Resumen del contenido incluido en la página 1
KDC-2021S_U.S 01.10.10 2:31 PM Page 1
CD-RECEIVER
KDC-2021S
INSTRUCTION MANUAL
CD RECEIVER
GEBRUIKSAANWIJZING
REPRODUCTOR DE DISCOS COMPACTOS RECEPTOR DE FM/AM
MANUAL DE INSTRUCCIONES
CD-RECEIVER
BRUKSANVISNING
CD-VASTAANOTTIMEN
KÄYTTÖOHJE
© B64-2232-00 (EY)
Resumen del contenido incluido en la página 2
KDC-2021S_U.S 01.10.10 2:31 PM Page 2 Contents Safety precautions......................3 CD player features....................11 Playing CD About CDs...................................5 Fast Forwarding and Reversing General features .........................6 Track Search Power Track Repeat Selecting the Source Track Scan Volume Random Play Attenuator Accessories...............................13 Loudness System Q Installation Procedure ..............13 Audio Control Connecting Wires to Term
Resumen del contenido incluido en la página 3
KDC-2021S_U.S 01.10.10 2:31 PM Page 3 Safety precautions Do Not Load 8-cm (3-in.) CDs in the CD 2WARNING 2CAUTION slot To prevent injury and/or fire, take the To prevent damage to the machine, If you try to load an 8-cm CD with its adapter into the unit, the adapter might separate from following precautions: take the following precautions: the CD and damage the unit. • Insert the unit all the way until it is fully • Make sure to ground the unit to a negative locked in place. Otherwise it may
Resumen del contenido incluido en la página 4
KDC-2021S_U.S 01.10.10 2:31 PM Page 4 Safety precautions Cleaning the Faceplate Terminals The marking of products using lasers NOTE If the terminals on the unit or faceplate get (Except for some areas) • If you experience problems during dirty, wipe them with a dry, soft cloth. installation, consult your Kenwood dealer. CLASS 1 • If the unit does not seem to be working Cleaning the Unit LASER PRODUCT right, try pressing the reset button first. If If the faceplate of this unit is stained, wip
Resumen del contenido incluido en la página 5
KDC-2021S_U.S 01.10.10 2:31 PM Page 5 About CDs Handling CDs CD cleaning • Don’t touch the recording surface of the CD. Clean from the center of the disc and move outward. Removing CDs When removing CDs from this unit pull them • CD-R and CD-RW are easier to damage than out horizontally. a normal music CD. Use a CD-R or a CD-RW after reading the caution items on the package etc. CDs that can’t be used • Don’t stick tape etc. on the CD. • CDs that aren’t round can’t be used. Also, don’t use a
Resumen del contenido incluido en la página 6
KDC-2021S_U.S 01.10.10 2:31 PM Page 6 General features Power Release button AM FM Turning ON the Power ud 4 ¢ Press the [SRC] button. Turning OFF the Power Press the [SRC] button for at least 1 second. Selecting the Source Press the [SRC] button. Source required Display SRC ATT/ #1 #3 CLK/ Q/ Tuner "TUnE" LOUD ADJ AUD CD "CD" Standby (Illumination only mode) "OFF" Volume Increasing Volume Press the [u] button. ATT indicator LOUD indicator Decreasing Volume Press the [d] button. Attenuator Tur
Resumen del contenido incluido en la página 7
KDC-2021S_U.S 01.10.10 2:31 PM Page 7 Loudness Audio Control Compensating for low and high tones during low volume. 1 Select the source for adjustment Press the [LOUD] button for at least 1 second. Press the [SRC] button. Each time the button is pressed for at least 1 second the 2 Enter Audio Control mode Loudness turns ON or OFF. Press the [AUD] button for at least 1 second. When it’s ON, "LOUD" indicator is ON. 3 Select the Audio item for adjustment Press the [FM] or [AM] button. Each time
Resumen del contenido incluido en la página 8
KDC-2021S_U.S 01.10.10 2:31 PM Page 8 General features 2 Enter clock adjustment mode Speaker Setting Press the [CLK] button for at least 2 seconds. Fine-tuning so that the System Q value is optimal when setting The clock display blinks. the speaker type. 3 Adjust the hours 1 Enter Standby Press the [FM] or [AM] button. Press the [SRC] button. Adjust the minutes Select the "OFF" display. Press the [4] or [¢] button. 2 Enter Speaker Setting mode 4 Exit clock adjustment mode Press the [Q] button
Resumen del contenido incluido en la página 9
KDC-2021S_U.S 01.10.10 2:31 PM Page 9 Tuner features its special storage case while detached. • Do not expose the faceplate or its storage case to direct sunlight FM/ or excessive heat or humidity. Also avoid places with too much AM MONO dust or the possibility of water splashing. 4 ¢ Reattaching the Faceplate 1 Align the projections on the unit with the grooves on the faceplate. SRC #1 - 6 AUTO/ AME 2 Push the faceplate in until it clicks. The faceplate is locked in place, allowing you to us
Resumen del contenido incluido en la página 10
