Resumen del contenido incluido en la página 1
KDC-4016/2016(M)Cover 02.5.15 10:12 AM Page 1
CD-RECEIVER
KDC-4016
INSTRUCTION MANUAL
KDC-2016
COMPACT
DIGITAL AUDIO
©B64-1548-00 (MW)
Resumen del contenido incluido en la página 2
KDC-4016_U.Sr2 02.5.15 10:15 AM Page 2 Contents Before use Basic Operations of remote ................................15 Safety precautions ........................................................................3 Installation Handling Compact discs................................................................5 Accessories.................................................................................17 General features Installation Procedure................................................
Resumen del contenido incluido en la página 3
KDC-4016_U.Sr2 02.5.15 10:15 AM Page 3 Safety precautions IMPORTANT INFORMATION 2WARNING 2CAUTION You cannot connect the unit directly to the following CD automatic changers. If you want To prevent injury or fire, take the To prevent damage to the machine, to use older changers with the unit, follow following precautions: take the following precautions: the directions below according to the type of • Insert the unit all the way in until it is fully • Make sure to ground the unit to a negative
Resumen del contenido incluido en la página 4
KDC-4016_U.Sr2 02.5.15 10:15 AM Page 4 Safety precautions Cleaning the Faceplate Terminals Cleaning the CD Slot NOTE If the terminals on the unit or faceplate get As dust tends to accumulate in the CD slot, • If you experience problems during dirty, wipe them with a dry, soft cloth. clean it every once in a while. Your CDs can installation, consult your Kenwood dealer. get scratched if you put them in a dusty CD slot. • If the unit does not seem to be working right, Cleaning the Unit try pres
Resumen del contenido incluido en la página 5
KDC-4016_U.Sr2 02.5.15 10:16 AM Page 5 Handling Compact discs Playing a CD that is dirty, scratched Cleaning CDs Do Not Load CD Accessories or warped can cause the sound to If a CD has gotten dirty, wipe it off gently Do not use commercially available CD using a commercially available cleaning cloth accessories that can be loaded into the CD skip and the unit to operate or a soft cotton cloth, starting from the slot, such as stabilizers, protective sheets, or incorrectly, resulting in worsen
Resumen del contenido incluido en la página 6
KDC-4016_U.Sr2 02.5.15 10:16 AM Page 6 General features Power SRC/ Turning on the power: PWR OFF Press the SRC (source) button. ¢ u FM NOTE Turn the power on before carrying out the following procedures. SRC PWR Turning off the power: OFF CRSC Press the PWR OFF button for at least one second. DISC A.ADJ DISC LOUD SCAN RDM REP D.SCN M.RDM AUTO CLK AME ADJ Switching Modes d ATT/ #1-5 4 AUD/ Switching Modes: LOUD A.ADJ Each time you press the SRC (source) button, the mode AM switches as f
Resumen del contenido incluido en la página 7
KDC-4016_U.Sr2 02.5.15 10:16 AM Page 7 switching adapter (KCA-S210A or CA-C1AX) or CD changer Press the LOUD button for at least one second to switch the (KDC-CPS85, KDC-CX85, KDC-CPS82 or KDC-CX82) is loudness on and off. connected to this unit. During the AUX mode, "AVin" will show in the display. When the CA-C1AX is being used, the AUX Mode will replace the External Disc Control Mode. Audio Control Setting Adjust various parameters of sound quality. 1 Press the A.ADJ button for at least on
Resumen del contenido incluido en la página 8
KDC-4016_U.Sr2 02.5.15 10:16 AM Page 8 General features Clock display "TRE": Adjust the treble level. Setting values: - 8 - + 8 Turning clock display On/Off: Each time you press the CLK button, the display switches between the clock and each mode display. "BL": Adjust the balance level. Setting values: Left 15 - Right 15 Adjusting Time Adjust the time. 1 When the time is not displayed, first press the CLK button to display the time. "FD": Adjust the fader level. 2 Press the CLK button for a
Resumen del contenido incluido en la página 9
KDC-4016_U.Sr2 02.5.15 10:16 AM Page 9 Tuner features Removing the Faceplate: Press the release button. FM/ The faceplate is unlocked, allowing you to detach it. SRC CRSC NOTE ¢ • The faceplate is a precision piece of equipment and can be damaged by shocks or jolts. For that reason, keep the faceplate in its special storage case while detached. SRC PWR OFF CRSC DISC A.ADJ DISC LOUD SCAN RDM REP D.SCN M.RDM AUTO CLK AME ADJ • Do not expose the faceplate or its storage case to direct su
Resumen del contenido incluido en la página 10
KDC-4016_U.Sr2 02.5.15 10:16 AM Page 10 Tuner features Recalling a Preset Station: Tuning Press the preset station button (#1-6) for the desired station. You can choose between auto seek tuning of receivable The number of the recalled station is displayed. frequencies and manual tuning. NOTE 1 Press the SRC (source) button repeatedly to select the tuner You can store six stations in each of the FM1, FM2, FM3, and AM mode. "TUnE" is displayed when the tuner mode has been bands. selected. 2 Pre
Resumen del contenido incluido en la página 11
KDC-4016_U.Sr2 02.5.15 10:16 AM Page 11 CD/External disc control features NOTE When you change the frequency step settings, all memory contents will be erased. DISC + ¢ Returning Frequency Step Settings to Original Values: 0 SRC Repeat steps 1 and 2 above. SRC PWR OFF CRSC DISC A.ADJ Clean Reception System Circuit (CRSC) DISC LOUD SCAN RDM REP D.SCN M.RDM AUTO CLK Temporarily have reception switched from stereo to mono to AME ADJ reduce multi-path noise when listening to the FM station.
