Manual de instrucciones de Kenwood KDC-BT51U

Resumen del contenido incluido en la página 1

KDC-BT51U
KDC-5751SD
KDC-5051U
CD-RECEIVER
INSTRUCTION MANUAL
Before reading this manual, click the button below to check the latest edition and the
modified pages.
© 2010 Kenwood Corporation All Rights Reserved. IM327_Ref_E_en_01

Resumen del contenido incluido en la página 2

Contents Before use 4 General operation 28 Adjusting the Clock Component names 6 Adjusting the Date Dual clock display Function setting 6 Clock & Date display type setting Function setting operation Auxiliary input display setting Muting the audio upon reception of phone call Audio adjustments 7 Initial setting Audio control Demonstration mode Setting Audio preset Memory Audio preset recall Operation of hands-free phoning 34 Before use iPod control operation 9 Registering cell-phone Music search

Resumen del contenido incluido en la página 3

English | 3

Resumen del contenido incluido en la página 4

Before use Before using this unit for the first time About discs used with this unit This unit is initially set on the Demonstration mode. • This unit can only play the CDs with . When using this unit for the first time, cancel the • The following discs cannot be used: Demonstration mode. Refer to (page 4) of Quick start guide. - Discs with coloring on the recording surface or discs that are dirty 2 WARNING - Recordable/Rewritable disc tha

Resumen del contenido incluido en la página 5

English | 5

Resumen del contenido incluido en la página 6

Component names Function setting 1 234 5 6 Function setting operation Preferences of this unit can be set in the Function setting mode. For detailed setting procedure and items, refer to the explanation for each source function. 1 Select the source Press the [SRC] button. w q p 9 8 7 Switch to the source to display the items to set. 1 [ ] button 2 Enter Function setting mode Press the Control knob for at least 1 second. 2 Release button 3 Select the Function item 3 [SRC] button Turn the Cont

Resumen del contenido incluido en la página 7

Audio adjustments Audio control ⁄ • You can set Bass, Middle, and Treble for each source. You can adjust following Audio Control items; About Supreme Display Audio item Range Technology to extrapolate and supplement with proprietary algorithm, the high-frequency range that is cut off when “SubWoofer Level” Subwoofer level –15 — +15 (dB) encoding at low bit rate (less than 128Kbps, Sampling “Bass Boost” Bass Boost Level1/Level2/OFF frequency is 44.1kHz). “System Q” Preset Equalizer “Rock”/

Resumen del contenido incluido en la página 8

Audio adjustments Audio preset Memory Audio preset recall Registering the value setup by Audio Control. Recalling the sound setup registered by

Resumen del contenido incluido en la página 9

iPod control operation For basic operation to playback iPod contents, refer Alphabet search to the Quick Start Guide. You can select an alphabetic character from the list in the browse item (artist, album, etc.) currently selected. Music search 1 Enter Music search mode Press the [ ] button twice. Searching for the song you want to play. “MUSICSEARCH” is displayed. 1 Enter Music search mode 2 Select Alphabet search mode Press the [ ] button. Turn the Control knob to select “Alphabet “MUSIC

Resumen del contenido incluido en la página 10

iPod control operation Related search Direct search Browsing for music of the same artist or genre as Searching for music by selecting a browse item and the one being played. an alphabetic character(s). 1 Enter Search select mode 1 Enter Search select mode Press the [ ] button for at least 1 second. Press the [ ] button for at least 1 second. 2 Select Related search mode 2 Select Direct search mode Turn the Control knob to select “Related Turn the Control knob to select “Direct Search”, Sear

Resumen del contenido incluido en la página 11

Skip search Skip search ratio setting The number of songs to be skipped is determined Sets the ratio of skip performed with by the ratio of the total number of songs in the list (page 11). which is selected. 1 Select iPod source 1 Enter Music search mode Press the [SRC] button. Press the [ ] button. Select the “iPod” display. “MUSICSEARCH” is displayed. 2 Enter Function setting mode 2 Enter Search select mode Press the Control knob for at least 1 second. Press the [ ] button. 3

