Resumen del contenido incluido en la página 1
Video
Cassette
Recorder
Owner’s Manual
MODEL SVB106
Resumen del contenido incluido en la página 2
Return your Warranty Registration Card today to ensure you receive all the you’re entitled to. benefits Once your purchase is registered, you’re eligible to receive all the privileges of owning this prod- uct. So complete and return the Warranty Registration Card enclosed with your purchase at once. And take advantage of these important benefits. Warranty Owner Model Verification Confirmation Registration Registering your product within Your completed Warranty Returning your Warranty 10 days con
Resumen del contenido incluido en la página 3
Introduction 3 Welcome to your VCR owner’s manual. This manual has seven sections: Setting Up Your VCR; Description of Controls; Basic Operations; Recording; Playing; Additional Features; and Information You May Need. The instructions explain all of the VCR’s features, which are listed below. You cannot hurt your VCR by trying the features! So read on – and relax. Features • Auto Satellite Link • One-Touch Recording • Automatic Channel Setup • Picture Select • Automatic Head Cleaner • Real-Tim
Resumen del contenido incluido en la página 4
4 Table of Contents Setting Up Your VCR Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3 Table of Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4 Before Using Your VCR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5 Hookups Without a Cable Box/Direct Broadcast System . . . . . . . . . . . . . . .
Resumen del contenido incluido en la página 5
Before Using Your VCR 5 Putting Batteries in the Remote Control 1 1 Remove the battery compartment lid on the bottom of the remote control by sliding the lid in the direction of the arrow. 2 2 Insert two AA batteries inside the battery compartment with their and – ends aligned as indicated. + 3 Replace the battery compartment lid. 3 Using the Remote Control l Point the remote control at the VCR’s remote sensor (see page 21) when using the remote control to operate the VCR. l Do not put objects
Resumen del contenido incluido en la página 6
6 Hookups Without a Cable Box/Direct Broadcast System The basic VCR/TV connection – antenna/cable to VCR to TV – is shown below. If you have a Cable Box or a Direct Broadcast System, please see pages eight-nine. If you have a Stereo TV, please see page 10. After you hook up the VCR, go to page 11 to turn on the VCR. 1 Disconnect the antenna or cable from your TV. Antenna Indoor/Outdoor (300 ohm) ANTENNA IN Jack (on back of TV) Cable (75 ohm) 2 Connect the antenna or cable to the ANT(enna) IN J
Resumen del contenido incluido en la página 7
Hookups Without a Cable Box/Direct Broadcast System (cont’d) 7 3 Connect the RF coaxial cable (supplied) to the OUT Jack on the back of the VCR and to the ANTENNA IN Jack on the TV. (You may use either a snap-on type (supplied) or screw-on type of coaxial cable, whichever you prefer.) Antenna or Cable ANTENNA IN Jack (on back of TV) example only RF coaxial cable 4 Plug in the AC power cords of the TV and the VCR. 5 Set the CH3/CH4 switch on the back of the VCR to CH3 or CH4, whichever channel i
Resumen del contenido incluido en la página 8
8 Hookups With a Cable Box/Direct Broadcast System There are two ways to connect your Cable Box/DBS to the VCR. With this connection: l You may view any channel. l You must select channels at the Cable Box/DBS. Channels cannot be changed at the VCR. l You may not view a channel other than the one you are recording. l You may not program channels at the VCR. l You can only program a timer recording for one channel at a time. Set the TV and the VCR to the Cable Box/DBS output channel (channel 03
Resumen del contenido incluido en la página 9
Hookups With a Cable Box/Direct Broadcast System (cont’d) 9 With this connection: l You may watch one channel while recording another. l You may not record scrambled channels. VCR 1 Cable Box/DBS 2 RF coaxial Cable cable Signal TV’s ANTENNA RF coaxial IN Jack 3 cable Connections 1 Connect a Cable signal to the VCR’s ANT(enna) IN Jack. 2 Use an RF coaxial cable (supplied) to connect the OUT Jack on the VCR to the IN Jack on the Cable Box/DBS. 3 Use a second RF coaxial cable to connect the OUT Ja
Resumen del contenido incluido en la página 10
10 Hookups With a Stereo TV antenna or cable to 1 ANT(enna) IN Jack Audio and Video IN Jacks on TV VIDEO (yellow) and AUDIO (red and white) Video Cable 2 OUT Jacks Audio Cable 3 l Audio and Video cables are not supplied. 1 Connect the antenna or cable to the ANT(enna) IN Jack on the back of the VCR. 2 Connect a video cable to the yellow VIDEO OUT Jack on the back of the VCR. Then, connect the other end of the video cable to the VIDEO IN Jack on your TV. 3 Connect an audio cable to the red and w
Resumen del contenido incluido en la página 11
Turning on Your VCR 11 l Before turning on your VCR, make sure there are batteries in Turn on the TV. the remote control and the VCR and TV are connected (see pages five-10). 2 l You can not set up channels if you are using a Cable Box/DBS. l The instructions on this page only work when you turn on the VCR for the first time. If there is a power failure or if the VCR is unplugged for more than one minute, you may need to repeat the instructions on this page. 1 1 Press the POWER button. The POWE
