Resumen del contenido incluido en la página 1
CD RECEIVER KD-G646/KD-G645
KD-G646/KD-G645
For canceling the display demonstration, see page 6.
For installation and connections, refer to the separate manual.
INSTRUCTIONS
GET0502-005A
[UT]
C Cover_KD-G646_005A_f.indd 1 over_KD-G646_005A_f.indd 1 1 10/22/07 11:32:21 AM 0/22/07 11:32:21 AM
ENGLISH
Resumen del contenido incluido en la página 2
Thank you for purchasing a JVC product. Please read all instructions carefully before operation, to ensure your complete understanding and to obtain the best possible performance from the unit. IMPORTANT FOR LASER PRODUCTS 1. CLASS 1 LASER PRODUCT 2. CAUTION: Do not open the top cover. There are no user serviceable parts inside the unit; leave all servicing to qualified service personnel. 3. CAUTION: Visible and/or invisible class 1M laser radiation when open. Do not view directly with optical
Resumen del contenido incluido en la página 3
How to use the M MODE button CONTENTS If you press M MODE, the unit goes into functions mode, then the number buttons and 5/∞ buttons will work Control panel —KD-G646/KD-G645 ....... 4 as different function buttons. Remote controller — RM-RK50 ........... 5 Ex.: When number button 2 works as Getting started ................................ 6 MO (monaural) button. Basic operations ................................................... 6 Radio operations ............................. 7 Disc/USB d
Resumen del contenido incluido en la página 4
Control panel — KD-G646/KD-G645 Parts identification Display window 1 5 (up) / ∞ (down) buttons o Number buttons 2 0 (eject) button ; RPT (repeat) button 3 (standby/on attenuator) button a RND (random) button 4 Control dial s AUX (auxiliary) input jack 5 Remote sensor d USB (Universal Serial Bus) input jack DO NOT expose the remote sensor to strong light f Source display / Track number / Folder number / (direct sunlight or artificial lighting). Time countdown indicator 6 BAND button g Tr (tra
Resumen del contenido incluido en la página 5
Main elements and features Remote controller — RM-RK50 Installing the lithium coin battery (CR2025) Aim the remote controller directly at the remote sensor on the unit. Make sure there is no obstacle 1 (standby/on/attenuator) button in between. • Turns the power on if pressed briefly or attenuates the sound when the power is on. • Turns the power off if pressed and held. Warning: 2 5 U (up) / D (down) ∞ buttons • Changes the FM/AM bands with 5 U. • Do not install any battery other than
Resumen del contenido incluido en la página 6
Basic settings Getting started • See also “General settings — PSM” on pages 12 and Basic operations 13. ~ Turn on the power. 1 2 Ÿ 1 Canceling the display demonstrations Select “DEMO,” then “DEMO OFF.” * You cannot select these sources if they are not 2 Setting the clock ready or not connected. Select “CLOCK HOUR,” then adjust the hour. Select “CLOCK MIN” (minute), then adjust the ! For FM/AM tuner minute. 3 Finish the procedure. ⁄ Adjust the volume. To check the current clock time
Resumen del contenido incluido en la página 7
When an FM stereo broadcast is hard to Radio operations receive ~ Lights up when monaural mode is activated. Ÿ Lights up when receiving an FM stereo broadcast with sufficient signal strength. Reception improves, but the stereo effect will be lost. To restore the stereo effect, repeat the same procedure. “MONO OFF” appears and the MO indicator goes off. ! Start searching for a station. Storing stations in memory You can preset six stations for each band. When a station is received, searchin
Resumen del contenido incluido en la página 8
Manual presetting Disc / USB device Ex.: Storing the FM station of 92.50MHz into preset number 4 of the FM1 band. operations 1 : For built-in CD player operations. : For external USB device operations. 2 Playing a disc in the unit 3 Preset number flashes for a while. Listening to a preset station All tracks will be played repeatedly until you change the source or eject the disc. 1 To stop play and eject the disc 2 Select the preset station (1 – 6) you want. • Press SRC to listen to an
Resumen del contenido incluido en la página 9
To fast-forward or reverse the track Ÿ USB memory To go to the next or previous track If a USB device has been attached... To go to the next or previous folder (for Playback starts from where it has been stopped MP3/WMA) previously. • If a different USB device is currently attached, playback starts from the beginning. To detach the USB device, straightly pull it out from To locate a particular track (for CD) or folder the unit. (for MP3/WMA) directly • Removing the USB device will also sto
Resumen del contenido incluido en la página 10
Other main functions Changing the display information Skipping tracks quickly during play While playing an audio CD or CD Text • For MP3/WMA, you can skip tracks within the same folder 1 A = Disc title/performer * = Track 1 title * [ ] = B = (back to the beginning) Ex.: To select track 32 while playing tracks whose number is a single digit (1 to 9) While playing an MP3/WMA disc or 1 USB device • When “TAG DISPLAY” is set to “TAG ON” 2 (see page 13) A = Album name/performer (folde
Resumen del contenido incluido en la página 11
