Manual de instrucciones de Audiovox TERK TV5

Resumen del contenido incluido en la página 1

Performance Specifications
Channels:
VHF: 2-13
UHF: 14-69
Operating Bandwidth: 54 MHz to 806 MHz
Output Impedance: 75 ohms
3
Dimensions (with elements): 4 /4"H x 25"W x 12"D
Amplifier Gain: VHF: 12 dB min
UHF: 6 dB min
Limited Warranty
Audiovox Corporation (Audiovox) warrants this product against defects in
materials or workmanship for one (1) year from the date of purchase. During
this period, this product will be replaced without charge. This warranty does
not cover any damage due to acts

Resumen del contenido incluido en la página 2

TV5 OWNER’S MANUAL TV5 Indoor Amplified Television Antenna

Resumen del contenido incluido en la página 3

TV5 About Your TERK TV5 Thank you for choosing the TERK TV5. TERK antennas are designed to help deliver sharp, clear video reception. Our engineering department is dedicated to designing antennas that enhance both the latest technology and the aesthetics of any viewing environment. The TV5 installs in minutes, is easy to use and simple to adjust. Before using your antenna, please remove all parts from the box and read the owner’s manual carefully. Amplified Indoor Antenna: The TV5 features a ful

Resumen del contenido incluido en la página 4

TV5 media antenna on Assembly And Installing Your TV5 1 2 3 4 67 8 9 10 5 6. Amplifier On/Off 1. Receiving Elements Switch 2. Center Cap 7. Video Selector Switch 3. Coaxial Cable 8. Amplifier Adjust 4. Center Control Arm 9. DC Power Input 5. Antenna/Video 10. Video Input Power Indicators Assembly: Assembly of your TV5 is easy. Simply insert the receiving elements into the center control arm and hand-screw the center cap, making sure you have a snug fit. See Fig 1. UHF Band Separator VHF/UHF

Resumen del contenido incluido en la página 5

TV5 Installation (continued) Connecting your TV5 There are two ways to connect your TV5. This will depend on your model of television. For Televisions with One 75 Ohm Input for VHF and UHF: 1. Connect the coaxial cable from your TV5 to the “F” connector input marked VHF/UHF on your TV. See Fig 2. For Televisions with Separate 75 Ohm VHF and UHF Inputs: 1. Attach the band separator (included) to the coaxial cable attached to the back of your TV5. 2. Screw in the VHF connector from the band

Resumen del contenido incluido en la página 6

TV5 Operating Your TERK TV5 Low- Profile Indoor Amplified Antenna For VHF and UHF: 1. Switch video selector switch to “Antenna”. 2. Tune your TV to the desired station. 3. Holding the top of the center control arm, simply rotate the antenna to seek the best quality picture. 4. Adjust the “amplification”slider for the best picture and sound For Video Games and Other Video Components: 1. Attach the coaxial cable from your satellite, cable, or video game adapter to the video input on your TV5. E

Resumen del contenido incluido en la página 7

TV5 Operating Your TV5 (continued) Please Note: 1. Do not force the center control arm past its normal rotation positions. 2. Do not place your TV5 near large metal objects or appliances that would create interference. 2. Do not lift your TV5 by its receiving elements or place objects on them. 4. Late model televisions have on-screen menu controls for viewing VHF/UHF “Off-Air” or cable broadcasts. Please ensure that this menu control is at the proper “Off-Air” position. Locating Your TV5 Your TV

Resumen del contenido incluido en la página 8

TV5 Frequently Asked Questions Q. I have a cable ready TV. Why am I not getting any channels above 13? A. The tuners inside of cable ready TVs have two modes. One mode is for cable and the other mode is for antenna. When the TV is in cable mode, and you are using an antenna, you will not be able to receive any channels above 13. To fix this, simply access the menu of your TV and switch the TV from Cable/CATV mode to ANT/AIR mode. Q. I have my TV in a metal cabinet. Will the antenna work? A. Any