Resumen del contenido incluido en la página 1
3-047-809-11 (1)
FM/AM Cassette
Car Stereo
US
Operating Instructions
Owner’s Record
The model and serial numbers are located on the bottom of the unit.
Record the serial number in the space provided below.
Refer to these numbers whenever you call upon your Sony dealer regarding this
product.
Model No. XR-C7350X Serial No.
For installation and connections, see the supplied installation/connections
manual.
XR-C7350X
2000 Sony Corporation
Resumen del contenido incluido en la página 2
Warning Welcome ! This equipment has been tested and found to Thank you for purchasing this Sony Cassette comply with the limits for a Class B digital Player. This unit lets you enjoy a variety of device, pursuant to Part 15 of the FCC Rules. features using the following controller These limits are designed to provide accessory: reasonable protection against harmful Optional accessory interference in a residential installation. This Rotary commander RM-X4S equipment generates, uses, and can radi
Resumen del contenido incluido en la página 3
Precautions Notes on Cassettes •If your car was parked in direct sunlight Cassette care resulting in a considerable rise in •Do not touch the tape surface of a cassette, as temperature inside the car, allow the unit to any dirt or dust will contaminate the heads. cool off before operating it. •Keep cassettes away from equipment with •If no power is being supplied to the unit, built-in magnets such as speakers and check the connections first. If everything is in amplifiers, as erasure or distorti
Resumen del contenido incluido en la página 4
Table of Contents With Optional Equipment This Unit Only Location of controls ................................................. 5 CD/MD Unit Playing a CD or MD ......................................... 16 Getting Started Playing tracks repeatedly — Repeat Play .............................................. 18 Resetting the unit ................................................ 7 Playing tracks in random order Detaching the front panel .................................. 7 — Shuffle Play ..........
Resumen del contenido incluido en la página 5
+ T S P R R P S T - + D I C S S Location of controls OPEN DSPL D-BASS MENU MODE SOURCE -SEEK/AMS SOUND ENTER REP SHUF 1 2 3 4 56 OFF XR-C7350X Refer to the pages listed for details. 1 MENU button qa SOUND button 15 8, 10, 11, 12, 15, 17, 19 qs OFF button* 6, 7, 8, 9 2 Volume control dial qd Reset button (located on the front side 3 SOURCE (TUNER/TAPE/CD/MD/TV) of the unit behind the front panel) 7 button 6, 8, 9, 11, 12, 16, 18, 19, 20 qf SEEK/AMS –/+ (cursor left/right) buttons 4 PRST/DISC
Resumen del contenido incluido en la página 6
Optional Card remote commander RM-X91 The corresponding buttons of the card remote commander control the same OPEN/CLOSE functions as those on this unit. OFF 1 OFF button 2 MENU button MENU DISC LIST 3 SOURCE button SEEK SEEK SOURCE 4 SEEK/AMS (cursor
Resumen del contenido incluido en la página 7
Attaching the front panel Place the hole A of the front panel onto the spindle B on the unit as illustrated, then push Getting Started the left side in. A Resetting the unit B Before operating the unit for the first time or after replacing the car battery, you must reset the unit. Remove the front panel and press the reset button with a pointed object, such as a ball- point pen. Reset button x Note Pressing the reset button will erase the clock setting, preset memory and some memorized functions
Resumen del contenido incluido en la página 8
Turning the unit on/off Setting the clock The clock uses a 12-hour digital indication. Turning on the unit Press (SOURCE) or insert a cassette in the unit. Example: To set the clock to 10:08 For details on operation, refer to page 9 (cassette player) and page 11 (radio). 1 Press (MENU), then press either side of (PRST/DISC) repeatedly until “CLOCK” Turning off the unit appears. Press (OFF) to stop tape playback or FM/AM reception (the key illumination and display remains on.) Press (OFF) for two
Resumen del contenido incluido en la página 9
Fast-winding the tape During playback, press and hold either Cassette Player side of (SEEK/AMS). Listening to a tape Rewind Fast-forward 1 Press (OPEN) and insert a cassette. Playback starts automatically. To start playback during fast-forwarding or rewinding, press (MODE) (o). Locating a specific track — Automatic Music Sensor (AMS) During playback, press either side of (SEEK/AMS) momentarily for each track you want to skip. 2 Close the front panel. You can skip up to nine tracks at one time. I
Resumen del contenido incluido en la página 10
Playing tracks repeatedly Playing a tape in various — Repeat Play During playback, press (1) (REP) modes repeatedly until “REP-ON” in the display You can play the tape in various modes: appears. •REP (Repeat Play) repeats the current track. REP-ON y REP-OFF DSPL •NR (Dolby NR) lets you select the Dolby* NR MODE B system. •METAL (Metal) lets you play a metal or CrO2 -SEEK/AMS tape. ENTER •BL SKP (Blank Skip) skips blanks longer than REP SHUF 1 2 3 4 56 eight seconds. •ATA (Automatic Tuner Activat
Resumen del contenido incluido en la página 11
