Resumen del contenido incluido en la página 1
3-062-327-11 (1)
Video Cassette
Recorder
Operating Instructions
The SmartFile function in this model meets the requirements of EU, EFTA,
Central and Eastern Europe
PAL NTSC 4.43
SLV-SF900G
©2000 Sony Corporation Chlorine free paper
filename[01GB02COV-NP0.fm] model name1[SLV-SF900G] model name2[]
[3-062-327-11 (1)]
Resumen del contenido incluido en la página 2
Do not install the unit in an inclined position. It is WARNING designed to be operated in a horizontal position To prevent fire or shock hazard, do not expose the only. unit to rain or moisture. Keep the unit and cassettes away from equipment To avoid electrical shock, do not open the cabinet. with strong magnets, such as microwave ovens or Refer servicing to qualified personnel only. large loudspeakers. Do not place heavy objects on the unit. Mains lead must only be changed at a qua
Resumen del contenido incluido en la página 3
Getting Started Table of contents Getting Started 4 Step 1 : Unpacking 5 Step 2 : Setting up the remote commander 9 Step 3 : Connecting the VCR 15 Step 4 : Tuning your TV to the VCR 18 Step 5 : Setting up the VCR with the Auto Set Up function 19 Step 6 : Setting the clock 24 Selecting a language 25 Presetting channels 28 Setting/changing the station names 30 Changing/disabling programme positions 34 Setting your personal code Basic Operations SmartFile function 37 Playing a tape 70 About the Sma
Resumen del contenido incluido en la página 4
Getting Started Step 1 : Unpacking Check that you have received the following items with the VCR : Remote commander Aerial cable SmartFile labels R6 (size AA) batteries 4 Unpacking filename[01GB04GET-NP0.fm] model name1[SLV-SF990G(ENG)] model name2[] [3-062-324-11 (1)]
Resumen del contenido incluido en la página 5
Getting Started Step 2 : Setting up the remote commander Inserting the batteries Insert two R6 (size AA) batteries by matching the + and – on the batteries to the diagram inside the battery compartment. Insert the negative (–) end first, then push in and down until the positive (+) end clicks into position. Using the remote commander You can use this remote commander to operate this VCR Remote sensor and a Sony TV. Buttons on the remote commander marked with a dot (•) can be used to op
Resumen del contenido incluido en la página 6
?/1 WIDE / AUDIO MONITOR a FASTEXT buttons DISPLAY t TV/VIDEO 123 Programme 456 number 789 buttons –/– – 0 PROG +/– c/C 2 +/– TV control buttons To Press Set the TV to standby mode ?/1 Select an input source: aerial in or line in t TV/VIDEO Select the TV’s programme position Programme number buttons, –/– –, PROG +/– Adjust the TV’s volume 2 +/– Switch to TV (Teletext off) a (TV) Switch to Teletext / (Teletext) 6 Setting up the remote commander filename[01GB04GET-NP0.fm] model name1[SL
Resumen del contenido incluido en la página 7
Getting Started To Press Select the sound AUDIO MONITOR Use FASTEXT FASTEXT buttons Call up the on-screen display DISPLAY Change the Teletext page c/C Switch to/from wide mode of a Sony wide TV (For other WIDE manufactures’ wide TVs, see “Controlling other TVs with the remote commander”.) Notes With normal use, the batteries should last about three to six months. If you do not use the remote commander for an extended period of time, remove the batteries to avoid possible damage from batt
Resumen del contenido incluido en la página 8
Code numbers of controllable TVs If more than one code number is listed, try entering them one at a time until you find the one that works with your TV. To switch to wide mode, see the footnotes below this table for the applicable code numbers. Manufacturer Code number Manufacturer Code number *1 Sony 01 , 02 NEC 66 *3 Akai 68 Nokia 15, 16, 69 *1 Blaupunkt 10 Panasonic 17 , 49 *1 *1 *1 C.G.M 09 Philips 06 , 07 , 08 Ferguson 52 Saba 12, 13 Goldstar 03, 04, 17 Samsung 22, 23 *1 *1 Grundig 10 , 1
Resumen del contenido incluido en la página 9
Getting Started Step 3 : Connecting the VCR We recommend connecting your VCR to your TV using a Scart (EURO- AV) cable. You must still connect your VCR to your TV with an aerial cable as well. If you use the Scart (EURO-AV) cable for connecting, you will improve the picture and sound quality playback of your VCR and make the set up easier. Connection to your TV with an aerial cable only, see page 12. Connection to your TV and Set-Top Box, see page 13. Connection to your TV with a Scart
Resumen del contenido incluido en la página 10
Connect LINE-1 (TV) on the VCR 3 and the Scart (EURO-AV) connector on the TV with the optional EURO- LINE-1 (TV) ( ) LIGNE-1 TV AV cable. This connection improves picture and sound quality.Whenever you want to watch the VCR picture, press t TV/ VIDEO to display the VIDEO indicator in the display window. Connect the mains lead to the mains. 4 You can now tune your TV to the VCR (see page 15). Notes If the TV is connected to the LINE-1 (TV) connector, setting the RF channel to OFF is reco
Resumen del contenido incluido en la página 11
Getting Started About the SMARTLINK features If the connected TV complies with AUTO SET UP SMARTLINK SPEP STEREO SMARTLINK, NexTView Link, OPC LP VIDEO TV NICAM VPS *1 MEGALOGIC , EASYLINK/ PDC EDIT H M S *2 *3 CinemaLink , Q-Link or T-V *4 LINK , you can use the SMARTLINK function after you complete the steps on the previous page (the SMARTLINK indicator appears in the VCR’s display window when you turn on the TV).You can enjoy the following SMARTLINK features. Preset Download You can
Resumen del contenido incluido en la página 12
Connection to your TV with an aerial cable only AERIAL IN AERIAL OUT Mains lead AERIAL IN to mains Aerial cable (supplied) : Signal flow Disconnect the aerial cable from your 1 TV and connect it to AERIAL IN on AERIAL ANTENNE the rear panel of the VCR. IN ENTREE OUT SORTIE Connect AERIAL OUT of the VCR AERIAL 2 ANTENNE and the aerial input of your TV using IN ENTREE the supplied aerial cable. OUT SORTIE Connect the mains lead to the mains. 3 You can now tune your TV to the VCR (see page 15).
