Resumen del contenido incluido en la página 1
CD RECEIVER KD-G440
RECEPTOR CON CD KD-G440
RÉCEPTEUR CD KD-G440
For canceling the display demonstration, see page 6.
Para cancelar la demostración en pantalla, consulte la página 6.
Pour annuler la démonstration des affichages, référez-vous à la page 6.
For installation and connections, refer to the separate manual.
For customer Use:
Para la instalación y las conexiones, refiérase al manual separado.
Enter below the Model
Pour l’installation et les raccordements, se référer au manuel séparé
Resumen del contenido incluido en la página 2
Thank you for purchasing a JVC product. Please read all instructions carefully before operation, to ensure your complete understanding and to obtain the best possible performance from the unit. INFORMATION (For U.S.A.) This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates
Resumen del contenido incluido en la página 3
How to reset your unit CONTENTS Control panel .................................. 4 Remote controller — RM-RK50 ........... 5 Getting started ................................ 6 Basic operations ................................................... 6 • Your preset adjustments will also be erased. Radio operations ............................. 7 Disc/USB device operations .............. 8 How to forcibly eject a disc Playing a disc in the unit ..................................... 8 Playing from a
Resumen del contenido incluido en la página 4
Control panel Parts identification Display window 1 5 (up) / ∞ (down) buttons o Number buttons 2 0 (eject) button ; RPT (repeat) button 3 (standby/on attenuator) button a RND (random) button 4 Control dial s AUX (auxiliary) input jack 5 Remote sensor d USB (Universal Serial Bus) input jack DO NOT expose the remote sensor to strong light f Source display / Track number / Folder number / (direct sunlight or artificial lighting). Time countdown indicator 6 BAND button g Tr (track) indicator 7 Lo
Resumen del contenido incluido en la página 5
Main elements and features Remote controller — RM-RK50 Installing the lithium coin battery (CR2025) For USA-California Only: This product contains a CR Coin Cell Lithium Battery which contains Perchlorate Material—special 1 (standby/on/attenuator) button handling may apply. • Turns the power on if pressed briefly or See www.dtsc.ca.gov/hazardouswaste/perchlorate attenuates the sound when the power is on. • Turns the power off if pressed and held. Aim the remote controller directly at th
Resumen del contenido incluido en la página 6
To drop the volume in a Getting started moment (ATT) To restore the sound, press the Basic operations button again. ~ Turn on the power. To turn off the power Ÿ Basic settings • See also “General settings — PSM” on pages * You cannot select these sources if they are not 12 – 14. ready or not connected. 1 ! For FM/AM tuner 2 ⁄ Adjust the volume. 1 Canceling the display demonstrations Select “DEMO,” then “DEMO OFF.” 2 Setting the clock Select “CLOCK HOUR,” then adjust the hour. Selec
Resumen del contenido incluido en la página 7
When an FM stereo broadcast is hard to Radio operations receive ~ Lights up when monaural mode is activated. Ÿ Lights up when receiving an FM stereo broadcast with sufficient signal strength. Reception improves, but the stereo effect will be lost. To restore the stereo effect, repeat the same procedure. “MONO OFF” appears and the MO indicator goes off. ! Start searching for a station. Storing stations in memory You can preset six stations for each band. When a station is received, searchin
Resumen del contenido incluido en la página 8
Manual presetting Disc / USB device Ex.: Storing the FM station of 92.50MHz into preset number 4 of the FM1 band. operations 1 : For built-in CD player operations. : For external USB device operations. 2 Playing a disc in the unit 3 Preset number flashes for a while. Listening to a preset station All tracks will be played repeatedly until you change the 1 source or eject the disc. To stop play and eject the disc 2 Select the preset station (1 – 6) you want. • Press SRC to listen to an
Resumen del contenido incluido en la página 9
To fast-forward or reverse the track Ÿ USB memory To go to the next or previous track If a USB device has been attached... To go to the next or previous folder (for Playback starts from where it has been stopped MP3/WMA) previously. • If a different USB device is currently attached, playback starts from the beginning. To detach the USB device, straightly pull it out from To locate a particular track (for CD) or folder the unit. (for MP3/WMA) directly • Removing the USB device will also sto
Resumen del contenido incluido en la página 10
Other main functions Changing the display information Skipping tracks quickly during play While playing an audio CD or CD Text • For MP3/WMA, you can skip tracks within the same folder. 1 A = Disc title/performer * = Track 1 title * [ ] = B = (back to the beginning) Ex.: To select track 32 while playing tracks whose number is a single digit (1 to 9) While playing an MP3/WMA disc or 1 USB device • When “TAG DISPLAY” is set to “TAG ON” 2 (see page 13) A = Album name/performer (fold
Resumen del contenido incluido en la página 11
Selecting the playback modes Sound adjustments You can use only one of the following playback modes You can select a preset sound mode suitable to the at a time. music genre (iEQ: intelligent equalizer). 1 2 Select your desired playback mode. Preset values BAS MID TRE LOUD 7 Repeat play Indication (For) USER 00 00 00 OFF Mode Plays repeatedly (Flat sound) ROCK TRACK RPT : The current track. [ ] +03 00 +02 OFF FOLDER RPT * : All tracks of the current folder. (Rock or disco music) [ ] CLASSIC
Resumen del contenido incluido en la página 12
Indication, [Range] General settings — PSM 1 BASS * , [–06 to +06] You can change PSM (Preferred Setting Mode) items Adjust the bass. listed in the table on pages 13 and 14. 1 MIDDLE * (mid-range), [–06 to +06] Adjust the mid-range frequencies sound level. 1 1 TREBLE * , [–06 to +06] Adjust the treble. 2 Select a PSM item. 2 FADER * , [R06 to F06] Adjust the front and rear speaker balance. 3 BALANCE * , [L06 to R06] Adjust the left and right speaker balance. 3 Adjust the PSM item selected.
