Resumen del contenido incluido en la página 1
3-081-621-E2 (1) GB
Video Cassette
Recorder
Operating Instructions
PAL SECAM
SLV-SE830B
SLV-SE730B
SLV-SE630B
SLV-SE230B
© 2003 Sony Corporation
Resumen del contenido incluido en la página 2
Caution WARNING Television programmes, films, video tapes and other To prevent fire or shock hazard, do not expose the materials may be copyrighted. Unauthorized unit to rain or moisture. recording of such material may be contrary to the To avoid electrical shock, do not open the cabinet. provisions of the copyright laws. Also, use of this Refer servicing to qualified personnel only. recorder with cable television transmission may require authorization from the cable television Mains l
Resumen del contenido incluido en la página 3
Getting Started Table of contents Getting Started Additional Operations 54 Playing/searching at various speeds 4 Index to parts and controls 56 Setting the recording duration time 11 Step 1 : Unpacking 57 Checking/changing/cancelling 12 Step 2 : Setting up the remote timer settings commander 59 Recording stereo and bilingual 16 Step 3 : Connecting the VCR programmes (not available on SLV- 19 Step 4 : Setting up the VCR with SE230B) the Auto Set Up function 62 Searching using the index funct
Resumen del contenido incluido en la página 4
Getting Started Index to parts and controls Refer to the pages indicated in parentheses ( ) for details. Front panel For SLV-SE830B A?/1 (on/standby) switch Kx (stop) button* (20) (36) (70) (71) B Remote sensor (12) LX (pause) button (36) (46) (70) (71) C Tape compartment M CHAINE +/– buttons* (43) (55) (64) DA (eject) button (36) N PROG (Dial Timer) (42) Em (rewind) button (36) (54) O DOUBLAGE SON button (71) F Shuttle ring (54) P t LIGNE-2 G (left) o D (right) jacks (covered)* (68) (69) (71
Resumen del contenido incluido en la página 5
Getting Started For SLV-SE730B and SE630B A?/1 (on/standby) switch H ENR z (record) button (39) (56) (70) B Remote sensor (12) Ix (stop) button* (20) (36) (70) (71) C Tape compartment JX (pause) button (36) (70) (71) DA (eject) button (36) K CHAINE +/– buttons* (55) (64) Em (rewind) button (36) (54) * The H (play), x (stop) and CHAINE + FH (play) button* (36) (54) buttons have a tactile dot. GM (fast-forward) button (36) (54) continued Index to parts and controls 5
Resumen del contenido incluido en la página 6
For SLV-SE230B A?/1 (on/standby) switch H ENR z (record) button (39) (56) (70) BA (eject) button (36) Ix (stop) button* (20) (36) (70) (71) C Remote sensor (12) JX (pause) button (36) (70) (71) D Tape compartment K CHAINE +/– buttons* (55) (64) Em (rewind) button (36) (54) * The H (play), x (stop) and CHAINE + FH (play) button* (36) (54) buttons have a tactile dot. GM (fast-forward) button (36) (54) Index to parts and controls 6
Resumen del contenido incluido en la página 7
Getting Started Display window For SLV-SE830B and SE730B 1 2 3 45 8 7 6 A Tape indicator E TV indicator (41) B MAGN indicator (16) (39) F STEREO indicator (59) C Time counter/clock/line/programme G Tape speed indicators (38) position indicator (37) (38) (70) H Timer/recording indicator (39) (44) D (smartlink) indicator (17) (49) (52) For SLV-SE630B and SE230B A Tape indicator E STEREO indicator* (59) B Time counter/clock/line/programme F VIDEO (video) indicator (16) (39) position indicator (37)
Resumen del contenido incluido en la página 8
Rear panel For SLV-SE830B, SE730B and SE630B For SLV-SE230B A (in from antenna) connector (16) E LIGNE-1 (EURO AV) connector (16) (33) (68) 1 B LIGNE-3 (DEC/EXT) connector* 2 LIGNE-2 (DEC/EXT) connector* F (out to tv) connector (16) (18) (33) (69) 1 * SLV-SE830B only 2 * SLV-SE730B, SE630B and SE230B only C Mains lead (16) 3 * not available on SLV-SE630B D AUDIO (OUT/SORTIE) R/D (right) 3 L/G (left) jacks* (18) Index to parts and controls 8
Resumen del contenido incluido en la página 9
Getting Started AZ (eject) button (36) Remote commander B (wide) button (for TV) (14) (15) C AFFICH button (14) (37) (39) D COMPT/DUREE REST button (39) 1 E Programme number buttons* (13) (40) F - (ten’s digit) button (13) (40) 2 G / (Teletext) button (for TV)* (14) 123 H2 (volume) +/– buttons (for TV) 456 (13) 789 I a TV power on/TV mode select 2 0 button (for TV)* (13) Jz ENR (record) button (39) (56) K SP (Standard Play)/LP (Long Play) 3 button* (38) L MENU button (21) (57) MX (pause)/M
Resumen del contenido incluido en la página 10
N[TV] / [MAGN] remote control switch (12) O?/1 (on/standby) switch (13) (14) (49) 1 3 P CHOIX SON button* * (14) (60) Q t TV/MAGN button (13) (16) (39) R ANNUL/0 button (37) (48) (57) S CHOIX ENTREE button (38) (52) 123 (70) 1 456 T CHAINE (programme) +/– buttons* (13) (38) 789 c ⁄ C Teletext page access buttons 0 2 (for TV)* (14) 4 Uy RALENTI button* (54) 4 V ×2 button* (54) W./> (index search) 3 4 buttons* * (62) X MINUTERIE button (47) (51) 1 * The H (play), CHOIX SON, number 5 and C
Resumen del contenido incluido en la página 11