Resumen del contenido incluido en la página 13
Getting Started Connection to your TV and Set-Top Box (STB) If you don’t use a STB, skip to page 15. If your STB has a Scart (EURO-AV) connector The illustration below shows an example of connecting the STB to LINE-3 IN. Scart cable (supplied with the STB) Scart (EURO-AV) AERIAL STB IN tLINE iLINE- - 3 IN AERIAL 1 (TV) OUT AERIAL IN Aerial cable (supplied) Scart (EURO-AV) Scart cable (not supplied) : Signal flow You can watch programmes from the Set-Top Box connected to this VCR on your TV
Resumen del contenido incluido en la página 14
If your STB does not have a Scart (EURO-AV) connector. Aerial cable (not supplied) AERIAL IN STB AERIAL iLINE- OUT 1 (TV) AERIAL IN Aerial cable (supplied) Scart (EURO-AV) Scart cable* (not supplied) : Signal flow * If your TV doesn’t have a Scart (EURO-AV) connector, the Scart cable connected to the VCR is not required. Additional connections To a stereo system You can improve sound quality by connecting a stereo system to the AUDIO AUDIO OUT OUT R/L jacks as shown on the right. R/L
Resumen del contenido incluido en la página 15
Getting Started Step 4 : Tuning your TV to the VCR If you have connected your VCR to the TV with an aerial cable only ?/1 RF CHANNEL g PROGRAM +/– Turn on your TV and press ?/1 (on/standby) to turn on the VCR. 1 Pull down the drop down panel. Press briefly RF CHANNEL on the VCR. AUTO SET UP 2 The factory-preset RF (Radio Frequency) channel appears in the display RF CHANNEL window.. AUTO SET UP SMARTLINK SPEP STEREO OPC LP VIDEO TV NICAM VPS PDC EDIT H M S Turn on your TV and select an u
Resumen del contenido incluido en la página 16
Tune in the programme position you have 4 selected (for ex. programme position "0") SONY VIDEO CASSETTE RECORDER until the picture shown on the right appears clearly on the TV screen (background must be green). Refer to your TV manual for tuning instructions. If the picture does not appear clearly, see “To obtain a clear picture from the VCR” below. Press RF CHANNEL. AUTO SET UP 5 You have now tuned your TV to the VCR. From now on, whenever you RF CHANNEL want to play a tape, set the
Resumen del contenido incluido en la página 17
Getting Started If you have connected your VCR to the TV with a Scart (EURO-AV) connector and an aerial cable as well In order to avoid any interferences with existing broadcasts, we recom- mend you to set RF channel to the OFF position. RF CHANNEL g PROGRAM +/– Turn on your TV and press ?/1 (on/standby) to turn on the VCR. 1 Pull down the drop down panel. Press briefly RF CHANNEL on the VCR. AUTO SET UP 2 The factory-preset RF (Radio Frequency) channel appears in the display RF CHANNEL
Resumen del contenido incluido en la página 18
Step 5 : Setting up the VCR with the Auto Set Up function Before using the VCR for the first time, set up the VCR using the Auto Set Up function.With this function, you can set the language for the on-screen display, TV channels, guide channels for the VIDEO Plus + system, and VCR clock automatically. Before you start ... Turn on the set -top box if it is connected to the VCR only by the aerial cable and not to the Scart cable. AUTO SET UP g PROGRAM +/– Hold down AUTO SET UP on the VCR f
Resumen del contenido incluido en la página 19
Getting Started Step 6 : Setting the clock You must set the time and date on the VCR to use the timer recording features properly. If the VCR clock was not set in the Auto Set MENU Up procedure, you need to set it manually. The Auto Clock Set function works only if a station in your area is broadcasting a time M/m/
Resumen del contenido incluido en la página 20
Press M/m to highlight MANUAL CLOCK 3 ADJUST, then press OK. AUTO ADJUST OFF PLAY MANUAL ADJUST 1 . 1 . 2000 SAT 0 : 00 OK SELECT : SET : CONFIRM : OK EXIT : MENU Press M/m to set the date. CLOCK 4 AUTO ADJUST OFF PLAY MANUAL ADJUST 28 . 1 . 2 0 0 0 FRI 0 : 0 0 OK SELECT : SET : CONFIRM : OK EXIT : MENU Press , to highlight the month and set CLOCK 5 the month pressing M/m. AUTO ADJUST OFF PLAY MANUAL ADJUST 28.9 .2000 THU 0 :00 OK SELECT : SET : CONFIRM : OK EXIT : MENU Set the year, hour,
