Resumen del contenido incluido en la página 1
iSCRUB
Operating Instructions (ENG)
MODELS: CS24 CSE24 CS24SP
10060210 10060250 10060220
CSX24 CSXE24 CSE24SP
10060270 10060290 10060260
CSXEO24
10060300
Read these instructions before using the machine
CP
86037660 05/27/08
PRV NO. 980228
Resumen del contenido incluido en la página 2
MACHINE DATA LOG/OVERVIEW MODEL _______________________________________ DATE OF PURCHASE __________________________ SERIAL NUMBER ______________________________ SALES REPRESENTATIVE # _____________________ YOUR DEALER Name: __________________________________________________________________________________________________ Address: _________________
Resumen del contenido incluido en la página 3
TABLE OF CONTENTS GROUP PARTS LIST Machine Data Log/Overview................................2 Table Of Contents ................................................3 Bumper ..............................................................5-1 Control Panel-Basic-Cylindrical.........................5-3 HOW TO USE THIS MANUAL Control Panel-Deluxe ........................................5-5 Control Panel Housing.......................................5-7 How To Use This Manual............
Resumen del contenido incluido en la página 4
HOW TO USE THIS MANUAL This manual contains the following sections: The SAFETY section contains important information regarding hazard or unsafe practices of the - HOW TO USE THIS MANUAL machine. Levels of hazards are identified that could - SAFETY result in product or personal injury, or severe injury - OPERATIONS resulting in death. - MAINTENANCE - PARTS LIST The OPERATIONS section is to familiarize the operator with the operation and function of the The HOW TO USE THI
Resumen del contenido incluido en la página 5
IMPORTANT SAFETY INSTRUCTIONS When using an battery powered appliance, basic precaution must always be followed, including the following: READ ALL INSTRUCTIONS BEFORE USING THIS MACHINE. To reduce the risk of fire, electric shock, or injury: Use only indoors. Do not use outdoors or expose to rain. Use only as described in this manual. Use only manufacturer’s recommended components and attachments. If the machine is not working properly, has been dropped, damaged, left outdoors, or dropped
Resumen del contenido incluido en la página 6
HAZARD INTENSITY LEVEL The following symbols are used throughout this guide as indicated in their descriptions: HAZARD INTENSITY LEVEL There are three levels of hazard intensity identified by signal words -WARNING and CAUTION and FOR SAFETY. The level of hazard intensity is determined by the following definitions: WARNING - Hazards or unsafe practices which COULD result in severe personal injury or death. CAUTION - Hazards or unsafe practices which could result in minor personal injury or
Resumen del contenido incluido en la página 7
SAFETY LABEL LOCATION NOTE: These drawings indicate the location of safety labels on the machine. If at any time the labels become illegible, promptly replace them. 86244300 PRV NO. 500955 WARNING LABEL 86252520 PRV NO. 80885 BATTERY CAUTION 86037660 CHARIOT 11/09/06 2-3
Resumen del contenido incluido en la página 8
TECHNICAL SPECIFICATIONS ITEM DIMENSION/CAPACITY Nominal power 2100 W Rated Voltage 36 Volts DC Rated Amperage 58 amps Batteries 3 X12 Volt 195-215 AH @ 20 hr. rate 21 in. x 16 in. x 17 in. tall Battery Compartment Dimensions (533mm x 406mm x 432mm) Scrub Brush Motors - Disk Machine 2 x .3 HP (190 W) Scrub Brush Motors - Cylindrical Machine 2 x .75 HP (560 W) Vacuum Motor(s) .75 HP (560 W) Maximum flow rate of vacuum motor 77.0 cfm (36.4 liters per second) Maximum suction of vacu
Resumen del contenido incluido en la página 9
TECHNICAL SPECIFICATIONS ITEM MEASURE Height 50.6 inches (1285 mm) Length 52.5 inches (1330 mm) Width without squeegee 26.5 inches (670 mm) Width of squeegee - Disk Machine 32.7 inches (830 mm) Width of squeegee - Cylindrical Machine 29 inches (737 mm) Width of scrub path - Disk Machine 24 inches (610 mm) Width of scrub path - Cylindrical Machine 23 inches (585 mm) LENGTH WIDTH HEIGHT SPECIAL NOTES: This appliance is not intended for use by persons The sound pressure level
Resumen del contenido incluido en la página 10
