassembly 6. Unc lip and remove the Hazard s witch 8. Remove (4) Phillips screws securing from the radio panel. (F igure E) the c lima te control to the radio panel. (F igure E) 7. Remove (2) Phillips screws securing the passenger air ba g light assembly . 9. Remove (8) Phillips screws securing (F igure E) the a/c vents then unc lip and remove them from the factor y panel. (F igure E) (Figure E) 4

Resumen del contenido incluido en la página 5

99-7343 Kit Assembly 1. Sna p the a/c vents into the a/c vent 3. Sna p the hazard s witch into the main trim panels. (F igure A) radio housing. (F igure C) 2. Attach the left and right a/c vent trim Continued on next page panels and the climate controls to the main radio housing panel using the provided (10) #8X1/2” Phillips screws and (2) #8X1/4” Pan head screws. (F igure B) (Figure A) (Figure C) NOTE: #8X1/4” Pan head screws must be installed in the

Resumen del contenido incluido en la página 6

99-7343 Kit Assembly 4. Attach the passenger air ba g light to the main radio housing using (2) #8X1/2” Phillips screws. (F igure A) 5. Attach the display brackets to the display and mount it back into the dash in the factor y loca tion. (F igure B) Continued on next page (Figure A) (Figure B) 6

Resumen del contenido incluido en la página 7

99-7343 ISO DIN head unit provisions 1. Loca te the factor y wiring harness in the dash. Metra recommends using the proper ma ting ada pter from Metra or AXXESS. Re-connect the nega tive ba tter y terminal and test the unit for proper opera tion. 2. Attach the DDIN brackets to the aftermarket radio using the screws supplied with the radio, then secure the assembly to the pocket using the (4) supplied #8 T russ head screws. (F igure A) 3. Mount t

Resumen del contenido incluido en la página 8

INSTALLATION INSTRUCTIONS FOR PART 99-7343 METRA. THE WORLD’S BEST KITS.™ metraonline.com 1-800-221-0932 © COPYRIGHT 2004-2011 METRA ELECTRONICS CORPORATION REV. 3/16/11