Resumen del contenido incluido en la página 1
3-868-290-31 (1)
FM/AM Cassette
Car Stereo
US
Operating Instructions
ES
Manual de instrucciones
CT
®œ•Œª°©˙Æ—
For installation and connections, see the supplied installation/connections
manual.
Para obtener información sobre la instalación y las conexiones, consulte el manual
de instalación/conexiones suministrado.
ˆ©Û•ªæ˜™¶wÀ§ŒuÙs±µ°A–—®£¥£®—™°ß¶wÀ°˛uÙs±µª°©˙Æ—°®°C
XR-C2600
2000 Sony Corporation
Resumen del contenido incluido en la página 2
Welcome ! Precautions Thank you for purchasing this Sony Cassette • If your car was parked in direct sunlight Player. resulting in a considerable rise in temperature inside the car, allow the unit to cool off before In addition to the cassette playback and radio operating it. operations, you can expand your system by • If no power is being supplied to the unit, 1 connecting an optional CD/MD unit* . check the connections first. If everything is in When you operate this unit or a connected order,
Resumen del contenido incluido en la página 3
Cassettes longer than 90 minutes Notes on Cassettes The use of cassettes longer than 90 minutes is not recommended except for long continuous Cassette care play. The tape used for these cassettes is very thin and tends to stretch easily. Frequent •Do not touch the tape surface of a cassette, as playing and stopping of these tapes may cause any dirt or dust will contaminate the heads. them to become entangled in the cassette deck •Keep cassettes away from equipment with mechanism. built-in magnet
Resumen del contenido incluido en la página 4
Table of Contents This Unit Only With Optional Equipment Location of controls ................................................. 5 CD/MD Unit Playing a CD or MD ......................................... 12 Playing tracks repeatedly Getting Started — Repeat Play .............................................. 14 Resetting the unit ................................................ 6 Playing tracks in random order Detaching the front panel .................................. 6 — Shuffle Play ..........
Resumen del contenido incluido en la página 5
+ T S P R R P S T - - - + D I C S S Location of controls DIR DSPL D-BASS MENU MODE SOURCE -SEEK/AMS SOUND ENTER REP SHUF OFF 1 2 3 4 56 RELEASE XR-C2600 Refer to the pages listed for details. 1 MENU button 7, 9, 10, 11, 13 qd SEEK/AMS –/+ (cursor left/right) buttons 7, 9, 10, 11, 13 2 Volume control dial seek 10 3 SOURCE (TUNER/CD/MD) button Automatic Music Sensor 13 9, 10, 12 manual search 13 4 PRST/DISC +/– (cursor up/down) buttons qf Reset button (located on the front side 7, 9, 10, 11, 1
Resumen del contenido incluido en la página 6
Attaching the front panel Attach part A of the front panel to part B of the unit as illustrated and push the left side Getting Started into position until it clicks. Resetting the unit Before operating the unit for the first time or after replacing the car battery, you must reset the unit. Remove the front panel and press the reset A button with a pointed object, such as a ball- B point pen. Notes • Be sure not to attach the front panel upside down. Reset button • Do not press the front panel to
Resumen del contenido incluido en la página 7
4 Press either side of (PRST/DISC) to set the minute. How to use the menu This unit is operated by selecting items from a menu. To select, first enter the menu mode and 2 Press (ENTER). choose up/down (+/– of (PRST/DISC)), or choose left/right (–/+ of (SEEK/AMS)). The clock starts. (PRST/DISC) After the clock setting is complete, the (+) : To select upwards display returns to normal playback mode. (–) : To select downwards (SEEK/AMS) (–) : To select (+) : To select leftwards rightwards Setting
Resumen del contenido incluido en la página 8
Fast-winding the tape During playback, press m or M . Cassette Player Direction To advance To rewind indicator* FWD M m Listening to a tape REV m M * The < > indicator will flash while fast-winding Insert a cassette. the tape. Playback starts automatically. To start playback during fast-forwarding or rewinding, press the other fast-winding button partially until the locked button is released. Changing the display item The side facing up is played. Each time you press (DSPL), the item changes as
Resumen del contenido incluido en la página 9
Radio Reception during Radio Fast-forwarding or Rewinding of a tape — ATA (Automatic Tuner Activation) Memorizing stations When fast-forwarding or rewinding with the m or M button, the tuner will turn on automatically automatically. — Best Tuning Memory (BTM) The unit selects the stations with the strongest 1 During playback, press (MENU). signals and memorizes them in the order of their frequencies. You can store up to 6 stations on each band (FM1, FM2, FM3, AM1, and AM2). 2 Press either side o
Resumen del contenido incluido en la página 10
If you cannot tune in a preset Memorizing only the station Press either side of (SEEK/AMS) to search desired stations for the station (automatic tuning). You can preset up to 18 FM stations (6 each for Scanning stops when the unit receives a FM1, 2, and 3) and up to 12 AM stations (6 station. Press either side of (SEEK/AMS) each for AM1 and 2) in the order of your repeatedly until the desired station is choice. received. Note 1 Press (SOURCE) repeatedly to select the If the automatic tuning stop
