Resumen del contenido incluido en la página 1
XD622W
INSTALLATION/OWNERS MANUAL
AM/FM/CD Weather Receiver
Resumen del contenido incluido en la página 2
XD622W INSTALLATION Preparation Please read entire manual before installation. Before You Start • Disconnect negative battery terminal. (consult a qualified technician for instructions) •Avoid installing the unit where it would be subject to high temperatures, such as from direct sunlight, or where it would be subject to dust, dirt or excessive vibration. Getting Started • Remove 2 transit screws located on top of the unit. • Insert the supplied keys into the slots as shown, and slide the unit
Resumen del contenido incluido en la página 3
XD622W INSTALLATION Wiring Diagram FUSE When replacing a fuse, make sure new fuse is the correct type and amperage. Using an incorrect fuse could damage the radio. The XD622W uses one 10 amp ATM fuse located beside the wiring connector. 3
Resumen del contenido incluido en la página 4
XD622W OPERATION Control Locations 1 2 3 4 5 6 7 8 9 10 20 19 18 17 16 15 14 13 12 11 Release Mode 1 11 Power Bass Boost 2 12 Audio Preset 6 3 13 Scan Preset 5 4 14 5 Display 15 Preset 4 6 Auto Store/Preset Scan 16 Preset 3/CD Intro 7 EQ 17 Preset 2/CD Random 8 Tune/Track Down 18 Preset 1/CD Repeat 9 Eject 19 Play/Pause/Band 10 20 Tune/Track Up Mute For semi-permanent faceplate installation, remove trim ring *Semi-permanent and install supplied Phillips head #1 screw through left side Faceplate
Resumen del contenido incluido en la página 5
XD622W OPERATION General Operation Faceplate Removal Press RELEASE and pull away from the left side to remove. To re-install, insert right side of faceplate first then push left side to secure. Power On/Off Press PWR or any other button (except eject) to turn the unit on. Inserting a CD will turn the unit on automatically. Press PWR to turn the unit off. Mode Press MODE to select between AM/FM tuner, weatherband tuner, CD player and auxiliary input. Modes of operation are indicated in the displa
Resumen del contenido incluido en la página 6
XD622W OPERATION General Operation Programmable Press and hold DISP then press TUNE to select radio Display Priority frequency (tuner mode) or CD track/ elapsed time (CD player mode) display priority (default). Clock is accessed by pressing DISP momentarily. Press and hold DISP then press TUNE to select clock display priority. Radio frequency or CD track/elapsed time is accessed by pressing DISP momentarily. Programmable Programs unit to display clock/no clock when unit is off. Clock Priority Pr
Resumen del contenido incluido en la página 7
XD622W OPERATION AM/FM Tuner Operation Press TUNE or momentarily to seek the next Seek Tuning strong station. Press TUNE or for more than 2 seconds, then Manual Tuning release. "MANU" will momentarily appear in the display. Press TUNE or momentarily to move radio frequency up or down one step at a time. Press and hold to advance quickly. If tuning is not adjusted for 5 seconds, the unit will return to seek tuning mode (default). "AUTO" will momentarily appear in the display. Press SCAN to previe
Resumen del contenido incluido en la página 8
XD622W OPERATION Weatherband Tuner Operation Manual Tuning Press TUNE or momentarily to seek the next weatherband station. Direct Tuning Press preset 1~6 or BAND to directly access the 7 weatherband stations. Refer to the table below. Weatherband Stations - Direct Tuning Table Button WB Frequency LCD Display Preset 1 162.400 MHz Wb - 1 Preset 2 162.425 MHz Wb - 2 Preset 3 162.450 MHz Wb - 3 Preset 4 162.475 MHz Wb - 4 Preset 5 162.500 MHz Wb - 5 Preset 6 162.525 MHz Wb - 6 BAND 162.550 MHz Wb -
Resumen del contenido incluido en la página 9
XD622W OPERATION CD Player Operation Insert CD With the label facing up, insert a standard size CD into the CD slot. The CD will automatically begin playback. Eject CD Press the EJECT button to stop and eject the CD. The unit will change to previous mode of operation (AM/FM tuner, Weatherband tuner or auxiliary input). If the disc is not removed within 10 seconds, the unit will reload the disc. The unit does not have to be turned on to eject CD. Track Select Press TRACK to skip to the beginning
Resumen del contenido incluido en la página 10
XD622W WARRANTY Limited One-Year Warranty This warranty gives you specific legal rights. What to do? You may also have other rights which vary from state 1. Before you call for service, check your operating to state. instructions. A slight adjustment of any custom controls may save you a service call. Namsung America Inc. warrants this product to the original purchaser to be free from defects in material 2. If you require service during the warranty period, and workmanship, under normal conditio
Resumen del contenido incluido en la página 11
XD622W OPERATION Specifications CD Player Signal-to-noise: >92dB Frequency response: 10Hz-20kHz Channel separation @ 1kHz: >65dB D/A converter: 1 Bit FM Tuner Tuning range: 87.5MHz-107.9MHz Usable sensitivity: 8.5dBf 50dB quieting sensitivity: 10dBf Stereo separation @ 1kHz: 40dB Frequency response: 30Hz-13kHz AM Tuner Tuning range: 530kHz-1710kHz Usable sensitivity: 22uV Frequency response: 30Hz-2.2kHz Wetherband Tuner Tuning range: 162.400MHz-162.550MHz General Total power output: 208 Watts
Resumen del contenido incluido en la página 12
XD622W OPERATION Troubleshooting Problem Cause Action Unit will not turn on Yellow wire not connected or incorrect voltage Check connections for proper voltage Red wire not connected or incorrect voltage (11~16VDC) (no power) Black wire not connected Check connection to ground Fuse blown Replace fuse Speaker wires not connected Check connections at speakers Unit has power (but no sound) One or more speaker wires touching each Insulate all bare speaker wires from other or touching chassis groun
Resumen del contenido incluido en la página 13
DMP65 INSTALLATION/OWNERS MANUAL 6.5" Dual Cone Marine Speakers MARINE
Resumen del contenido incluido en la página 14
DMP65 INSTALLATION Preparation/Installation Please read entire manual before installation. Before You Start • Disconnect negative battery terminal. (consult a qualified technician for instructions) • Use extreme caution when drilling holes to avoid damaging fuel lines, hydraulic lines or existing wiring. Getting Started • Determine where the speakers will be mounted. Ensure an area large enough for the speaker to mount evenly. Be sure the mounting location is deep enough for the speaker to fit
Resumen del contenido incluido en la página 15
DMP65 WARRANTY Limited One-Year Warranty This warranty gives you specific legal rights. You may What to do? If the product requires warranty service, also have other rights which vary from state to state. you must prepay the initial shipping charges. DUAL will pay the return shipping charges if the product is Namsung America Inc. warrants this product to the returned to an address within the USA. original purchaser to be free from defects in material and workmanship, under normal conditions, for
Resumen del contenido incluido en la página 16
DMP65 SPECIFICATIONS Specifications 7.13" Outside Diameter 2.5" Mounting Depth .88" Mounting Height 5.13" Cut-out Diameter 45Hz-18kHz, ±3dB Frequency Response 90dB 1W/1M Sensitivity 4 ohms Impedance 20 Watts RMS Power 60 Watts Peak Power Specifications subject to change without notice Namsung America Inc. 21318 64th Ave. South Kent, WA 98032 Toll Free: 1-866-626-7863 ©2003 Namsung America, Inc. EVOK0603-V01
