Resumen del contenido incluido en la página 1
Video Cassette Recorder
VRB664AT
Owner’s Manual
Important!
Return your Warranty Registration
Card within 10 days. See why inside.
Resumen del contenido incluido en la página 2
1 N I H T I W D E D E E N N Return your Warranty Registration card today to ensure you receive all the you’re entitled to. benefits Once your PHILIPS purchase is registered, you’re eligible to receive all the privileges of owning a PHILIPS product. So complete and return the Warranty Registration Card enclosed with your purchase at once. And take advantage of these important benefits. Warranty Owner Model Verification Confirmation Registration Registering your product within Your completed Warra
Resumen del contenido incluido en la página 3
Introduction 3 Welcome to your VCR owner’s manual. This manual has seven sections: Setting Up Your VCR; Description of Controls; Basic Operations; Recording Options; Playing Options; Additional Features; and Information You May Need. The instructions explain all of the VCR’s features, which are listed below. You cannot hurt your VCR by trying the features! So read on – and relax. Features • On-Screen Displays in English or Spanish • Auto DBS RecordLink™ • One-Touch Recording • Automatic Channel
Resumen del contenido incluido en la página 4
4 Table of Contents Setting Up Your VCR Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3 Table of Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4 Before Using Your VCR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Resumen del contenido incluido en la página 5
Before Using Your VCR 5 Removing the Plastic Cover from the Front Panel A thin, plastic cover may protect the front panel of your VCR. Before using the VCR, lift a corner of the plastic, then peel it off. Putting Batteries in the Remote Control 1 1 Remove the battery compartment lid on the bottom of the remote control by pressing the tab, then lifting the lid. 2 Place two AA batteries inside the battery compartment 2 with their and ends aligned as indicated. + – 3 Replace the battery compartmen
Resumen del contenido incluido en la página 6
75 ANT / CABLE 6 Hookups Without a Cable Box/Direct Broadcast System The basic VCR/TV connection – antenna/cable to VCR to TV – is shown below. If you have a Cable Box or a Direct Broadcast System, please see pages eight-nine. If you have a Stereo TV, please see page 10. After you hook up the VCR, go to page 11 to turn on the VCR. 1 Disconnect the antenna or cable from your TV. Antenna Indoor/Outdoor (300 ohm) 75 ANT / CABLE OR ANTENNA IN Jack (on back of TV) Cable (75 ohm) 2 Connect the
Resumen del contenido incluido en la página 7
75 ANT / CABLE Hookups Without a Cable Box/Direct Broadcast System (cont’d) 7 3 Connect the RF coaxial cable (supplied) to the OUT Jack on the back of the VCR and to the ANTENNA IN Jack on the TV. (You may use either a snap-on type (supplied) or screw-on type of coaxial cable, whichever you prefer.) ANT AUDIO IN L OUT IN R Antenna VIDEO OUT CH3 CH4 OUT IN ANT or Cable AUDIO IN L 75 ANT / IN CABLE OUT R OUT VIDEO ANTENNA IN Jack (on back of TV) CH3 CH4 IN OUT example only RF coaxial cable
Resumen del contenido incluido en la página 8
