Resumen del contenido incluido en la página 1
ROOM AIR CONDITIONER
Use & Care Guide
ACONDICIONADOR DE AIRE PARA HABITACIÓN
Manual de Uso y Cuidado
CLIMATISEUR DE PIÈCE
Guide d’utilisation et d’entretien
Model:
ESA424K ESA424K-L
For questions about features, operation/performance, parts,
accessories or service call: 1-877-337-3639
Si tiene preguntas respecto a las características, funcionamiento,
rendimiento, partes, accesorios o servicio técnico,
llame al: 1-877-337-3639
Au Canada, pour assistance, installation ou service,
composez le
Resumen del contenido incluido en la página 2
TABLE OF CONTENTS AIR CONDITIONER SAFETY ........................................................3 Using the Remote Control...........................................................11 INSTALLATION REQUIREMENTS.................................................3 Changing Air Direction ................................................................12 Tools and Parts ............................................................................3 Normal Sounds.................................
Resumen del contenido incluido en la página 3
AIR CONDITIONER SAFETY Your safety and the safety of others is very important. We have provided many important safety messages in this manual and on your appliance. Always read and obey all safety messages. This is the safety alert symbol. This symbol alerts you to potential hazards that can kill or hurt you and others. All safety messages will follow the safety alert symbol and either the word “DANGER” or “WARNING.” These words mean: You can be killed or seriously injured if you don't immediat
Resumen del contenido incluido en la página 4
Electrical Requirements Location Requirements IMPORTANT: Observe all governing codes and ordinances. Check the location where the air conditioner will be installed. Make sure you have everything necessary for correct installation. The location should provide: Grounded electrical outlet within 4 ft (122 cm) of where the power cord exits the air conditioner. NOTE: Do not use an extension cord. Free movement of air in room to be cooled. A large enough opening for the air conditioner. Inst
Resumen del contenido incluido en la página 5
RESET TEST Power Supply Cord NOTE: Your air conditioner’s device may differ from the one shown. A B A. Test button B. Reset button This room air conditioner is equipped with a power supply cord required by UL. This power supply cord contains state-of-the-art To test your power supply cord: electronics that sense current leakage. If the cord is crushed, the electronics detect current leakage and power will be disconnected 1. Plug power supply cord into a grounded 3 prong outlet. in a fraction o
Resumen del contenido incluido en la página 6
NOTE: Cover putty knife blade with masking tape to guard Prepare Window for Installation 1. Measure the width of the window opening. 2. Mark the center line on the inside windowsill. A B A. Width of window opening B. Center line CAUTION:Never expose plastic front or grille to extreme Position Air Conditioner temperatures. Assemble Curtain/Top channel NOTE: Attach curtains to the air conditioner before placing the air conditioner in window. 1. Install top channel with four 13/32” scre
Resumen del contenido incluido en la página 7
Install outer case in window installation bracket and adjust them to proper length ,then use 1. Place outer case in window. Lower sash until it rests behind behind window sill. A. Top channel 6. Use a wood block between the leveling bolts and the wall if the B. Window sash wall is weak or if the weight of the air conditioner falls between C. Bottom channel the studs in the wall. 2. Expand both curtains to contact the window frame. Install four wood screws 31/32”. Two in each upper ri
Resumen del contenido incluido en la página 8
2. Place the window lock bracket as shown. Use a 1⁄8” drill bit to drill a starter hole through the hole in the window lock bracket and into the upper window. 3. Attach the window lock bracket to the upper window with one 31⁄32” screw to secure the window in place. 1. Plug into a grounded 3 prong outlet. 2. Press RESET on the power supply cord. See “Electrical Requirements.” Return chassis to the outer case Find someone to help you replace the chassis in outer case. Replace front panel and
Resumen del contenido incluido en la página 9
AIR CONDITIONER USE Do not try to operate your air conditioner in the Cool mode when Operating your air conditioner properly helps you to obtain the best possible results. outside temperature is below 61°F (16°C). The inside evaporator coil will freeze up, and the air conditioner will not operate This section explains proper air conditioner operation. properly. IMPORTANT: If you turn off the air conditioner, wait at least 3 minutes before turning it back on. This keeps the air conditioner
Resumen del contenido incluido en la página 10
To set the Timer to turn on the air conditioner, changing Temperature the previous settings: 1. Turn on the air conditioner. Press the TEMP/TIME up arrow button to raise the 2. Adjust the mode to Fan, Cool, Energy Saver or Dehum. temperature. Each time you press or hold the TEMP/TIME up 3. For Fan, Cool or Energy Saver mode, adjust the fan speed to arrow button, the temperature will go up 1ºF until it reaches High, Med or Low. 86°F (30°C). 4. Adjust the temperature between 61ºF and 86ºF