Resumen del contenido incluido en la página 12
12 Automatic Channel Setup Although your VCR may automatically set up the channels you receive when you turn it on for the first time, this function lets you set up channels again. Make sure: l The VCR is on and is in VCR position. (The VCR/TV light will appear on the display panel. If it does not, press the VCR/TV button once.) 1 Press the MENU button until MENU 1 appears. - M E N U 1 - B TIMER PROGRAMMING AUTO REPEAT [OFF] PICTURE SELECT CHANNEL SET UP CLOCK SET LANGUAGE SELECT AUTO SATELLITE
Resumen del contenido incluido en la página 13
Automatic Channel Setup (cont’d) 13 Adding/Deleting Channels The channels you no longer receive or seldom watch can be deleted from the memory. You also may add new channels into the memory. Make sure: l The VCR is on and in VCR position. (The VCR/TV light will appear. If it does not, press the VCR/TV button once.) 1 Press the MENU button until MENU 1 appears. 2 Press the PLAY button or the STOP button repeatedly to select CHANNEL SET UP. Then, press the F.FWD button. - M E N U 1 - TIMER PRO
Resumen del contenido incluido en la página 14
14 Setting the Clock Follow the steps below to set your VCR’s clock. Make sure: l The VCR is on and in VCR position. (The VCR/TV light will appear. If it does not, press the VCR/TV button once.) 1 Press the MENU button until MENU 1 appears. - M E N U 1 - B TIMER PROGRAMMING AUTO REPEAT [OFF] PICTURE SELECT CHANNEL SET UP CLOCK SET LANGUAGE SELECT AUTO SATELLITE LINK 2 Press the PLAY button or the STOP button repeatedly to select CLOCK SET. Then, press the F.FWD button. CLOCK SET 1 MONTH DAY YE
Resumen del contenido incluido en la página 15
Setting the Clock (cont’d) 15 6 While the HOUR space is flashing, press the PLAY button or the STOP button repeatedly until the desired hour appears. Then, press the F.FWD button. CLOCK SET MONTH DAY YEAR 0 3 / 2 0 MON 2 0 0 0 HOUR MINUTE AM/PM 0 5 : – – – – 7 While the MINUTE space is flashing, press the PLAY but- ton or the STOP button repeatedly until the desired minute appears. Then, press the F.FWD button. CLOCK SET MONTH DAY YEAR 0 3 / 2 0 MON 2 0 0 0 HOUR MINUTE AM/PM 0
Resumen del contenido incluido en la página 16
16 Language Selection Follow the steps below to change the language of the on-screen menus and displays. Make sure: l The VCR is on and in VCR position. (The VCR/TV light will appear. If it does not, press the VCR/TV button once.) 1 Press the MENU button until MENU 1 appears. - M E N U 1 - B TIMER PROGRAMMING AUTO REPEAT [OFF] PICTURE SELECT CHANNEL SET UP CLOCK SET LANGUAGE SELECT AUTO SATELLITE LINK 2 Press the PLAY button or the STOP button repeatedly to select LANGUAGE SELECT. Then, press t
Resumen del contenido incluido en la página 17
On-Screen Status Displays 17 You may access on-screen status displays by pressing the DISPLAY button repeatedly. On-screen status displays may include the current time, channel, and other information. l Press the DISPLAY button once. The COUNT on-screen status display will appear for five seconds. After five seconds, only the real-time counter will appear on the screen. This counter shows you the elapsed playing time of the tape (from the point at which the real-time counter was set to zero). l
Resumen del contenido incluido en la página 18
18 Remote Control Buttons POWER Button Press to turn the VCR on or off. Number Buttons Use to select channels. Channels 1 - 9 l To select, press 0, then press the channel number you want. For example, to select channel 7, press 0, 7. Channels 100 and above l To select, press the +100 button, then press the last two digits of the channel you want. For example, to select channel 117, press the +100 button, 1, 7. SPEED Button Press to select the recording speed (SP or SLP). Details are on pa
Resumen del contenido incluido en la página 19
Remote Control Buttons (cont’d) 19 EJECT Button Press to eject the tape. VCR/TV Button Use to select the signal that your TV receives. l VCR Position Use to watch a tape, to watch a program while recording it, or to watch a TV broadcast using the CHANNEL o/p or Number buttons to change channels at the VCR. l TV Position Use to watch TV (changing channels at the TV) or to watch one program while recording another. Details are on page 32. CHANNEL o/p Buttons Press to scan up or down through the V
Resumen del contenido incluido en la página 20
20 VCR Display Panel VCR Display Panel Information about VCR opera- tions is displayed here. Cassette Compartment Insert a video cassette tape here. POWER Light REC(ord) Light This light appears during a recording. It This light indicates that the power is on. flashes when a recording is paused. TIMER Light This light glows when the VCR is turned off to VCR/TV Light set a timer recording or during a One-Touch This light appears when the VCR Recording. It flashes if the power is off for a is in
