Resumen del contenido incluido en la página 1
HD DIGITAL VIDEOCASSETTE RECORDER
HDW-2000
HDW-M2000
HDW-M2000P
[English]
OPERATION MANUAL
1st Edition (Revised 5)
Serial No. 16001 and Higher (HDW-2000/M2000)
Serial No. 46001 and Higher (HDW-M2000P)
Resumen del contenido incluido en la página 2
This symbol is intended to alert the user to WARNING the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. To prevent fire or shock hazard, do not expose the unit to rain or moisture. For the customers in the U.S.A. To avoid electrical shock, do not open This equipment has been tested and found to comply with the cabinet. Refer servicing to qualified the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules
Resumen del contenido incluido en la página 3
WARNING: THIS WARNING IS APPLICABLE FOR Pour les clients européens OTHER COUNTRIES. Ce produit portant la marque CE est conforme à la fois à la Directive sur la compatibilité électromagnétique (EMC) (89/ 1.Use the approved Power Cord (3-core mains)/Appliance 336/CEE) et à la Directive sur les basses tensions (73/23/ Connector/Plug with earthing-contacts that conforms to CEE) émises par la Commission de la Communauté the safety regulations of each country if applicable. européenne. 2. Use the Pow
Resumen del contenido incluido en la página 4
Table of Contents 1-1 Features ........................................................................................... 1-1 Chapter 1 Overview 1-2 Example System Configuration .................................................... 1-4 2-1 Control Panels ................................................................................ 2-1 Chapter 2 Location and 2-1-1 Upper Control Panel .............................................................. 2-2 Function of Parts 2-1-2 Lower Control P
Resumen del contenido incluido en la página 5
Table of Contents 6-1 Overview ......................................................................................... 6-1 Chapter 6 Shot Mark 6-2 Shot Mark Operation Menu .......................................................... 6-2 Function 6-3 Shot Mark Operations ................................................................... 6-3 6-3-1 Reading Shot Marks .............................................................. 6-3 6-3-2 Writing Shot Marks....................................
Resumen del contenido incluido en la página 6
Chapter 1 Overview Chapter 1 Overview 1-1 Features The HDW-2000/M2000/M2000P is a high-definition High-precision digital signal processing (HD) digital videocassette recorder based on the and range of interfaces HDCAM format. This unit uses large scale integrated circuits for signal The digital signal processing uses HD 4:2:2 processing, and has a simple internal construction, component video signals complying with SMPTE allowing it to provide functionality at least equivalent 292M, which are c
Resumen del contenido incluido en la página 7
Chapter 1 Overview 1-1 Features Basic operation buttons and jog/shuttle DMC editing dial This allows automatic editing with a varying playback speed memorized beforehand for an edit segment. The basic buttons and jog/shuttle dial for VTR and editing operations are provided in the conventional VTR layout, ensuring continuity with conventional Split editing operating panels. In insert editing, this allows editing with the audio IN and OUT points to be displaced from the video edit Time data displ
Resumen del contenido incluido en la página 8
Chapter 1 Overview Remote control function This unit can be controlled from an external remote controller or editor through an interface complying with RS-422A (serial 9-pin). Since two remote control connectors are provided, you can also control a number of VTRs simultaneously. Additionally, a parallel (50-pin) interface is also fitted as standard, supporting easy external control through the parallel interface. Rack mounting Using the optional RMM-131 Rack Mount Adaptor, you can mount the unit
Resumen del contenido incluido en la página 9
Chapter 1 Overview 1-1 Features 1-2 Example System Configuration The following conceptual diagram shows an example of use. BVE-series editor Tape control SDTI (optional) Audio/video HDSDI server system Digital cassette HDW-2000/M2000/M2000P HDSDI/Analog HDSDI composite SDTI (optional) Video monitor HD VTR Analog composite/component Analog audio SDI Audio monitor SD VTR 1-4 Chapter 1 Overview
Resumen del contenido incluido en la página 10
Chapter 2 Location and Function of Parts Chapter 2 Location and Function of Parts 2-1 Control Panels There are three control panels, as follows: •Upper control panel • Lower control panel •Switch panel Z Upper control panel (see page 2-2) 59.94 VID. IN PB/EE CONFI CTL/TCMENU TCGSET SDI EE DISABL TC Lower control panel (see page 2-3) CONTROL PANEL Switch panel (access by opening the lower control panel) (see page 2-14) KEY INHI PANEL SEL ON OFF REAR FRONT To open the lower control panel To clos
Resumen del contenido incluido en la página 11