Resumen del contenido incluido en la página 11
Using the Remote Control NOTE: Remote control may differ in appearance. Temperature Press the TEMP/TIME up arrow button to raise the ON/OFF temperature. Each time you press or hold the TEMP/TIME up arrow button, the temperature will go up 1ºF until it reaches MODE 86°F (30°C). SPEED TEMP/TIME TIMER TEMP/TIME Press the TEMP/TIME down arrow button to lower the TEMP/TIME temperature. Each time you press or hold the TEMP/TIME down arrow button, the temperature will go down 1ºF until it reach
Resumen del contenido incluido en la página 12
4. Adjust the temperature between 61ºF and 86ºF (16ºC and Changing Air Direction 30ºC). NOTE: In Fan mode, the temperature cannot be set. 4-Way Air Flow:The air directional louvers let you control the 5. Press TIMER. Timer On indicator light on the air conditioner before the air conditioner will turn on. directed up-down,left-right. 6. Press the TEMP/TIME up or down arrow button to change Vent:The Fresh air vent allows the air conditioner to recirculat the delay time from 1 hour to 24 ho
Resumen del contenido incluido en la página 13
dirty, wash it in warm water with a mild detergent. Do not 5. Close the front panel. 6. Turn on the air conditioner. Cleaning the Front Panel 1. Turn off the air conditioner. 2. Clean the front panel with a soft, damp cloth. 3. Air dry the front panel completely. 4. Turn on the air conditioner. Annual Maintenance Air Conditioner Your air conditioner needs annual maintenance to help ensure steady, top performance throughout the year. Call your local authorized dealer to schedule an
Resumen del contenido incluido en la página 14
An extension cord is being used. Do not use an extension Air conditioner cycles on and off too much or does not cord with this or any other appliance. cool room in cooling mode You are trying to restart the air conditioner too soon after turning off the air conditioner. Wait at least 3 minutes after The air conditioner is not properly sized for your room. turning off the air conditioner before trying to restart the air Check the cooling capabilities of your room air conditioner. conditioner.
Resumen del contenido incluido en la página 15
ASSISTANCE OR SERVICE Before calling for assistance or service, please check “Troubleshooting.” It may save you the cost of a service call. If label. See “Electrical Requirements” for the location of the model you still need help, follow the instructions below. and serial number label. Please record the model and serial number information below. When calling, please know the purchase date and the complete Also, record the purchase date of your appliance and the store’s model and serial number
Resumen del contenido incluido en la página 16
LIMITED WARRANTY ONE YEAR LIMITED WARRANTY This warranty covers all defects in workmanship or material for the mechanical and electrical parts (including labor costs) contained in this product for a period of 12 months from the date of purchase. For commercial or rental application, the warranty is 90 days. You must keep and be able to provide your original sales receipt as proof of the date of purchase. FIVE YEAR LIMITED WARRANTY ON THE SEALED SYSTEM The sealed system and compressor (hermetic
Resumen del contenido incluido en la página 17
SEGURIDAD DEL ACONDICIONADOR DE AIRE Su seguridad y la seguridad de los demás es muy importante. Hemos incluido muchos mensajes importantes de seguridad en este manual y en su electrodoméstico. Lea y obedezca siempre todos los mensajes de seguridad. Este es el símbolo de advertencia de seguridad. Este símbolo le llama la atención sobre peligros potenciales que pueden ocasionar la muerte o una lesión a usted y a los demás. Todos los mensajes de seguridad irán a continuación del símbolo de adver
Resumen del contenido incluido en la página 18
Requisitos de ubicación Requisitos eléctricos IMPORTANTE:Observe todos los códigos y reglamentos aplicables. ADVERTENCIA Asegúrese de tener todo lo necesario para una instalación correcta. El lugar debe tener: de donde el cable eléctrico sale del acondicionador de aire. NOTA: No use un cable eléctrico de extensión. Libertad de movimiento del aire en la habitación que desea Peligro de Choque Eléctrico enfriar. Conecte a un contacto de pared de
Resumen del contenido incluido en la página 19
RESET TEST Para poner a prueba el cable de suministro de energía: Cable de suministro de energía 1. Enchufe el cable de suministro de energía en un tomacorriente de 3 terminales con conexión a tierra. NOTA:El dispositivo de su acondicionador de aire puede ser diferente del que se ilustra. 2. Presione RESET (Reposición) (en algunos aparatos se A B 3. Presione TEST (Prueba) (escuche el chasquido, el botón de luz verde). 4. Presione y suelte RESET (escuche el chasquido, el
Resumen del contenido incluido en la página 20
Prepare el acondicionador de aire para la instalación Preparación de la ventana para la instalación Preparacion de la unidad para la instalación 1. Mida el ancho de la abertura de la ventana. 2. Marque la línea central en el lado interior de la repisa de la Desempaque la unidad al lado del lugar de instalación. 1. Retire los dos tornillos del frente,Utilice un pequeno cuchillo para ventana. separar la caja externa del frente. 2. Retire los dos tornillos en la parte superior de la ca