Memorizing only the Radio desired stations You can preset up to 18 FM stations (6 each for FM1, 2, and 3) and up to 12 AM stations (6 each for AM1 and 2) in the order of your Memorizing stations choice. automatically 1 Press (SOURCE) repeatedly to select the — Best Tuning Memory (BTM) tuner. The unit selects the stations with the strongest signals and memorizes them in the order of 2 Press (MODE) repeatedly to select the their frequencies. You can store up to 6 stations band. on each band (FM1,
Resumen del contenido incluido en la página 12
If FM stereo reception is poor Receiving the memorized — Monaural Mode 1 During radio reception, press (MENU), stations then press either side of (PRST/DISC) repeatedly until “MONO” appears. 1 Press (SOURCE) repeatedly to select the tuner. 2 Press (+) side of (SEEK/AMS) until “MONO-ON“ appears. 2 Press (MODE) repeatedly to select the The sound improves, but becomes band. monaural (“ST” disappears). 3 Press the number button ((1) to (6)) on 3 Press (ENTER). which the desired station is stored. To
Resumen del contenido incluido en la página 13
DSPL MODE SOUND Using the rotary Other Functions commander The rotary commander works by pressing You can also control this unit with the rotary buttons and/or rotating controls. commander (optional). You can also control the optional CD or MD units with the rotary commander. By pressing buttons Labeling the rotary (the SOURCE and MODE buttons) commander Depending on how you mount the rotary commander, attach the appropriate label as shown in the illustration below. (SOURCE) (MODE) GB Each time
Resumen del contenido incluido en la página 14
By rotating the control (the SEEK/AMS control) Press (SOUND) to adjust the volume and sound menu. Press (DSPL) to change the displayed items. Tip While the ATA function is activated, the display (TAPE y TUNER) can be changed by pressing (DSPL). Rotate the control and release it to: •Locate the beginnings of tracks on the Changing the operative direction tape. Rotate and hold the control, and The operative direction of controls is factory- release it to fast-wind the tape. To start set as shown b
Resumen del contenido incluido en la página 15
Adjusting the sound Changing the sound and characteristics display settings You can adjust the bass, treble, balance, and The following items can be set: fader. •CLOCK (page 8). You can store the bass and treble levels •BEEP – to turn the beep sound on or off. independently for each source. •RM (Rotary Commander) – to change the operative direction of the rotary commander. — Select “NORM” to use the rotary 1 Select the item you want to adjust by commander as the factory-set position. pressing (S
Resumen del contenido incluido en la página 16
With Optional Equipment Boosting the bass sound CD/MD Unit — D-bass You can enjoy a clear and powerful bass sound. The D-bass function boosts the low This unit can control external CD/MD units. frequency signal and high frequency signal If you connect an optional CD unit with the with a sharper curve than conventional bass CD TEXT function, the CD TEXT information boost. will appear in the display when you play a CD You can hear the bass line more clearly even TEXT disc. while the vocal volume r
Resumen del contenido incluido en la página 17
After you select the desired item, the display Locating a specific track will automatically change to the Motion — Automatic Music Sensor (AMS) Display mode after a few seconds. In the Motion Display mode, all the items are During playback, press either side of scrolled in the display one by one in order. (SEEK/AMS) momentarily for each track you want to skip. Tip The Motion Display mode can be turned off. (See “Changing the sound and display settings” on page 15.) To locate To locate Automatica
Resumen del contenido incluido en la página 18
Playing tracks repeatedly TV/Video — Repeat Play You can select: •REP-1 – to repeat a track. You can connect an optional TV tuner and TV •REP-2 – to repeat a disc. monitor to this unit. During playback, press (1) (REP) repeatedly until the desired setting Watching the TV appears. B REP-1 B REP-2 1 Press (SOURCE) repeatedly until “TV” REP-OFF b appears. Repeat Play starts. 2 Press either side of (PRST/DISC) repeatedly to select the desired TV band. To return to normal playback
Resumen del contenido incluido en la página 19
Memorizing TV channels Memorizing only the automatically desired TV channels The unit selects the TV channels with the You can store up to 12 channels (6 each for strongest signals and memorizes them in the TV1 and 2) on the number buttons in the order order of their frequency. of your choice. Caution 1 Press (SOURCE) repeatedly until “TV” When tuning in a station while driving, use appears. Best Tuning Memory to prevent accidents. 2 Press either side of (SEEK/AMS) to tune 1 Press (SOURCE) repea
Resumen del contenido incluido en la página 20
4 Press (SOURCE) repeatedly to select CD Additional or MD. Information 5 Press (+) side of (SEEK/AMS). Maintenance Fuse replacement When replacing the fuse, be sure to use one matching the amperage rating stated on the original fuse. If the fuse blows, check the 6 Press (SOURCE) repeatedly until “TV” power connection and replace the fuse. If the appears, then press (MODE) repeatedly fuse blows again after replacement, there may to select a TV or video. be an internal malfunction. In such a case,