Getting Started Step 1 : Unpacking Check that you have received the following items with the VCR: Remote commander Aerial cable R6 (size AA) batteries PERITEL cable Check your model name The instructions in this manual are for the 4 models: SLV-SE830B, SE730B, SE630B and SE230B. Check your model name by looking at the rear panel of your VCR. SLV-SE830B is the model used for illustration purposes. Any difference in operation is clearly indicated in the text, for example, “SLV-SE830
Resumen del contenido incluido en la página 12
Step 2 : Setting up the remote commander Inserting the batteries Insert two R6 (size AA) batteries by matching the + and – on the batteries to the diagram inside the battery compartment. Insert the negative (–) end first, then push in and down until the positive (+) end clicks into position. Using the remote Remote sensor commander You can use this remote commander to operate this VCR and a Sony TV. Buttons on the remote commander marked with a dot (•) can be used to operate your So
Resumen del contenido incluido en la página 13
Getting Started ?/1 CHOIX SON AFFICH t TV/MAGN 123 Programme 456 number 789 buttons - 0 / 2 +/– CHAINE +/–/ a c ⁄ C FASTEXT buttons TV control buttons To Press Set the TV to standby mode ?/1 Select an input source: aerial in or line in t TV/MAGN Select the TV’s programme position Programme number buttons, -, CHAINE +/– Adjust the volume of the TV 2 +/– 1 Switch to TV (Teletext off)* a (TV) continued Setting up the remote commander 13
Resumen del contenido incluido en la página 14
To Press 1 Switch to Teletext* / (Teletext) 2 Select the sound* CHOIX SON 1 Use FASTEXT* FASTEXT buttons Call up the on-screen display AFFICH 1 Change the Teletext page* c ⁄ C Switch to/from wide mode of a Sony wide TV (For (wide) other manufactures’ wide TVs, see “Controlling other TVs with the remote commander (SLV- SE830B only)” below.) Notes With normal use, the batteries should last about three to six months. If you do not use the remote commander for an extended period of time, re
Resumen del contenido incluido en la página 15
Getting Started Code numbers of controllable TVs If more than one code number is listed, try entering them one at a time until you find the one that works with your TV. To switch to wide mode, see the footnotes below this table for the applicable code numbers. Manufacturer Code number Manufacturer Code number 1 1 Sony Panasonic 01* , 02 17* , 49 1 1 1 Akai 68 Philips 06* , 07* , 08* Ferguson 52 Saba 12, 13 1 1 Grundig 10* , 11* Samsung 22, 23 Hitachi 24 Sanyo 25 JVC 33 Sharp 29 Loewe 45 Telefu
Resumen del contenido incluido en la página 16
Step 3 : Connecting the VCR LIGNE-1 Mains lead (EURO AV) ANTENNE ENTREE to mains Aerial cable (supplied) PERITEL PERITEL cable (supplied) : Signal flow Disconnect the aerial cable from 1 your TV and connect it to on the rear panel of the VCR. Connect of the VCR and the 2 aerial input of your TV using the supplied aerial cable. Connect LIGNE-1 (EURO AV) on 3 the VCR and the PERITEL connector on the TV with the supplied PERITEL cable. Whenever you want to watch the VCR picture, press
Resumen del contenido incluido en la página 17
Getting Started About the SMARTLINK features (not available on SLV-SE630B and SE230B) If the connected TV complies with 1 SMARTLINK, MEGALOGIC* , 2 3 EASYLINK* , Q-Link* , EURO 4 5 VIEW LINK* , or T-V LINK* , this VCR automatically runs the SMARTLINK function after you complete the steps on the previous page (the indicator appears in the VCR’s display window when you turn on the TV). You can enjoy the following SMARTLINK features. TV Direct Rec You can easily record what you are watc
Resumen del contenido incluido en la página 18
Additional connections To a stereo system (not available on SLV-SE630B and SE230B) AUDIO R/D L/G You can improve sound ENTREE quality by connecting a LIGNE stereo system to the AUDIO R/D L/G jacks as shown on the right. Audio cable (not supplied) : Signal flow To a satellite or digital tuner with Line Through Using the Line Through 1 LIGNE-3 (DEC/EXT)* or function, you can watch 2 SORTIE LIGNE-2 (DEC/EXT)* programmes from a satellite LIGNE or digital tuner connected to this VCR on t
Resumen del contenido incluido en la página 19
Getting Started Step 4 : Setting up the VCR with the Auto Set Up function Before using the VCR for the first time, set up the VCR using the Auto Set Up function. With this function, you can set the TV channels, guide channels for the ShowView system*, and VCR clock* automatically. Turn on your TV and set it to the video channel. 1 Connect the mains lead to the mains. 2 The VCR automatically turns on, and the message for the Auto Set Up function appears. Press OK. 3 SÉLECTION DU PAYS The S
Resumen del contenido incluido en la página 20
To cancel the Auto Set Up function Press MENU. Notes Whenever you operate the Auto Set Up function, some of the settings (ShowView*, timer, etc.) will be reset. If this happens, you have to set them again. Auto preset starts automatically only when you plug in the mains lead for the first time after you purchase the VCR. If you want to use the Auto Set Up function again, press MENU, then press M/m/
