Resumen del contenido incluido en la página 1
21PT2252 21PT2252
21PT2252
Operating Instructions
1
1-4/E 1 11/9/01, 3:30 PM
Resumen del contenido incluido en la página 2
TABLE OF CONTENTS Introduction Safety Information/Useful Tips .................................................................................................. 3 Before Calling Service ................................................................................................................. 4 Basic Installation/Functions Hooking Up Your TV (Basic Connection) ............................................................................... 5 Use/Care of remote Control ......................
Resumen del contenido incluido en la página 3
SAFETY INFORMATION AND USEFUL TIPS Safety Information • Disconnect mains plug when : – the red light below the TV screen is flashing continuously. – a bright white line is displayed across the screen. – cleaning the TV screen. Never use abrasive cleaning agents. Use a slight damp chamois leather or soft cloth. – there is a lightning storm. – the set is left unattended for a prolonged period of time. • No naked flame sources, such as lighted candles, should be placed on top of the TV or in the vi
Resumen del contenido incluido en la página 4
BEFORE CALLING SERVICE Below is a list of frequently occurred symptoms. Before you call for service, make these simple checks. Some of these symptoms can easily be rectified if you know what to do. Symptom What you should do Colour patch • Switch off the TV by the mains power button. Wait for 20 (uneveness) minutes before switching on again. • Check the TV is not placed too near speakers or magnetic objects. No power • Check the TV’s AC power cord is plugged into the mains socket. If there is st
Resumen del contenido incluido en la página 5
HOOKING UP YOUR TV (BASIC CONNECTION) Antenna Connection • Connect the aerial plug to the antenna socket ¬¬¬¬¬ on the backcover. • Insert the mains plug into the wall socket. Mains Connection • For correct mains voltage, refer to type sticker at the rear of the TV set • Consult your dealer if mains supply is different. Note : This diagram is not representative of the actual plug and socket. Switching on the Set • Press the main power button to switch on/ off the TV. • If the set is on standby (i
Resumen del contenido incluido en la página 6
CONNECTING THE AUDIO/VIDEO SOCKETS (PLAYBACK) VIDEO Y AV sockets on the rear of TV L S-VIDEO Pb AUDIO R Pr COMPONENT VIDEO INPUT Monitor AV1 AV2 out in in OUT OUT OUT ANTENNA VIDEO L R AUDIO Back of VCR IN IN IN VCR (equipped with Video and Audio output sockets) You can view the playback of VCR tapes (Video Disc players, camcorders, etc.) by using the AUDIO and VIDEO INPUT sockets on the rear of the TV. – Connect the VIDEO and AUDIO IN sockets on the rear of the TV to the AUDIO and VIDEO OUT
Resumen del contenido incluido en la página 7
CONNECTING THE AUDIO/VIDEO SOCKETS (PLACKBACK) Camcorder Connect headphone jack to socket for personal listening For more convenient direct playback connections, the Side Audio/Video Input sockets allow for quick and easy connections, particularly Camcorder tape recordings. – Connect the VIDEO socket from the Camcorder to the Side VIDEO in socket of the TV. – Connect the AUDIO OUT sockets (Right and Left) from the Camcorder to the Side AUDIO IN sockets. VIDEO Y AV sockets on rear of TV L S-VIDEO
Resumen del contenido incluido en la página 8
CONNECTING THE AUDIO/VIDEO SOCKETS (RECORDING) Connection for recording from the TV channel VIDEO AV sockets on Y the rear of TV L S-VIDEO Pb AUDIO R Pr COMPONENT VIDEO INPUT AV2 Monitor AV1 out in in OUT OUT OUT ANTENNA VIDEO L R AUDIO IN IN IN VCR (equipped with Video and Audio input sockets) – Connect the corresponding INPUT sockets of the VCR to the MONITOR OUTPUT sockets on the rear of the TV. – To enhance the sound of your TV, connect the AUDIO L and R sockets to an external audio sys
Resumen del contenido incluido en la página 9
FUNCTIONS OF REMOTE CONTROL & Power button – Switch set off temporarily to standby mode. & (The red light indicator lights up when the set is on standby mode). é – To switch on set from standby mode, press “ Channel +/– , Digit (0 -9) or Power button. é Teletext Colour/Personal Zapping buttons ‘ – In teletext mode, the colour buttons allow you to ( access directly an item or corresponding pages. § – As Personal Zapping buttons, you can surf up to è 10 personal channels for each button. For deta
Resumen del contenido incluido en la página 10
FUNCTIONS OF REMOTE CONTROL 3 Main Index Button In teletext mode, press button to return to the main index page. 4 Frownie button Allows to delete stored personal preference channels in your Personal Preference list. For 3 detailed description of functions, refer to section on 4 “Personal Zapping ”. 5 5 Smart Picture Button Press the Smart Picture button repeatedly to 6 access 5 different types of picture settings and 7 choose your desired setting. 61Incredible Surround Button 8 – Allows you to
Resumen del contenido incluido en la página 11