Selecting the playback modes Sound adjustments You can use only one of the following playback modes You can select a preset sound mode suitable to the at a time. music genre (iEQ: intelligent equalizer). 1 2 Select your desired playback mode. Preset values BAS MID TRE LOUD 7 Repeat play Indication (For) USER 00 00 00 OFF Mode Plays repeatedly (Flat sound) ROCK TRACK RPT : The current track. [ ] +03 00 +02 OFF FOLDER RPT * : All tracks of the current folder. (Rock or disco music) [ ] CLASSIC
Resumen del contenido incluido en la página 12
Indication, [Range] General settings — PSM 1 BASS * , [–06 to +06] You can change PSM (Preferred Setting Mode) items Adjust the bass. listed in the table on page 13. 1 MIDDLE * (mid-range), [–06 to +06] Adjust the mid-range frequencies sound level. 1 1 TREBLE * , [–06 to +06] Adjust the treble. 2 Select a PSM item. 2 FADER * , [R06 to F06] Adjust the front and rear speaker output balance. 3 BALANCE * , [L06 to R06] Adjust the left and right speaker output balance. 3 Adjust the PSM item sel
Resumen del contenido incluido en la página 13
Indications Item Selectable settings, [reference page] ( : Initial) DEMO • DEMO ON : The display demonstration will be activated automatically if no Display operation is done for about 20 seconds, [6]. demonstration • DEMO OFF : Cancels. 1 CLOCK DISP * • CLOCK ON : The clock time is shown on the display at all times when the power is Clock display turned off. • CLOCK OFF : Cancels; pressing DISP will show the clock time for about 5 seconds when the power is turned off, [6]. CLOCK HOUR
Resumen del contenido incluido en la página 14
Other external component Title assignment operations You can assign titles to 30 station frequencies (FM and AM) and up to 8 characters for each station name. You can connect an external component to the AUX (auxiliary) input jack on the control panel. 1 Select FM/AM. 2 Show the title entry screen. Portable audio player, etc 3.5 mm stereo mini plug 3 Assign a title. (not supplied) 1 Select a character. ~ • You can also select “AUX IN” as the playback source by pressing the SRC (source) butt
Resumen del contenido incluido en la página 15
To keep discs clean Maintenance A dirty disc may not play correctly. If a disc does become dirty, wipe it with How to clean the connectors a soft cloth in a straight line from center Frequent detachment will deteriorate the connectors. to edge. To minimize this possibility, periodically wipe the • Do not use any solvents (for example, conventional connectors with a cotton swab or cloth moistened with record cleaner, spray, thinner, benzine, etc.) to clean alcohol, being careful not to d
Resumen del contenido incluido en la página 16
• MP3 and WMA “tracks” (words “file” and “track” are More about this unit used interchangeably) are recorded in “folders.” • When a disc is inserted upside down, “PLEASE” and Basic operations “EJECT appear alternately on the display. Press 0 to eject the disc. Turning on the power • While fast-forwarding or reversing on an MP3 or • By pressing SRC or AUX on the unit, you can also turn WMA disc, you can only hear intermittent sounds. on the power. If the source is ready, playback also star
Resumen del contenido incluido en la página 17
Playing an MP3/WMA disc • This unit cannot play back the following files: – MP3 files encoded in MP3i and MP3 PRO format. • This unit can play back MP3/WMA files with the – MP3 files encoded in an inappropriate format. extension code <.mp3> or <.wma> (regardless of – MP3 files encoded with Layer 1/2. the letter case—upper/lower). – WMA files encoded in lossless, professional, and • This unit can show the names of albums, artists voice format. (performer), and Tag (Version 1.0, 1.1, 2.2,
Resumen del contenido incluido en la página 18
• The maximum number of characters for: General settings—PSM – Folder names : 25 characters • “AUTO” setting for “DIMMER” may not work correctly – File names : 25 characters on some vehicles, particularly on those having a – MP3 Tag : 128 characters control dial for dimming. – WMA Tag : 64 characters In this case, change the “DIMMER” setting to any • This unit can recognize a total of 2 500 files, 255 other than “AUTO.” folders (999 files per folder), and of 8 hierarchies. • If you ch
Resumen del contenido incluido en la página 19
Troubleshooting What appears to be trouble is not always serious. Check the following points before calling a service center. Symptoms Remedies/Causes • Sound cannot be heard from the speakers. • Adjust the volume to the optimum level. • Check the cords and connections. • The unit does not work at all. Reset the unit (see page 2). • SSM automatic presetting does not work. Store stations manually. • Static noise while listening to the radio. Connect the antenna firmly. • Disc cannot be played bac
Resumen del contenido incluido en la página 20
Symptoms Remedies/Causes • Tracks are not played back in the order you The playback order is determined when the files are have intended. recorded. • The elapsed playing time is not correct. This sometimes occurs during playback. This is caused by how the tracks are recorded on the disc. • The correct characters are not displayed (e.g. This unit can only display alphabets (upper case), album name). numbers, and a limited number of symbols. • Noise is generated. The track played back is not an