75 ANT / CABLE 8 Hookups With a Cable Box/Direct Broadcast System There are two ways to connect your Cable Box/DBS to the VCR. With this connection: l You may view any channel. l You must select channels at the Cable Box/DBS. Channels cannot be changed at the VCR. l You may not view a channel other than the one you are recording. l You may not program channels at the VCR. l You can only program a timer recording for one channel at a time. Set the TV and the VCR to the Cable Box/DBS output ch
Resumen del contenido incluido en la página 9
75 ANT / CABLE IN OUT Hookups With a Cable Box/Direct Broadcast System (cont’d) 9 With this connection: l You may watch one channel while recording another. l You may not record scrambled channels. VCR 1 Cable Box/DBS 2 AUDIO ANT IN L OUT IN R VIDEO OUT CH3 CH4 OUT IN RF coaxial Cable cable Signal TV’s ANTENNA RF coaxial IN Jack 3 cable Connections 1 Connect a Cable signal to the VCR’s ANT(enna) IN Jack. 2 Use an RF coaxial cable (supplied) to connect the OUT Jack on the VCR to the IN Jack o
Resumen del contenido incluido en la página 10
10 Hookups With a Stereo TV antenna or cable to 1 ANT(enna) ANT AUDIO IN IN Jack L IN OUT R VIDEO OUT CH3 CH4 OUT IN Audio and Video IN Jacks on TV VIDEO (yellow) and AUDIO (red and white) OUT Jacks Video Cable 2 Audio Cable 3 l Audio and Video cables are not supplied. 1 Connect the antenna or cable to the ANT(enna) IN Jack on the back of the VCR. 2 Connect a video cable to the yellow VIDEO OUT Jack on the back of the VCR. Then, connect the other end of the video cable to the VIDEO IN Jack on
Resumen del contenido incluido en la página 11
MENU Turning on Your VCR 11 Before turning on your VCR, make sure batteries are in the Turn on the TV. remote control and the VCR and TV are connected correctly. 2 l Follow the steps on this page only when you plug the VCR power cord into the wall outlet for the first time. POWER EJECT l You can not program channels if you are using a Cable Box or a Direct Broadcast System. 1 VCR/TV SPEED MEMORY l If you are not using a Cable Box/DBS, the clock may set itself REC/OTR PAUSE/STILL automatically
Resumen del contenido incluido en la página 12
MENU 12 Automatic Channel Setup Although your VCR may automatically memorize the channels you receive when you turn it on for the first time, this function lets 3-4 you set up the channels again. POWER EJECT 1 VCR/TV SPEED MEMORY Press the VCR button. REC/OTR PAUSE/STILL PLAY 2 REW F.FWD Press the MENU button. STOP STATUS/EXIT SELECT op CHOOSE B fi PROGRAM 2 VCR SET UP TUNER SET UP SET CLOCK 1 2 3 AUTO DBS OFF RECORD LINK CH. TO END PUSH EXIT 4 5 6 7 8 9 MUTE ALT.CH 3 0 VOL. VCR TV CBL/DBS Press
Resumen del contenido incluido en la página 13
MENU Automatic Channel Setup (cont’d) 13 Adding/Deleting Channels 3-6 1 POWER EJECT Press the VCR button. VCR/TV SPEED MEMORY REC/OTR PAUSE/STILL 2 Press the MENU button. PLAY REW F.FWD STOP 3 Press the PLAY/o button or the STOP/p button to select STATUS/EXIT TUNER SET UP, then press the F.FWD/B button. 2 7 1 2 3 4 CH. 4 5 6 Press the PLAY/o button or the STOP/p button to select ADD/DELETE CH, then press the F.FWD/B button. 7 8 9 SELECT op ADD/DELETE B ALT.CH MUTE 0 VOL. 124 DELETED VCR TV CBL/
Resumen del contenido incluido en la página 14
MENU 14 Automatic Channel Setup (cont’d) Reviewing Memorized Channels 1 3-4 Press the VCR button. POWER EJECT VCR/TV SPEED MEMORY 2 Press the MENU button. REC/OTR PAUSE/STILL SELECT op CHOOSE B PLAY fi PROGRAM VCR SET UP REW F.FWD TUNER SET UP SET CLOCK STOP AUTO DBS OFF RECORD LINK STATUS/EXIT TO END PUSH EXIT 2 5 1 2 3 3 CH. 4 5 6 Press the PLAY/o button or the STOP/p button to select TUNER SET UP, then press the F.FWD/B button. 7 8 9 SELECT op CHOOSE B MUTE 0 ALT.CH fi AUTO PROGRAMMING VOL. AD
