Resumen del contenido incluido en la página 1
SVZ142.comb 4/7/99 6:30 PM Page 1
Video
Cassette
Recorder
Owner’s Manual
MODEL SVZ142
Resumen del contenido incluido en la página 2
N I H T I W D E D E E N N O I SVZ142.comb 4/7/99 6:30 PM Page 2 Return your Warranty Registration Card today to ensure you receive all the you’re entitled to. benefits Once your purchase is registered, you’re eligible to receive all the privileges of owning this prod- uct. So complete and return the Warranty Registration Card enclosed with your purchase at once. And take advantage of these important benefits. Warranty Owner Model Verification Confirmation Registration Registering your product
Resumen del contenido incluido en la página 3
SVZ142.comb 4/7/99 6:30 PM Page 3 Introduction 3 Welcome to your VCR owner’s manual. This manual has six sections: Setting Up Your VCR; Description of Controls; Basic Operations; Recording; Playing; and Information You May Need. The instructions explain all of the VCR’s features, which are listed below. You cannot hurt your VCR by trying the features! So read on – and relax. Features • Auto Return • Auto Satellite Link • Automatic Channel Setup • Automatic Playback Features • Automatic Track
Resumen del contenido incluido en la página 4
SVZ142.comb 4/7/99 6:30 PM Page 4 4 Table of Contents Setting Up Your VCR Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3 Table of Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4 Before Using Your VCR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5 Hookups Without a Cable Box/Direct Broadcast
Resumen del contenido incluido en la página 5
SVZ142.comb 4/7/99 6:30 PM Page 5 Before Using Your VCR 5 Putting Batteries in the Remote Control 1 1 Remove the battery compartment lid on the bottom of the remote control by sliding the lid in the direction of the arrow. 2 2 Insert two AA batteries inside the battery compartment with their and – ends aligned as indicated. + 3 Replace the battery compartment lid. 3 Using the Remote Control l Point the remote control at the VCR’s remote sensor (see page 21) when using the remote control to op
Resumen del contenido incluido en la página 6
SVZ142.comb 4/7/99 6:30 PM Page 6 6 Hookups Without a Cable Box/Direct Broadcast System The basic VCR/TV connection – antenna/cable to VCR to TV – is shown below. If you have a Cable Box or Direct Broadcast System, please refer to pages eight - nine. If you have a Stereo TV, please go to page 10. After you hook up the VCR, please go to page 11 to turn on the VCR. 1 Disconnect the antenna or cable from your TV. Antenna Indoor/Outdoor (300 ohm) 75V ANT / CABLE OR Antenna In Jack (on back of TV)
Resumen del contenido incluido en la página 7
75V ANT / CABLE SVZ142.comb 4/7/99 6:30 PM Page 7 Hookups Without a Cable Box/Direct Broadcast System (cont’d) 7 3 Connect the RF coaxial cable (supplied) to the OUT jack on the back of the VCR and to the ANTENNA IN Jack on the TV. (You may use either a snap-on type or screw-on type of coaxial cable, whichever you prefer. A snap-on type is sup- plied.) Antenna ANT IN AUDIO or Cable OUT IN OUT CH3 CH4 VIDEO ANT IN 75V ANT / CABLE AUDIO OUT IN OUT Antenna In Jack CH3 CH4 VIDEO (on back of TV)
Resumen del contenido incluido en la página 8
75V ANT / CABLE SVZ142.comb 4/7/99 6:30 PM Page 8 8 Hookups With a Cable Box This connection allows you to view any channel. After you connect the Cable Box, VCR, and TV as shown below, the features described on this page will be available. 3. Use a second RF 1. Connect a Cable signal to coaxial cable to con- the IN Jack on the Cable Box. nect the OUT jack on the VCR to the TV’s IN ANTENNA IN Jack. OUT ANT IN AUDIO OUT IN OUT CH3 CH4 VIDEO 2. Use an RF coaxial cable (supplied) to ANTENNA IN J
Resumen del contenido incluido en la página 9
OUT IN SVZ142.comb 4/7/99 6:30 PM Page 9 Hookups With a Cable Box (cont’d) 9 This connection allows you to program an unattended recording of more than one unscram- bled channel and to watch one channel while recording another. After you connect the VCR, Cable Box, and TV as shown below, the features on this page will be available. 1. Connect a Cable 2. Use an RF coaxial cable (supplied) to connect signal to the VCR’s the OUT Jack on the VCR to the IN Jack on the ANT(enna) IN Jack. Cable Box.