➩ FUNCTIONS OF TV CONTROLS INSTALL MENU 3 7 CHANNEL 6 – VOLUME + & ‘( é “ & Mains Power button Switch mains power on or off. é Standby light indicator Indicate red light when standby mode is activated. “ Remote Sensor Acts as a sensor for activating the controls of the TV when remote control handset is aimed at it. ‘ Volume + / – buttons Adjust sound volume softer/louder. ( Channel 7 / 6 buttons Select channel in descending/ascending order. Note • You can enter the main menu by pressing both t
Resumen del contenido incluido en la página 12
SELECTING THE MENU LANGUAGE Operating instructions generally explains the operation of the TV set using the buttons on the remote control unless otherwise stated. Please read the following instructions carefully and follow the steps as shown to familiarise yourself with the installations and all features available in your set. Note: When there is no signal input to the TV, you may encounter instability of the on screen display. In this instance, please use the v button on your remote control to
Resumen del contenido incluido en la página 13
AUTOMATIC TUNING AUTOMATIC TUNING OF CHANNELS Automatic tuning of channels allows you to store each programme automatically. Step Press button Result on screen Enter main menu. Main o MENU ✔ Picture π Brightness Sound Colour Features Contrast Install Sharpness Colour Temp. More... œ Main o Press button repeatedly until Picture Language ¸ Sound Auto Store Install is selected. Features Manual Store ✔ Install π Sort Channel Edit Name œ Install o Enter install menu. ˙ ✔ Language π Englis
Resumen del contenido incluido en la página 14
MANUAL TUNING OF CHANNELS Manual tuning of channels allows you to select your preferred channel number for every available programme. Step Press button Result on screen Main o Enter main menu. MENU ✔ Picture π Brightness Sound Colour Features Contrast Install Sharpness Colour Temp. More... œ Main o Press button repeatedly until Picture Language ¸ Sound Auto Store Install is selected. Features Manual Store ✔ Install π Sort Channel Edit Name œ Install o ✔ Language π English Enter insta
Resumen del contenido incluido en la página 15
MANUAL TC UNING HANNELS OF CHANNELS Step Press button Result on screen Start manual searching. Searching Manual Store o ˙ stops once a transmitting signal is Colour System found. Sound System Search 128 MHzπ ✔ Channel Fine Tune Store œ ¸ Select Channel. Manual Store o Colour System Sound System Key in the channel number. 1 2 3 9 Search 4 Channel 2 π 5 6 ✔ Fine Tune 7 8 9 Store œ 0 Press button repeatedly until 10 ¸ Manual Storeo Store is selected. Colour System Sound Syst
Resumen del contenido incluido en la página 16
SELECTING THE COLOUR/SOUND SYSTEM This feature allows you to select your desired Colour and Sound system. If Auto is selected, the respective colour and sound system will be automatically selected according to the transmission system. Note : Select your desired colour and sound system manually if reception is poor at Auto mode. Step Press button Result on screen Repeat step 1 Colour System is selected. Manual Store o to step 5 as in Colour System Auto π ✔ “Manual Tuning Sound System Search
Resumen del contenido incluido en la página 17
FINE TUNING OF CHANNELS This feature allows you to adjust picture reception in areas of weak reception. Step Press button Result on screen Enter main menu. Main o MENU ✔ Picture π Brightness Sound Color Features Contrast Install Sharpness Colour Temp. More... œ Main o ¸ Press button repeatedly until Picture Language Sound Auto Store Install is selected. Features Manual Store ✔ Install π Sort Channel Edit Name œ Install o Enter install menu. Language Colour System ˙ Auto Store S
Resumen del contenido incluido en la página 18
SORTING OF CHANNELS This feature rearranges channel numbers. Step Press button Result on screen MENU Enter main menu. Main o Picture Language Sound Auto Store Features Manual Store ✔ Install π Sort Press button repeatedly until ¸ Channel Edit Install is selected. Name œ Install o ˙ Enter install menu. Language 000 Auto Store 001 Manual Store 002 Press button repeatedly until Sort π 003 ✔ ¸ Channel Edit 004 Sort is selected. Name 005 œ Install o Enter sort mode. ˙ Language 000
Resumen del contenido incluido en la página 19
EDITING OF CHANNELS This feature allows you to skip or edit channels which have bad or weak TV signal or channels that you do not watch often. Note : Once a channel is skipped, you cannot have access to it by the CH (Channel) + or – button. You can only have access to the channel by the Digit (0 -9) buttons. Step Press button Result on screen Enter main menu. MENU Main o Picture Language Sound Auto Store Features Manual Store Press button repeatedly until ✔ Install π Sort ¸ Channel Edit In
Resumen del contenido incluido en la página 20
NAMING OF CHANNELS This feature enables you to name or rename channels. Step Press button Result on screen MENU Enter main menu. Main o Picture Language Press button repeatedly until Sound Auto Store ¸ Features Manual Store Install is selected. ✔ Install π Sort Channel Edit Name œ Install o Enter install menu. ˙ Language 000 Auto Store 001 Manual Store 002 Press button repeatedly until Sort 003 ¸ Name is selected. Channel Edit 004 Name π 005 ✔ œ Enter name mode. Install o ˙ Lan
