Resumen del contenido incluido en la página 1
KDC-4020(M)Cover 01.11.29 10:32 AM Page 1
CD-RECEIVER
KDC-4020
INSTRUCTION MANUAL
KDC-3020
KDC-2020
KDC-1020
KDC-1020S
© B64-2115-00 (MWN/IW)
Resumen del contenido incluido en la página 2
KDC-4020_U.S 01.11.29 10:28 AM Page 2 Contents Safety precautions......................3 CD/External disc control features ..................................11 About CDs...................................5 Playing CD General features .........................6 Playing External Disc Power Fast Forwarding and Reversing Selecting the Source Track Search Volume Album Search Attenuator Track/Album Repeat Loudness Track Scan System Q Random Play Audio Control Magazine Random Play Speaker Setti
Resumen del contenido incluido en la página 3
KDC-4020_U.S 01.11.29 10:28 AM Page 3 Safety precautions IMPORTANT INFORMATION 2WARNING 2CAUTION About the disc changer to be To prevent injury or fire, take the To prevent damage to the machine, connected: following precautions: take the following precautions: To connect a disc changer having the "O-N" • Insert the unit all the way in until it is fully • Make sure to ground the unit to a negative switch to this unit, set the "O-N" switch to "N". locked in place. Otherwise it may fall out of
Resumen del contenido incluido en la página 4
KDC-4020_U.S 01.11.29 10:28 AM Page 4 Cleaning the Faceplate Terminals Cleaning the CD Slot NOTE If the terminals on the unit or faceplate get As dust tends to accumulate in the CD slot, • If you experience problems during dirty, wipe them with a dry, soft cloth. clean it every once in a while. Your CDs can installation, consult your Kenwood dealer. get scratched if you put them in a dusty CD slot. • If the unit does not seem to be working Cleaning the Unit right, try pressing the reset butto
Resumen del contenido incluido en la página 5
KDC-4020_U.S 01.11.29 10:28 AM Page 5 About CDs Handling CDs CD cleaning • Don’t touch the recording surface of the CD. Clean from the center of the disc and move outward. Removing CDs When removing CDs from this unit pull them • CD-R and CD-RW are easier to damage than out horizontally. a normal music CD. Use a CD-R or a CD-RW after reading the caution items on the package etc. CDs that can’t be used • Don’t stick tape etc. on the CD. • CDs that aren’t round can’t be used. Also, don’t use a
Resumen del contenido incluido en la página 6
KDC-4020_U.S 01.11.29 10:28 AM Page 6 General features Power Release button (KDC-4020/KDC-3020/KDC-2020 only) AM FM Turning ON the Power ud 4 ¢ Press the [SRC] button. Turning OFF the Power Press the [SRC] button for at least 1 second. Selecting the Source Press the [SRC] button. Source required Display SRC ATT/ #1 #3 CLK/ Q/ Tuner "TUnE" LOUD ADJ AUD CD "CD" External disc "DISC" (Function of the KDC-4020/KDC-3020/KDC-2020) KDC-4020/KDC-3020/KDC-2020 Standby (Illumination only mode) "OFF" ATT
Resumen del contenido incluido en la página 7
KDC-4020_U.S 01.11.29 10:28 AM Page 7 Loudness Audio Control Compensating for low and high tones during low volume. 1 Select the source for adjustment Press the [LOUD] button for at least 1 second. Press the [SRC] button. Each time the button is pressed for at least 1 second the 2 Enter Audio Control mode Loudness turns ON or OFF. Press the [AUD] button for at least 1 second. When it’s ON, "LOUD" indicator is ON. 3 Select the Audio item for adjustment Press the [FM] or [AM] button. System Q E
Resumen del contenido incluido en la página 8
KDC-4020_U.S 01.11.29 10:28 AM Page 8 General features Press the [CLK] button. Speaker Setting 2 Enter clock adjustment mode Fine-tuning so that the System Q value is optimal when setting Press the [CLK] button for at least 2 seconds. the speaker type. The clock display blinks. 1 Enter Standby 3 Adjust the hours Press the [SRC] button. Press the [FM] or [AM] button. Select the "OFF" display. Adjust the minutes 2 Enter Speaker Setting mode Press the [4] or [¢] button. Press the [Q] button. 4 E
Resumen del contenido incluido en la página 9
KDC-4020_U.S 01.11.29 10:28 AM Page 9 Tuner features • The faceplate is a precision piece of equipment and can be damaged by shocks or jolts. For that reason, keep the faceplate in FM/ its special storage case while detached. AM CRSC • Do not expose the faceplate or its storage case to direct sunlight 4 ¢ or excessive heat or humidity. Also avoid places with too much dust or the possibility of water splashing. Reattaching the Faceplate 1 Align the projections on the unit with the grooves on t
Resumen del contenido incluido en la página 10
KDC-4020_U.S 01.11.29 10:28 AM Page 10 Tuner features Press the [FM] or [AM] button. Tuning Mode 2 Select the frequency to put in the memory Choose the tuning mode. Press the [4] or [¢] button. Press the [AUTO] button. 3 Put the frequency in the memory Each time the button is pressed the Tuning mode switches as Press the [#1] — [#6] button for at least 2 seconds. shown below. The preset number display blinks 1 time. Tuning mode Display Operation On each band, 1 station can be put in the memor
Resumen del contenido incluido en la página 11
