Manual de instrucciones de JVC KD-S14

Resumen del contenido incluido en la página 1

Thank you for purchasing a JVC product.
KD-S24/KD-S14
Please read all instructions carefully before operation, to ensure your complete understanding and to obtain the best
possible performance from the unit.
CD RECEIVER: INSTRUCTIONS
Installation/connection are explained at the last section of this manual (reverse page, indicated with
symbol).
For customer Use:
Enter below the Model No. and Serial No. which
are located on the top or bottom of the cabinet.
Retain this information for future

Resumen del contenido incluido en la página 2

OPERATIONS Basic operations Control panel Remote controller—RM-RK50 Check the current clock time/other information. Remote sensor 7 Installing battery See also “CLK DISP“ of “General settings—PSM.” DO NOT expose to strong light. Warning: To prevent accidents and damage • Do not install any battery other than CR2025 or its Lithium coin battery (CR2025) • Turn on the power. equivalent. • Turn off the power [Hold]. • Store out of reach of children. • Attenuate the sound (if the • Do not recharge,

Resumen del contenido incluido en la página 3

General settings—PSM TROUBLESHOOTING Enter PSM menu. Select an item. Adjust. Finish Symptoms Remedies/Causes • Sound cannot be heard from the speakers. • Adjust the volume to the optimum level. • Check the cords and connections. Indication Item ( : Initial) Setting • The buttons on the unit do not work as you If you press M MODE, some buttons work differently from it intended. original function. Wait for 5 seconds or press M MODE again. DEMO • DEMO ON : Display demonstration will be act

Resumen del contenido incluido en la página 4

Parts list for installation and connection A B C D Control panel Power cord Sleeve Trim plate E I F G H J K Washer (ø5) Handles Lock nut (M5) Mounting bolt— Rubber cushion Remote controller Battery M5 x 20 mm (M5 x 13/16") INSTALLATION If you are not sure how to install this unit correctly, consult your JVC car audio dealer. In dash-mounting Removing the unit Before removing the unit, release the rear section. When you stand the unit, be careful not to damage the fuse on the rear. Do the requi