Resumen del contenido incluido en la página 11
Changing the sound and Other Functions display settings The following items can be set: •CLOCK (page 7). •BEEP – to turn the beep sound on or off. Adjusting the sound •A.SCRL (Auto Scroll)* (page 13). •D.INFO (Dual Information) to display the characteristics clock and the play mode at the same time (ON) or to display the information You can adjust the bass, treble, balance, and alternately (OFF). fader. •M.DSPL – to turn the Motion Display on or You can store the bass and treble levels off. inde
Resumen del contenido incluido en la página 12
With Optional Equipment Boosting the bass sound CD/MD Unit — D-bass You can enjoy a clear and powerful bass sound. The D-bass function boosts the low This unit can control a maximum of ten frequency and high frequency signal with a external CD/MD units in this configuration: sharper curve than conventional bass boost. CD unit – maximum of five You can hear the bass line more clearly even MD unit – maximum of five while the vocal volume remains the same. You Any combination up to ten will work. c
Resumen del contenido incluido en la página 13
After you select the desired item, the display Locating a specific track will automatically change to the Motion — Automatic Music Sensor (AMS) Display mode after a few seconds. In the Motion Display mode, all the above During playback, press either side of items are scrolled in the display one by one in (SEEK/AMS) momentarily for each track order. you want to skip. Tip The Motion Display mode can be turned off. (See To locate To locate “Changing the sound and display settings” on preceding succ
Resumen del contenido incluido en la página 14
Additional Playing tracks repeatedly — Repeat Play Information You can select: •REP-1 – to repeat a track. •REP-2 – to repeat a disc. Maintenance During playback, press (1) (REP) Fuse Replacement repeatedly until the desired setting When replacing the fuse, be sure to use one appears. matching the amperage rating stated on the B REP-1 B REP-2 original fuse. If the fuse blows, check the REP-OFF b power connection and replace the fuse. If the fuse blows again after replacement,
Resumen del contenido incluido en la página 15
Cleaning the Connectors The unit may not function properly if the Dismounting the unit connectors between the unit and the front panel are not clean. In order to prevent this, 1 open the front panel by pressing (RELEASE), then detach it and clean the connectors with a cotton swab dipped in alcohol. Do not apply too much force. Otherwise, the connectors may be damaged. Release key (supplied) 2 Main unit 3 Back of the front panel Notes • For safety, turn off the engine before cleaning 4 the connec
Resumen del contenido incluido en la página 16
Specifications Cassette player section General Tape track 4-track 2-channel stereo Outputs Audio output Wow and flutter 0.13 % (WRMS) Power antenna relay Frequency response 30 – 15,000 Hz control lead Signal-to-noise ratio 55 dB Power amplifier control lead Telephone ATT control Tuner section lead Tone controls Bass ±8 dB at 100 Hz FM Treble ±8 dB at 10 kHz Tuning range FM tuning interval: Power requirements 12 V DC car battery 50 kHz/200 kHz (negative ground) switchable Dimensions Approx. 188 ×
Resumen del contenido incluido en la página 17
Troubleshooting guide The following checklist will help you remedy the problems you may encounter with your unit. Before going through the checklist below, check the connections and operating procedures. General Problem Cause/Solution No sound. •Set the fader control to the center position for two-speaker systems. •Rotate the dial clockwise to adjust the volume. The contents of the memory • The power cord or battery has been disconnected. have been erased. • The reset button was pressed. t Store
Resumen del contenido incluido en la página 18
Error displays (when an optional CD/MD unit is connected) The following indications will flash for about five seconds, and an alarm sound will be heard. Display Cause Solution The disc magazine is not inserted in Insert the disc magazine in the CD/ NO MAG the CD/MD unit. MD unit. No disc is inserted in the CD/MD unit. Insert discs in the CD/MD unit. NO DISC A CD/MD cannot play because of Insert another CD/MD. NG DISCS some problem. A CD is dirty or inserted upside Clean or insert the CD correctl
Resumen del contenido incluido en la página 19
19
Resumen del contenido incluido en la página 20
¡Bienvenido! Precauciones Gracias por adquirir este reproductor de •Si aparca el automóvil bajo la luz solar cassettes de Sony. directa y se produce un considerable aumento de temperatura en su interior, deje Además de las operaciones de reproducción de que la unidad se enfríe antes de utilizarla. cassettes y de la radio, es posible ampliar el •Si la unidad no recibe alimentación, 1 sistema mediante la conexión de una unidad* compruebe las conexiones en primer lugar. Si de CD/MD opcional. todo e