KDC-4020_U.S 01.11.29 10:28 AM Page 11 CD/External disc control features Press the [CRSC] button for at least 1 second. Each time the button is pressed CRSC turns ON or OFF. DISC- DISC+ When it's ON, the "CRSC" indicator is ON. 0 4 ¢ Frequency Step Setting Changing the tuning frequency step. The original setting is FM band 50 kHz, and AM band 9 kHz. 1 Turn the power OFF Press the [SRC] button for at least 1 second. SRC SCAN REP M.RDM RDM 2 Switch the frequency step While pressing the [#1] and
Resumen del contenido incluido en la página 12
KDC-4020_U.S 01.11.29 10:28 AM Page 12 CD/External disc control features Reversing Playing CD Hold down on the [4] button. When a CD is inserted Release your finger to play the disc at that point. Press the [SRC] button. Select the "CD" display. Track Search When a CD is inserted, the "IN" indicator is ON. Selecting the song you want to hear. Eject the CD Press the [4] or [¢] button. Press the [0] button. 3 in. (8cm) CD cannot be played. Using an adapter and inserting them into this unit can
Resumen del contenido incluido en la página 13
KDC-4020_U.S 01.11.29 10:28 AM Page 13 Basic Operations of remote Accessory of the KDC-4020 Track Scan Playing the first part of each song on the disc you are listening to and searching for the song you want to listen to. 1 Start Track Scan Press the [SCAN] button. "SCN" indicator is ON. 2 Release it when the song you want to listen to is played Press the [SCAN] button. 4/¢ Random Play FM/AM/DISC 38 Playing all the songs on the disc in random order. Press the [RDM] button. Each time the butt
Resumen del contenido incluido en la página 14
KDC-4020_U.S 01.11.29 10:28 AM Page 14 Basic Operations of remote Accessory of the KDC-4020 Loading and Replacing the battery In Tuner source Use one lithium battery (CR2025). [FM]/ [AM] buttons Insert the batteries with the + and – poles aligned properly, Select the band. following the illustration inside the case. Each time the [FM] button is pressed it switches between the FM1, FM2, and FM3 bands. [4]/ [¢] buttons Tune up or down band. In Disc source 2WARNING [4]/ [¢] buttons Store unused
Resumen del contenido incluido en la página 15
KDC-4020_U.S 01.11.29 10:28 AM Page 15 Accessories External view External view 2WARNING ......... Number of items ......... Number of items If you connect the ignition wire (red) and the battery wire (yellow) to the car chassis (ground), you may cause a short circuit, that in turn may start a fire. Always connect those wires to the power 1 3 .........4 source running through the fuse box. .........1 2CAUTION • If your car's ignition does not have an ACC position, connect the .........2 4 ....
Resumen del contenido incluido en la página 16
KDC-4020_U.S 01.11.29 10:28 AM Page 16 Connecting Wires to Terminals Front left output (White) (KDC-4020 only) 26 Front right output (Red) (KDC-4020 only) 27 Rear left output (White) 23 2 KENWOOD disc changer control input (KDC-4020/3020/2020 only) Rear right output (Red) 28 To connect the Disc changer, consult your REAR L Disc changer manual. 3 FM/AM antenna input 1 Fuse (10A) 24 R If no connections are made, do not let the wire come out from the tab.4 Wiring harness (Accessory1)25 5 When us
Resumen del contenido incluido en la página 17
KDC-4020_U.S 01.11.29 10:28 AM Page 17 Installation ■ Installation ■ Installing in Japanese-Made Cars 1 Refer to the section "Removing the hard rubber frame" (page 18) Firewall or metal support and then remove the hard rubber frame. 2 Align the holes in the unit (two locations on each side) with the Screw (M4X8) (commercially vehicle mounting bracket and secure the unit with the accessory available) screws. N T 8 mm 8mm MAX. MAX. N T/N T 3 4 ø5mm ø5mm Bend the tabs of the T: Toyota cars mou
Resumen del contenido incluido en la página 18
KDC-4020_U.S 01.11.29 10:28 AM Page 18 Installation ■ Removing the hard rubber frame ■ Removing the Unit 1 Refer to the section “Removing the hard rubber frame” and then 1 Engage the catch pins on the removal tool and remove the two remove the hard rubber frame. locks on the lower level. Lower the frame and pull it forward as shown in the figure. 2 Remove the screw (M4 × 8) on the back panel. 3 Insert the two removal tools deeply into the slots on each side, as shown. Catch Lock Accessory2 Sc
Resumen del contenido incluido en la página 19
KDC-4020_U.S 01.11.29 10:28 AM Page 19 Troubleshooting Guide What might seem to be a malfunction in your unit may ? The sound quality is poor or distorted.25 ✔ One of the speaker wires is being pinched by a screw in the car. just be the result of slight misoperation or miswiring. ☞ Check the speaker wiring. Before calling service, first check the following table for possible problems. ✔ The speakers are not wired correctly.27 ☞ Reconnect the speaker wires so that each output terminal is conn
Resumen del contenido incluido en la página 20
KDC-4020_U.S 01.11.29 10:28 AM Page 20 Troubleshooting Guide Disc source ? Can’t remove disc.64 ✔ The cause is that more than 10 minutes has elapsed since the vehicle ? "AVin" is displayed without achieving External disc control mode.50 ACC switch was turned OFF. ✔ O-N switch is set to "O" side. ☞ The disc can only be removed within 10 minutes of the ACC ☞ Set the switch to "N" side. switch being turned OFF. If more than 10 minutes has elapsed, ✔ Unsupported disc changer is connected.51 t