HOW THIS MACHINE WORKS The Chariot® is a battery powered, self-propelled, The scrub deck side squeegees control the cleaning hard floor scrubber intended for commercial use. solution on the floor so that the squeegee can pick it The appliance applies a cleaning solution onto a up. The brush pressure switch controls the motors hard floor, scrubs the floor with brushes, and then and lift actuator to turn the motors on and lower the vacuums the soiled water back into the recovery deck,
Resumen del contenido incluido en la página 11
COMPONENTS 2 1 7 3 11 5 6 12 10 4 9 8 7. Recovery Dome 1. Control Panel-Drive 8. Recovery Drain Hose 2. Control Panel-Scrub 9. Scrub Deck Aqua-Mizer 3. Control Housing 10. Scrub Deck Skirts/Side Squeegees 4. Pedal Platform 11. Solution Cover 5. Rear Cover 6. Tank 12. Solution Drain Hose 86037660 CHARIOT 11/09/06 3-4
Resumen del contenido incluido en la página 12
DRIVE CONTROLS 10 (Basic) 2 8 6 3 1 7 11 (Basic) 9 5 4 86037660 CHARIOT 11/09/06 3-5
Resumen del contenido incluido en la página 13
DRIVE CONTROLS 1. Key Switch 7. Drive Reset Button 2. Emergency Stop/Brake Switch 8. Horn Button 3. Directional Control Switch 9. Steering Wheel 4. Throttle Pedal 10. Battery Discharge 5. Operator Presence Pedal Indicator (Basic Only) 6. Speed Control Switch 11. Hour Meter (Basic Only) 1. KEY SWITCH Controls the power for machine functions. To turn the machine power on, rotate key clockwise. To turn the machine off, rotate key counterclockwise. Deluxe Only: When the key is turned
Resumen del contenido incluido en la página 14
DRIVE CONTROLS 6. SPEED CONTROL SWITCH Controls the maximum speed of the machine. There are two setting intended for scrubbing, speeds 1 and 2. Speed 3 is recommended for transport only, not scrubbing. To increase speed, press the top of the switch. To decrease speed, press bottom of the switch. Speeds can be adjusted at any time, whether machine is moving or not. Basic: The position of the switch indicates speed setting. Deluxe: The display indicates speed setting. When the key i
Resumen del contenido incluido en la página 15
DRIVE CONTROLS 10A. BATTERY CHARGE LEVEL INDICATOR-BASIC Indicates the charge level of the batteries. The meter display is divided into 10 vertical bars. Bars illuminated on the far right indicate full charge. Bars flashing near the left side indicate the batteries should be recharged. Further operation of the machine could damage the machine or the batteries. When the machine is left overnight with less than a full charge, the display may initially indicate a full charge. It will al
Resumen del contenido incluido en la página 16
SCRUB CONTROLS-BASIC AND CYLINDRICAL 4 2 3 1 1. Squeegee Lift Lever 3. Brush Pressure Indicator 2. Scrub Deck Actuator Switch 4. Solution Control Knob 86037660 CHARIOT 11/09/06 3-9
Resumen del contenido incluido en la página 17
SCRUB CONTROLS-BASIC-CYLINDRICAL 1. SQUEEGEE LIFT LEVER Raises and lowers the squeegee, and turns the vacuum motor on and off. To lower squeegee and start vacuum motor, lift the lever from its raised position. To raise squeegee and stop vacuum motor, lift the lever from its lowered position. 2. ACTUATOR SWITCH Raises and lowers the scrub deck, turns the scrub brush motors on and off, and adjusts the amount of brush/pad pressure to the floor. To lower the scrub deck, turn on scrub brush
Resumen del contenido incluido en la página 18
SCRUB CONTROLS-DELUXE 5 1 4 3 2 1. One Touch Switch 4. Vacuum/Squeegee Switch 2. Solution Control Switch 5. Display Toggle Switch 3. Brush Pressure Switch 1. ONE TOUCH SWITCH This switch controls the scrub brushes and vacuum all in one touch. To start scrubbing, press the one touch switch. The brush drive motors will turn on, the scrub deck will lower to the "light scrub" position, the solution will flow at “one bar” rate, the squeegee will lower and the vacuum will turn on. The info
Resumen del contenido incluido en la página 19
SCRUB CONTROLS-DELUXE 2. SOLUTION CONTROL SWITCH This switch controls the amount of solution flow to the scrub deck. The information screen will show the solution setting. There are 4 different flow settings. To increase the solution flow, press the bottom of the solution control switch (+). To decrease solution flow, press the top of the switch (-). If the brush motors are turned off or the throttle pedal is in neutral, the flow is automatically interrupted until the motors are turned
Resumen del contenido incluido en la página 20
SCRUB CONTROLS-SQUEEGEE 1 2 2 DISK SCRUBBER CYLINDRICAL SCRUBBER 1. Squeegee Deflection Adjustment Knobs 2. Squeegee Pitch Adjustment Rod 86037660 CHARIOT 11/09/06 3-13