Resumen del contenido incluido en la página 12

iPod control operation Play mode Registering a song in the playlist You can select a Play Mode, such as Random play You can register your favorite songs to make a and Repeat play. playlist. You can register up to ten songs in the playlist. 1 Select iPod source Press the [SRC] button. 1 Play the song you want to register Select the “iPod” display. Push the Control knob towards up, down, right, and left. 2 Enter Function setting mode Press the Control knob for at least 1 second. 2 Enter Search

Resumen del contenido incluido en la página 13

Playing the playlist Deleting a song from the playlist 1 Enter Search select mode 1 Enter Search select mode Press the [ ] button for at least 1 second. Press the [ ] button for at least 1 second. 2 Select Recall playlist mode 2 Select Delete playlist mode Turn the Control knob to select “Recall My Turn the Control knob to select “Delete My Playlist”, and then press the Control knob. Playlist”, and then press the Control knob. 3 Play a song in the playlist 3 Select how to delete song(s) Turn

Resumen del contenido incluido en la página 14

Music disc/Audio file (CD, USB, or SD) Operation For basic operation to playback Music disc/Audio Music Editor media file contents, refer to the Quick Start Guide. Skip search The number of songs to be skipped is determined by the ratio of the total number of songs in the list which is selected. Music search 1 Enter Music search mode Selecting the music you want to listen to from the Press the [ ] button. device or media being played now. “MUSICSEARCH” is displayed. 1 Enter Music search mode

Resumen del contenido incluido en la página 15

Function of disc changers with KDC-5751SD/ Play mode KDC-5051U You can select a Play Mode, such as Random play Basic operation of Disc changer and Repeat play. (Optional) 1 Select CD/ USB/ SD source Selecting CD changer source Press the [SRC] button. Press the [SRC] button. Select the “CD”, “USB”, or “SD” display. Select the “CD CH” display. 2 Enter Function setting mode Music search Press the Control knob for at least 1 second. Push the Control knob towards right or left. 3 Select the Play f

Resumen del contenido incluido en la página 16

Tuner Operation For basic operation to listen to the radio, refer to the Seek mode setting Quick Start Guide. Selects the tuning mode of the radio. 1 Select Tuner source Press the [SRC] button. Auto memory Select the “TUNER” display. Memorizes 18 (FM)/ 6 (AM) stations with good 2 Enter Function setting mode reception automatically. Press the Control knob for at least 1 second. 1 Select Tuner source 3 Select the Seek mode Press the [SRC] button. The item can be selected and determined as Selec

Resumen del contenido incluido en la página 17

6 Exit Function setting mode Tuner setting Press the [ ] button for at least 1 second. Sets the tuner items. 1 Select Tuner source Press the [SRC] button. Select the “TUNER” display. 2 Enter Function setting mode Press the Control knob for at least 1 second. 3 Select the Setting mode Turn the Control knob to select “Settings”, and then press the Control knob. 4 Select the desired Tuner setting item Turn the Control knob to select Tuner setting item, and then press the Control knob. Display Ov

Resumen del contenido incluido en la página 18

Tuner Operation PTY (Program Type) Program Type preset Selecting the Program Type below and searching Putting the Program Type in the Preset button for a station; memory and quick recall. Program Type Display Program Type Display Presetting the Program Type Speech “Speech” Serious Classical “Classics” 1 Select the Program Type to preset Music “Music” Other Music “Other M” Refer to (page 18). News “News” Weather “Weather” Current Affairs “Affairs” Finance “Finance” 2 Enter P

Resumen del contenido incluido en la página 19

Changing Language for PTY Function Selecting the Program Type display language as follows; Language Display English “English” French “French” German “German” 1 Enter PTY mode Press the [ ] button twice. 2 Enter Changing Language mode Press the Control knob. 3 Select the language Turn the Control knob to select language, and then press the Control knob. English | 19

Resumen del contenido incluido en la página 20

Log memory Log memory recall Log memory item lock This unit automatically memorizes the previously Locks Log memory items to avoid them being used functions and Function setting items, which deleted. can easily be recalled. 1 Display the Log memory list 1 Display the Log memory list Press the [LOG] button. Press the [LOG] button. 2 Lock the Log memory item 2 Recall the desired function Turn the Control knob to select item, and then Turn the Control knob to select function, and press the Contro