Manual de instrucciones de Farenheit Technologies EFM-01

Resumen del contenido incluido en la página 1

Digital
FM Stereo Modulator
Multi-Channel PLL Synthesizer
MODEL : EFM-01
OWNER'S MANUAL

Resumen del contenido incluido en la página 2

FEATURE High reliability PLL synthesized tuning system Provide 8 carrier frequencies High isolation from nonessential frequencies Compact and light, Can be placed behind the radio inside the dashboard. SPECIFICATIONS Design and specifications are subject to change without notice.

Resumen del contenido incluido en la página 3

WARNING TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK. DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE. CAUTION TO PREVENT ELECTRICS SHOCK MATCH POLRAITY OF POWER SOURCE, USE DC12V OF CAR BATERY ONLY. IMPORTANT SAFETY INSTRUCTIONS This unit is fully transistorized and does not contain any parts that can be repaired by the user. DO NOT REMOVE THE CABINET COVER, OR YOU MAY BE EXPOSED TO DANGEROUS VOLTAGE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL ONLY. 1. Read owner' s manual After u

Resumen del contenido incluido en la página 4

3. Heat The product should be situated away from heat sources such as radiators, heat register or other products (including amplifiers) that produce heat. 4. Water and Moisture Do not use this product near water-for example, near a bath tub, wash bowl, kitchen sink, or laundry tub in a wet basement or near a swimming pool and the lake. 5. Object and Liquid entry Never push objects of any kind into this product through openings as they may touch dangerous voltage points or short-out part

Resumen del contenido incluido en la página 5

CONNECTING TO CAR FM RADIO SYSTEM FM Stereo Modulator Mull-Channel PLL Synlhesller 1. Connect GROUND terminal(@). then connect the terminal of fuse cable(@) to DC 12V which to be supplied when you turn on your instruments. Cut and delete terminal(Q)if you do not use it. It may cause eletric short if you leave as it is, so you may be exposed to any risk or accidents. 2. Connect AUDIO INPUT jack(@)from audio output jack of audio sources. VCR, CD player, DVD, MD, etc,. This unit is prepared

Resumen del contenido incluido en la página 6

-HOWTO SETm FREQUENCY You can set the FM carrier frequency which can be use in your car FM tuner by setting DIP switch that it is located on bottom side. How to set FM carrier frequencies are as follows. 88.5 MHz 88.7 MHz 88.9 MHz 89.1 MHz 89.9 MHz 89.3 MHz 89.5 MHz 89.7 MHz r Pin 1 is not available.