Chapter 2 Location and Function of Parts 2-1 Control Panels 2-1-1 Upper Control Panel 1 POWER switch 2 REMOTE buttons and RS-232C indicator 3 EJECT button 4 Format indicators Cassette compartment BETACAM/SP BETACAM SX MPEG IMX Digital BETACAM HDCAM REMOTE POWER EJECT 1(9P) 2(50P) RS-232C Z PHONES 5 PHONES jack and control 1 POWER switch 4 Format indicators Pressing the ‘ ) ’ side of the switch powers the unit on. The indicator (BETACAM/SP, BETACAM SX, When the unit is powered on, the audio set
Resumen del contenido incluido en la página 12
Chapter 2 Location and Function of Parts 2-1-2 Lower Control Panel 4 Time data/menu display section (see page 2-7) 2 CHANNEL CONDITION 5 MULTI CONTROL knob and PUSH/ indicator (see page 2-6) SHIFT indicator (see page 2-8) 1 Audio control section 3 Menu control buttons 6 RESET button (see page 2-8) (see page 2-4) (see page 2-6) 59.94 VID. IN PB/EE CONFI CTL/TCMENU TCGSET SDI EE DISABL TC 7 Search control section (see page 2-8) 8 REC INHI indicator (see page 2-10) 9 Tape transport control sectio
Resumen del contenido incluido en la página 13
Chapter 2 Location and Function of Parts 2-1 Control Panels 2 DISPLAY FULL/FINE button 1 Audio control section Pressing this button toggles the display mode of the level meters in the audio setting display section 1 Audio selection function selector buttons between FULL and FINE. 2 DISPLAY FULL/FINE button FULL: The display covers the range –60 dB to 0 dB 3 Audio setting display section or –40 dB to +20 dB as selected using setup menu item 806. In this mode the segment of the display 4 Audio m
Resumen del contenido incluido en la página 14
Chapter 2 Location and Function of Parts the MIX indicator for the corresponding track DATA indicator: Lights when the audio output flashes. The buttons in the upper row (EXT row) signals are recognized as data with the unit in select the input channel signals to record on the recording, 1) corresponding track. By pressing two buttons at E-E , or playback mode. the same time, you can specify that the signals of OVER indicator: While the unit is in recording or two input channels be mixed for rec
Resumen del contenido incluido en la página 15
Chapter 2 Location and Function of Parts 2-1 Control Panels 5 REC (recording) controls 3 Menu control buttons These individually adjust the recording levels on channels 1 to 4, and cue audio. These buttons are used for function menu (see the To set the recording level, put the unit into E-E mode, following section “Overview of the function menu”) press to protrude the control knobs and adjust the level and setup menu (see Chapter 10) operations. The page while watching the level meters. button
Resumen del contenido incluido en la página 16
Chapter 2 Location and Function of Parts Time data type indicator 4 Time data/menu display section This indicates the type of data displayed in the time data display area 1. 1 Time data display LTC (longitudinal time code): Time code recorded on a longitudinal track on the tape 59.94 LUB: LTC user bit values VITC (vertical interval time code): Time code 1 VID. IN PB/EE CONFI CTL/TCMENU TCGSET recorded in the vertical blanking interval EE SDI DISABL TC VIUB: VITC user bit value 2 Menu display D
Resumen del contenido incluido en la página 17
Chapter 2 Location and Function of Parts FORWARD VAR 2-1 Control Panels CONFI (ON)/PREREAD indicators 2 Menu display 1) These indicate the state of the VTR CONFI playback This displays the function menu and setup menu. function. When the CONFI playback function is For details on the function menu, see Chapter 9 and for enabled, the CONFI indicator appears, and when details on the setup menu, see Chapter 10. CONFI playback is actually being carried out the ON indicator also appears. When F6 (PRE
Resumen del contenido incluido en la página 18
Chapter 2 Location and Function of Parts Playback modes using the search dial 1 SHUTTLE button Playback mode Operations and functions To use the search dial for playback in shuttle mode, press this button, turning it on. Shuttle Press the SHUTTLE button or the search dial so that the SHUTTLE button lights, then turn the search dial. For details of playback in shuttle mode, see the description Playback is carried out at a speed of the search dial 5. determined by the position of the search dial.
Resumen del contenido incluido en la página 19
Chapter 2 Location and Function of Parts 2-1 Control Panels Cuing up edit points 8 REC INHI (recording inhibit) indicator Hold down the IN, OUT, AUDIO IN, or AUDIO OUT button while pressing this button to cue up to the This indicator is on or off according to the corresponding edit point. combination of the F5 (RECINH) setting on function menu page 4 and the record inhibit plug on the 2 REC (record) button cassette, as shown in the following table. When this To start recording, press this butt
Resumen del contenido incluido en la página 20
Chapter 2 Location and Function of Parts 5 STOP button q; Editing mode setting section To stop recording or playback, press this button, turning it on. When you stop playback, the unit switches either to still playback or to E-E mode according to the setting 1 ASSEMBLE button on function menu HOME page for F2 (PB/EE) and the setting of setup menu item 108. ASSEMBLE INSERT VIDEO TC CH1 CH2 CH3 CH4 CUE Fault display function The STOP button flashes in the following cases related 2 INSERT buttons
