Manual de instrucciones de Curtis RCD641

Resumen del contenido incluido en la página 1

Table of Contents Page No


PRECAUTIONS ----------------------------------------------------------------------------------------- E-2


IMPORTANT SAFETY INSTRUCTION ------------------------------------------------------------ E-3

WARNING ----------------------------------------------------------------------------------------------- E-6
STEREO HI-FI SYSTEM
INSTALLATION ----------------------------------------------------------------------------------------- E-7
With CD PLAYER
O

Resumen del contenido incluido en la página 2

PRECAUTIONS IMPORTANT SAFETY INSTRUCTIONS Please take good note of the following instruction: 1. Read instructions – All the safety and operating instructions should be read before the product is operated. l The unit must be connected to the l Avoid strong magnetic fields, e.g. power voltage, which is the same as near TVs or speakers for other 2. Retain instruction – The safety and operating instructions should be retained for future the local area. If not, there is a danger units.

Resumen del contenido incluido en la página 3

14. Lightning – For added protection for this product during a lightning storm, or when it is left a. When the power-supply cord or plug is damaged. unattended and unused for long periods of time, unplug it from the wall outlet and disconnect b. If liquid has been spilled, or objects have fallen into the product. the antenna or cable system. This will prevent damage to the product due to lightning and c. If the product has been exposed to rain or water. power line surges. d. If the product do

Resumen del contenido incluido en la página 4

WARNING INSTALLATION RUBBER SLEEVE Read the instruction manual before you attempt to use the unit. Handle glass panels with care. FOR TABLE TOP Consult your dealer or service personnel if you have questions about the installation, operation or safety of the unit. l Put the main unit and the SUPPORT PLATE speaker on a piece of soft Make sure unit is plugged into an 110V-127V outlet. Using higher voltage outlets could cause the cloth, which for preventing unit to malfunction or

Resumen del contenido incluido en la página 5

OPERATING ELEMENTS SETTING UP AND CONNECTING THE STEREO SYSTEM 15 Front view Antenna connection 7 1 1. Display 2. Power Indicator 2 8 FM: Install the FM Antenna wire connecting 3. VOL 5 Button 9 plate to FM Antenna Terminal (19) and 4. POWER Button 3 10 tighten it with a screwdriver. Or plug in the 5. CD DOOR Open/Close Button 16 4 FM Antenna (optional). If stereo broadcast 11 6. VOL 6 Button received, the STEREO indicator will be 5 12 7. Remote Sensor displayed

Resumen del contenido incluido en la página 6

CLOCK AND TIMER LISTENING TO THE RADIO CLOCK 1. Press POWER (4) (43) to turn unit on. 1. While unit is off (still plugged in), press CLOCK ADJ. (42) once. Hour digits will flash. 2. Press TUNER (10,39) to select radio mode. 2. Press /SEARCH (12,36) and / SEARCH (14,27) to select correct hour. 3. Press BAND (10,40) to select AM or FM band. 3. Press CLOCK ADJ. (42) again. Minute’s digits will flash. 4. Press TUNING + (12,35) or TUNING – (14,26) to select the desired station. For automati

Resumen del contenido incluido en la página 7

programmed. AM: The bar antenna is not Reposition the unit until best 3. Press PROGRAM (47) when you have reached the desired song. The track will be stored in positioned correctly. reception is obtained. PROGRAM. FM STEREO does not You have tuned to a mono Select another FM station. 4. Repeat steps to program additional tracks. appear on display. station or station too weak. 5. When programming is complete, press PLAY/PAUSE (9,28) to play the programmed AM or FM, no sound. Unit not