Manual de instrucciones de Guardian Technologies , LLCGGU350TT

Resumen del contenido incluido en la página 1

USE & CARE INSTRUCTIONS
®
Germ Guardian
2-in-1 Upright
and Canister
with Silver Clean Technology
English E - 1
French F - 1
Spanish S - 1
Replacement Parts:
HEPA Dirt Cup Filter FLTB
Exhaust Filter FLTA
Belt BLT1
Model No. GGU350TT
1-Year Limited Warranty
www.germguardian.com
1.866.603.5900
REV0609
!
WARNING:
Date Purchased
Cleaner assembly may include
month ________
small parts. Small parts can
year _________ present a choking hazard. E-1

Resumen del contenido incluido en la página 2

ThiS vacuum iS inTEndEd For houSEhold uSE only ThiS vacuum iS inTEndEd For houSEhold uSE only IMPoRTANT SAFETy INSTRUCTIoNS IMPoRTANT SAFETy INSTRUCTIoNS When you use an appliance, basic precautions should always be followed. ! WARNING: To REDUCE THE RISK oF FIRE, ELECTRIC SHoCK oR INJUR y: Please read the entire manual before using this appliance. • Do not leave appliance when plugged in. Unplug vacuum from wall outlet when not in use and • READ ALL INSTRUCTIoNS BEFoRE USE. before servicing

Resumen del contenido incluido en la página 3

P O W E R plEaSE rEad all inSTrucTionS bEForE uSinG ThiS appliancE HoSE CRADLE ASSEMBLy WARNING! Do not use the Dirt Cup Handle to move the cleaner. HoSE CRADLE ASSEMBLy THERMAL RESET BUTToN: • Set hose cradle on the top of the cleaner. (Fig. 1) Operates due to overheating, caused by a full dirt cup, clogged filter or blocked pipes. Unplug the cleaner and remove the blocked materials. To operate again, after • using a phillips screwdriver, secure the 3/4-inch screw. cooling down the clean

Resumen del contenido incluido en la página 4

VACUUM ASSEMBLy: UPRIGHT USE (CoNTD) HANDLE ASSEMBLy HANDLE ASSEMBLy TooL ASSEMBL y • insert handle in the handle inlet on the top of the body. (Fig. 6) TooL ASSEMBL y • attach crevice tool, dusting brush and upholstery brush into Handle HANDLE DISASSEMBLy storage area on the back of the vacuum. (Fig. 8) Crevice Tool • push the handle removal button. • pull handle upward to remove. Dusting Brush Fig. 8 Protrustion to Lock Upholstery Brush Handle Inlet Handle USING IN UPRIGHT MoDE Remova

Resumen del contenido incluido en la página 5

UPRIGHT MoDE: TooL USAGE SToRING IN UPRIGHT MoDE TooL USAGE • after using the vacuum, store in upright mode. 1. Turn brush oFF. • Store accessories on the storage clips located on the vacuum body. 2. remove hose from base hose connector on the lower portion of the cleaner. (Fig. 12) • Wrap the cord around the cord storage hooks on the side of the body and hang the 3. remove handle from cleaner: push handle removal button and pull up on handle to plug at the cord clip on the wand. (Fig. 18)

Resumen del contenido incluido en la página 6

CLEANING & REPLACING FILTER CLEANING DIRT CUP To o PTIMIz E THE VACUUM PERFoRMANCE yo U SHoULD CLEAN THE FILTER EACH TIME yoU EMPTy THE DIRT CUP . • you will need to empty dirt cup when dust reaches the Full line. • Turn oFF the vacuum and unplug from electrical outlet. 1. lift up the dirt cup cover, rotate and remove the filter protector. • Grasp the dirt cup handle and depress button, pull out the dirt cup from 2. rotate and remove the inner filter. (Fig. 21) the body. (Fig. 19)

Resumen del contenido incluido en la página 7

BELT REPLACEMENT TRoUBLESHooTING GUIDE WARNING: BEFoRE REPLACING THE BELT, MAKE SURE THE CLEANER Please check each item below if you have trouble with your vacuum. IS UNPLUGGED FRoM THE ELECTRICAL oUTLET . Before checking, always ensure that the vacuum is unplugged from the power supply. • Turn oFF the cleaner and unplug from electrical outlet. • remove the bottom plate of the base by removing the five (5) screws using a PRoBLEM PRoBLEM SoLUTIoN phillips screwdriver. (Fig. 25) • Set the

Resumen del contenido incluido en la página 8

LIMITED WARRANTy To the consumer, Guardian Technologies llc warrants this product to be free of defects in materials and workmanship commencing upon the date of the original purchase. Save your original sales receipt to validate start of warranty period. if this product should become defective within the warranty period, we will repair or replace any defective parts free of charge. The complete machine must be delivered pre-paid to any authorized Guardian Technologies llc warranty service c