Resumen del contenido incluido en la página 10
SVZ142.comb 4/7/99 6:30 PM Page 10 10 Hookups With a Stereo TV antenna or cable to 1 ANT(enna) IN Jack ANT IN AUDIO OUT IN OUT CH3 CH4 VIDEO Audio and Video VIDEO (yellow) and IN Jacks on TV AUDIO (white) OUT Jacks Video Cable 2 Audio Cable 3 l Audio and Video cables are not supplied. 1 Connect the antenna or cable to the ANT(enna) IN Jack on the back of the VCR. 2 Connect a video cable to the yellow VIDEO OUT Jack on the back of the VCR. Then, connect the other end of the video cable to the
Resumen del contenido incluido en la página 11
SVZ142.comb 4/7/99 6:30 PM Page 11 Turning on Your VCR 11 l Before turning on your VCR, make sure there are batteries in Turn on the TV. the remote control and the VCR and TV are connected (see pages five - 10). 2 l You can not set up channels if you are using a Cable Box/DBS. l The instructions on this page only work when you turn on the VCR for the first time. If there is a power failure or if the VCR is unplugged for more than one minute, you may need to repeat the instructions on this pag
Resumen del contenido incluido en la página 12
SVZ142.comb 4/7/99 6:30 PM Page 12 12 Automatic Channel Setup Although your VCR may automatically set up the channels you receive when you turn it on for the first time, this function lets you set up channels again. Make sure: l The VCR is on and is in VCR position. (The VCR/TV light will appear on the display panel. If it does not, press the VCR/TV button once.) 1 Press the MENU button repeatedly until the INITIALIZE menu appears. INITIALIZE POWER VCR/TV EJECT fi CHANNEL SET UP SETTING CLOCK
Resumen del contenido incluido en la página 13
SVZ142.comb 4/7/99 6:30 PM Page 13 Automatic Channel Setup (cont’d) 13 Adding/Deleting Channels The channels you no longer receive or seldom watch can be deleted from the memory. You also may add new channels into the memory. Make sure: l The VCR is on and in VCR position. (The VCR/TV light will appear. If it does not, press the VCR/TV button once.) 1 Press the MENU button repeatedly until the INITIALIZE menu appears. POWER VCR/TV EJECT 2 1 2 3 Press the PLAY button or the STOP button repeat
Resumen del contenido incluido en la página 14
SVZ142.comb 4/7/99 6:30 PM Page 14 14 Setting the Clock Follow the steps below to set your VCR’s clock. Make sure: l The VCR is on and in VCR position. (The VCR/TV light will appear. If it does not, press the VCR/TV button once.) 1 Press the MENU button repeatedly until the INITIALIZE menu appears. POWER VCR/TV EJECT 1 2 3 2 4 5 6 Press the PLAY button or the STOP button repeatedly to select SETTING CLOCK. Then, press the F.FWD button. CHANNEL 7 8 9 SETTING CLOCK 0 +100 SPEED MONTH DAY
Resumen del contenido incluido en la página 15
SVZ142.comb 4/7/99 6:30 PM Page 15 Setting the Clock (cont’d) 15 6 While the HOUR space is flashing, press the PLAY button or the STOP button repeatedly until the desired hour appears. Then, press the F.FWD button. SETTING CLOCK MONTH DAY YEAR 0 3 / 0 1 SUN 1 9 9 8 HOUR MINUTE AM/PM 0 5 : – – – – POWER VCR/TV EJECT 7 1 2 3 While the MINUTE space is flashing, press the PLAY but- 4 5 6 ton or the STOP button repeatedly until the desired minute a
Resumen del contenido incluido en la página 16
SVZ142.comb 4/7/99 6:30 PM Page 16 16 Language Selection Follow the steps below to change the language of the on-screen menus and displays. Make sure: l The VCR is on and in VCR position. (The VCR/TV light will appear. If it does not, press the VCR/TV button once.) 1 Press the MENU button repeatedly until the INITIALIZE menu appears. INITIALIZE fi CHANNEL SET UP POWER VCR/TV EJECT SETTING CLOCK LANGUAGE SELECT 1 2 3 4 5 6 CHANNEL 7 8 9 2 Press the PLAY button or the STOP button repeatedly to 0
Resumen del contenido incluido en la página 17
SVZ142.comb 4/7/99 6:30 PM Page 17 On-Screen Status Displays 17 You may access on-screen status displays by pressing the DISPLAY button repeatedly. On-screen status displays may include the current time, channel, and other information. l Press the DISPLAY button once. The COUNT on-screen status display will appear for five seconds. After five seconds, only the real-time counter will appear on-screen. This counter shows you the elapsed play- ing time of the tape (from the point at which the re
Resumen del contenido incluido en la página 18
SVZ142.comb 4/7/99 6:30 PM Page 18 18 Remote Control Buttons POWER Button Press to turn the VCR on or off. Number Buttons Use to select channels. Channels 1 - 9 l To select, press 0, then press the channel number you want. For example, to select channel 7, press 0, 7. Channels 100 and above l To select, press the +100 button, then press the last two digits of the channel you want. For example, to select channel 117, press the +100 button, 1, 7. POWER VCR/TV EJECT 1 2 3 SPEED Button 4 5 6
Resumen del contenido incluido en la página 19
SVZ142.comb 4/7/99 6:30 PM Page 19 Remote Control Buttons (cont’d) 19 EJECT Button Press to eject the tape. VCR/TV Button Use to select the signal that your TV receives. l VCR Position Use to watch a tape, to watch a program while recording it, or to watch a TV broadcast using the CHANNEL o/p or Number buttons. l TV Position Use to watch TV or to watch one program while recording anoth- er. Details are on page 32. POWER VCR/TV EJECT CHANNEL o/p Buttons 1 2 3 Press to scan up or down through t
Resumen del contenido incluido en la página 20
SVZ142.comb 4/7/99 6:30 PM Page 20 20 VCR Display Panel VCR Display Panel Information about VCR opera- tions is displayed here. Cassette Compartment Insert a video cassette tape here. PLAY REW F FWD STOP EJECT REC/OTR PAUSE POWER VCR/TV POWER VCR/TV CST. IN TIMER REC CHANNEL POWER VCR/TV CST. IN TIMER REC CHANNEL POWER VCR/TV REC(ord) Light POWER Light This light appears during a recording. It This light indicates that the power flashes when a recording is paused. is on. TIMER Light This lig