Resumen del contenido incluido en la página 12
KDC-4016_U.Sr2 02.5.15 10:16 AM Page 12 CD/External disc control features that is connected. Playing CDs Mode Display Examples • "CD2"...when a CD player is connected Playing CDs: • "DISC"...when a disc changer is connected If no CDs are inserted, insert one in the slot with the label • "DISC-1", "DISC-2"...when two disc changers are connected facing up. If a CD is already inserted, press the SRC button repeatedly to NOTE select the CD mode. • When one disc has finished playing its last track
Resumen del contenido incluido en la página 13
KDC-4016_U.Sr2 02.5.15 10:16 AM Page 13 Press the 4 button to display the desired track number. Track / Disc Repeat Press once to search back to the beginning of the current track, Repeat playing the track or the disc currently being listened to. twice to search back to the beginning of the previous track, and so forth. Turning Repeat Play On/Off: Play starts at the beginning of the displayed track number. Press the REP button to switch repeat track/disc play on and NOTE off as follows: (For
Resumen del contenido incluido en la página 14
KDC-4016_U.Sr2 02.5.15 10:16 AM Page 14 CD/External disc control features Function of the KDC-4016 NOTE Disc Scan (Function of disc changers) Random play is canceled when you eject the disc. Successively play the beginning of each disc on a changer until you find the one that you want to listen to. Starting the disc scan: Press the D.SCN button. The SCN indicator lights up and the Function of the KDC-4016 first 10 seconds of each disc will be played, in the order they Magazine Random Play (Fu
Resumen del contenido incluido en la página 15
A T T KDC-4016_U.Sr2 02.5.15 10:16 AM Page 15 Basic Operations of remote Function of the KDC-4016 NOTE The supplied remote control unit is in its storage case. 2CAUTION Do not set the remote on hot places such as above the dashboard. Loading and Replacing the Batteries: + Use two “AAA”-size batteries. SRC + SRC Slide the cover while pressing downwards to remove it as – - illustrated. TUNE –/4/TRACK – 4 Insert the batteries with the + and – poles aligned properly, FM/DISC + ¢ TUNE TUNE +/¢/TRA
Resumen del contenido incluido en la página 16
KDC-4016_U.Sr2 02.5.15 10:16 AM Page 16 Basic Operations of remote Function of the KDC-4016 Basic operations Tuner features • VOLUME buttons • 4/¢ (TUNE) buttons Press the + button to turn the volume up. Press the 4 button to decrease the frequency. Press the – button to turn the volume down. Press the ¢ button to increase the frequency. • SRC button • AM/FM button Each time you press the SRC button, the mode switches as Press the AM button to select the AM band. follows: Press the FM button
Resumen del contenido incluido en la página 17
KDC-4016_U.Sr2 02.5.15 10:16 AM Page 17 Accessories Installation Procedure 1. To prevent a short circuit, remove the key from the ignition and External view Number of items disconnect the - battery. 2. Make the proper input and output wire connections for each unit. 1 ..........................................1 3. Connect the speaker wires of the wiring harness. 4. Connect the wiring harness wires in the following order: ground, battery, ignition. 2 ..........................................1
Resumen del contenido incluido en la página 18
KDC-4016_U.Sr2 02.5.15 10:16 AM Page 18 Connecting Wires to Terminals FM/AM antenna input Rear left output (White) Front left output (White) Fuse (10A) (KDC-4016 only) KENWOOD disc changer control input (KDC-4016 only) Front right output (Red) NOTE (KDC-4016 only) To connect the Disc changer, consult your Disc changer manual. Rear right output (Red) If no connections are made, do not let the wire come out from the tab. Wiring harness (Accessory1) White/Black Connect either to the power contro
Resumen del contenido incluido en la página 19
KDC-4016_U.Sr2 02.5.15 10:16 AM Page 19 Installation ■ ■ Installation Installing in Japanese-Made Cars 1 Refer to the section “Removing the hard rubber frame (P. 20)” Firewall or metal support and then remove the hard rubber frame. 2 Align the holes in the unit (two locations on each side) with the vehicle mounting bracket and secure the unit with the Accessory4 accessory screws. N T 8 mm 8mm MAX. MAX. N T/N 5 T 6 ø5mm ø5mm Bend the tabs of the T: Toyota cars mounting sleeve with Accessory5
Resumen del contenido incluido en la página 20
KDC-4016_U.Sr2 02.5.15 10:16 AM Page 20 Installation ■ ■ Removing the hard rubber frame Removing the Unit 1 Refer to the section “Removing the hard rubber frame (P. 20)” 1 Engage the catch pins on the removal tool and remove the two and then remove the hard rubber frame. locks on the lower level. Lower the frame and pull it forward as shown in the figure. 2 Remove the Hex-head screw with integral washer (M4×8) on the back panel. 3 Insert the two removal tools deeply into the slots on each sid