KDC-2021S_U.S 01.10.10 2:31 PM Page 10 Tuner features Monaural Reception turns ON or OFF. Tuning Mode When it's ON, the Monaural indicator is ON. Choose the tuning mode. Press the [AUTO] button. Each time the button is pressed the Tuning mode switches as Station Preset Memory shown below. Putting the station in the memory. Tuning mode Display Operation Auto seek "AUTO 1" Automatic search for a station. 1 Select the band indicator Press the [FM] or [AM] button. Preset station "AUTO 2" Search i
Resumen del contenido incluido en la página 11
KDC-2021S_U.S 01.10.10 2:31 PM Page 11 CD player features 1 Select the band Press the [FM] or [AM] button. 2 Call up the station 0 4 ¢ Press the [#1] — [#6] button. SRC SCAN REP RDM Track number SCN indicator REP indicator Track time RDM indicator IN indicator — 11 —
Resumen del contenido incluido en la página 12
KDC-2021S_U.S 01.10.10 2:31 PM Page 12 CD player features Playing CD Track Repeat Replaying the song you're listening to. When a CD is inserted Press the [SRC] button. Press the [REP] button. Select the "CD" display. Each time the button is pressed the Track Repeat turns ON or OFF. When a CD is inserted, the "IN" indicator is ON. When it's ON, the "REP" indicator is ON. Eject the CD Press the [0] button. Track Scan 3 in. (8cm) CD cannot be played. Using an adapter and inserting Playing the f
Resumen del contenido incluido en la página 13
KDC-2021S_U.S 01.10.11 9:41 AM Page 13 Accessories 2CAUTION External view Number of items • If your car is not prepared for this special connection-system, consult your Kenwood dealer. • Only use antenna conversion adapters (ISO-JASO) when the 1 ..........................................1 antenna cord has an ISO plug. • Make sure that all wire connections are securely made by inserting jacks until they lock completely. • If your vehicle's ignition does not have an ACC position, or if the 2 ..
Resumen del contenido incluido en la página 14
KDC-2021S_U.S 01.10.11 9:41 AM Page 14 Connecting Wires to Terminals 10 Rear left output (White) Rear right output (Red)4 Antenna Conversion Adaptor (ISO–JASO) (Accessory3) 2 REAR L R Antenna Cord (ISO) 1 Fuse (10A) 13 FM/AM antenna input 3 Wiring harness (Accessory1) 16 Connector Function Guide Pin Numbers for Wire Color Functions 17 ISO Connectors TEL mute wire (Brown) Connect to the terminal that is grounded when either the External Power TEL MUTE telephone rings or during Connector conver
Resumen del contenido incluido en la página 15
KDC-2021S_U.S 01.10.10 2:31 PM Page 15 Installation ■ Installation 2WARNING Connecting the ISO Connector (see p.14) The pin arrangement for the ISO connectors depends on the type of vehicle you drive. Make sure to make the proper connections to Firewall or metal support prevent damage to the unit. The default connection for the wiring harness is described in 1 below. Screw (M4X8) If the ISO connector pins are set as described in 2 or 3, make the (commercially connection as illustrated. availa
Resumen del contenido incluido en la página 16
KDC-2021S_U.S 01.10.10 2:31 PM Page 16 Installation ■ Removing the hard rubber frame ■ Removing the Unit 1 Refer to the section “Removing the hard rubber frame” and then 1 Engage the catch pins on the removal tool and remove the two remove the hard rubber frame. locks on the lower level. Lower the frame and pull it forward as shown in the figure. 2 Remove the screw (M4×8) on the back panel. 3 Insert the two removal tools deeply into the slots on each side, as shown. Catch Lock Accessory2 Remo
Resumen del contenido incluido en la página 17
KDC-2021S_U.S 01.10.11 9:41 AM Page 17 Troubleshooting Guide What might seem to be a malfunction in your unit may ? Even if Loudness is turned ON, high-pitched tone isn't compensated for. 17 just be the result of slight misoperation or miswiring. ✔ Tuner source is selected. Before calling service, first check the following table ☞ High-pitched tone isn't compensated for when in Tuner source. for possible problems. ? No sound can be heard, or the volume is low. General ✔ The fader or balance s
Resumen del contenido incluido en la página 18
KDC-2021S_U.S 01.10.10 2:31 PM Page 18 Troubleshooting Guide Disc source ?Track Search can't be done.66-2 ✔ For the albums first or last song. ? The specified disc does not play, but another one plays instead.52 ☞ For each album, Track Search can't be done in the backward ✔ The specified CD is quite dirty. direction for the first song or in the forward direction for the last ☞ Clean the CD. song. ✔ The CD is upside-down.53 ☞ Load the CD with the labeled side up. The messages shown below displ
Resumen del contenido incluido en la página 19
KDC-2021S_U.S 01.10.10 2:31 PM Page 19 Specifications Specifications subject to change without notice. FM tuner section Audio section Frequency range (50 kHz space) ..............87.5 MHz – 108.0 MHz Maximum output power.................................................45 W x 4 Usable sensitivity (S/N = 26dB) .................................0.7 µV/75 Ω Output power (DIN 45324, +B=14.4V)...........................28 W x 4 Quieting Sensitivity (S/N = 46dB) ..............................1.6 µV/7