Resumen del contenido incluido en la página 15
MENU Setting the Clock 15 There are two ways to set the clock. With manual clock setting, you tell the VCR the current time. With automatic clock setting, the VCR gets the current time from your local PBS station. It 3-4 keeps track of the time by constantly referring to the time broad- casted by your PBS station. POWER EJECT If you are using a Cable Box or Direct Broadcast System, VCR/TV SPEED MEMORY you must set the clock manually. Follow the instructions under either manual clock setting or
Resumen del contenido incluido en la página 16
MENU 16 Setting the Clock (cont’d) 5 Press two Number buttons for the hour(s) and two Number buttons for the minute(s). Then press 1 for AM or 2 for PM. For example, for 2:15 PM, press 02, 15, 2. POWER EJECT l Enter a 0 before a single-digit number. VCR/TV SPEED MEMORY l Entries that do not match the VCR’s internal calendar or clock will cause a question mark (?) to appear on the screen. REC/OTR PAUSE/STILL l To make corrections, press the CLEAR button until the space for the number you want to
Resumen del contenido incluido en la página 17
MENU Setting the Clock (cont’d) 17 Automatic Clock Setting 2-4 POWER EJECT 1 Press the VCR button, then press the MENU button. 4 VCR/TV SPEED MEMORY SELECT op CHOOSE B REC/OTR PAUSE/STILL fi PROGRAM VCR SET UP TUNER SET UP SET CLOCK PLAY AUTO DBS OFF RECORD LINK REW F.FWD 3 TO END PUSH EXIT STOP STATUS/EXIT 1 2 4 Press the PLAY/o button or the STOP/p button to select 1 2 3 SET CLOCK, then press the F.FWD/B button. CH. 4 5 6 7 8 9 3 If OFF appears to the right of AUTO CLOCK, press the MUTE 0 ALT.
Resumen del contenido incluido en la página 18
MENU 18 Setting the Clock (cont’d) Time Zone When using the AUTO CLOCK function, you can specify your time zone. That way, the VCR will update the clock according to 2-4 your time zone. POWER EJECT 1 VCR/TV SPEED MEMORY Press the VCR button, then press the MENU button. REC/OTR PAUSE/STILL SELECT op CHOOSE B fi PROGRAM VCR SET UP PLAY TUNER SET UP SET CLOCK REW F.FWD AUTO DBS OFF RECORD LINK STOP TO END PUSH EXIT STATUS/EXIT 1 5 2 1 2 3 Press the PLAY/o button or the STOP/p button to select CH. 4
Resumen del contenido incluido en la página 19
MENU Daylight-Savings Time 19 You may program the VCR so its clock will automatically move forward one hour in April and turn back one hour in October. 3-4 Daylight-Savings Time is set to ON when you receive your VCR. Turn Daylight-Savings Time ON or OFF by following the steps POWER EJECT below. Before you begin: l Make sure the clock is set. VCR/TV SPEED MEMORY REC/OTR PAUSE/STILL 1 PLAY Press the VCR button. REW F.FWD STOP 2 STATUS/EXIT Press the MENU button. 2 SELECT op CHOOSE B 5 fi PROGRAM
Resumen del contenido incluido en la página 20
MENU 20 Language Selection Follow the steps below to change the language of the on-screen displays and menus. 3-5 1 Press the VCR button. POWER EJECT VCR/TV SPEED MEMORY 2 REC/OTR PAUSE/STILL Press the MENU button. PLAY SELECT op CHOOSE B REW F.FWD fi PROGRAM VCR SET UP STOP TUNER SET UP SET CLOCK AUTO DBS OFF STATUS/EXIT RECORD LINK TO END PUSH EXIT 2 6 1 2 3 CH. 3 4 5 6 Press the PLAY/o button or the STOP/p button to select 7 8 9 VCR SET UP, then press the F.FWD/B button. SELECT op CHOOSE B MU