Resumen del contenido incluido en la página 13
Indications Item Selectable settings, [reference page] ( : Initial) DEMO • DEMO ON : The display demonstration will be activated automatically if no Display operation is done for about 20 seconds, [6]. demonstration • DEMO OFF : Cancels. 1 CLOCK DISP * • CLOCK ON : The clock time is shown on the display at all times when the power is Clock display turned off. • CLOCK OFF : Cancels; pressing DISP will show the clock time for about 5 seconds when the power is turned off, [6]. CLOCK HOUR
Resumen del contenido incluido en la página 14
Indications Item Selectable settings, [reference page] ( : Initial) AMP GAIN • LOW POWER : VOLUME 00 – VOLUME 30 (Select this if the maximum power of the Amplifier gain speaker is less than 50 W to avoid damaging the speaker.) control • HIGH POWER : VOLUME 00 – VOLUME 50 AREA • AREA US : When using in North/Central/South America. AM/FM intervals are set Tuner channel to 10 kHz/200 kHz. interval • AREA EU : When using in any other areas. AM/FM intervals are set to 9 kHz/ 50 kHz (100 kHz d
Resumen del contenido incluido en la página 15
Title assignment More about this unit You can assign titles to 30 station frequencies (FM and Basic operations AM) and up to 8 characters for each station name. Turning on the power • By pressing SRC or AUX on the unit, you can also turn 1 Select FM/AM. on the power. If the source is ready, playback also starts. Turning off the power 2 Show the title entry screen. • If you turn off the power while listening to a track, playback will start from where it had been stopped previously next time
Resumen del contenido incluido en la página 16
• When a disc is inserted upside down, “PLEASE” and • This unit can display only one-byte characters. No “EJECT appear alternately on the display. Press 0 to other characters can be correctly displayed. eject the disc. • This unit can play back MP3/WMA files meeting the • While fast-forwarding or reversing on an MP3 or conditions below: WMA disc, you can only hear intermittent sounds. – Bit rate: 8 kbps — 320 kbps – Sampling frequency: 48 kHz, 44.1 kHz, 32 kHz (for MPEG-1) Playing a CD-R or
Resumen del contenido incluido en la página 17
Playing MP3/WMA tracks from a USB device • This unit may not recognized a USB device connected through a USB card reader. • While playing from a USB device, the playback order • This unit may not play back files in a USB device may differ from other players. properly when using a USB extension cord. • This unit may be unable to play back some USB • This unit cannot play back the following files: devices or some files due to their characteristics or – MP3 files encoded with MP3i and MP3 PRO
Resumen del contenido incluido en la página 18
To keep discs clean Maintenance A dirty disc may not play correctly. If a disc does become dirty, wipe it with How to clean the connectors a soft cloth in a straight line from center Frequent detachment will deteriorate the connectors. to edge. To minimize this possibility, periodically wipe the • Do not use any solvents (for example, conventional connectors with a cotton swab or cloth moistened with record cleaner, spray, thinner, benzine, etc.) to clean alcohol, being careful not to d
Resumen del contenido incluido en la página 19
Troubleshooting What appears to be trouble is not always serious. Check the following points before calling a service center. Symptoms Remedies/Causes • Sound cannot be heard from the speakers. • Adjust the volume to the optimum level. • Check the cords and connections. • The unit does not work at all. Reset the unit (see page 3). • SSM automatic presetting does not work. Store stations manually. • Static noise while listening to the radio. Connect the antenna firmly. • Disc cannot be played bac
Resumen del contenido incluido en la página 20
Symptoms Remedies/Causes • Tracks are not played back in the order you The playback order is determined when the files are have intended. recorded. • The elapsed playing time is not correct. This sometimes occurs during playback. This is caused by how the tracks are recorded on the disc. • The correct characters are not displayed (e.g. This unit can only display alphabets (upper case), album name). numbers, and a limited number of symbols. • Noise is generated. The track played back is not an
