Manual de instrucciones de Billy Goat KV650HFB

Resumen del contenido incluido en la página 1

KV Push Owner’s Manual





















BILLY GOAT KV VACUUM
Owner's Manual
KV600, KV650H, KV600FB, KV650HFB


Accessories

ON BOARD OPTIONAL NOZZLE WEAR CASTER KIT SHREDDER KV LINER KIT PROTECTIVE

VACUUM FELT/MESH GUARD KIT KIT COVER

HOSE KIT DEBRIS BAG

4"(102mm) x For use in For use in To allow for Shreds Increases the Protects the

7.5' (2.13m) lea

Resumen del contenido incluido en la página 2

KV Push Owner’s Manual CONTENTS SPECIFICATIONS AND SOUND/ VIBRATION ___ 3 INSTRUCTION LABELS 4 PACKING CHECKLIST & ASSEMBLY 5 OPERATION _6 MAINTENANCE AND TROUBLESHOOTING 7 ILLUSTRATED PARTS & PARTS LISTS 8-9 Go to http://www.billygoat.com for French-Canadian translations of the product manuals. Visitez http://www.billygoat.com pour la version canadienne-frança

Resumen del contenido incluido en la página 3

KV Push Owner’s Manual Specifications KV600 KV650H KV600FB KV650HFB Engine: HP 6.0 (4.47 kW) 6.5 (4.85kW) 6.0 (4.47 kW) 6.5 (4.85kW) Engine: Type B&S Quantum HONDA B&S Quantum HONDA Engine: Model 112K020124E1 GSV190AN1L 112K020124E1 GSV190AN1L Engine: Fuel Capacity 1.5 qt. (1.4 L) 1.6 qt. (1.5 L) 1.5 qt. (1.4 L) 1.6 qt. (1.5 L) Engine: Oil Capacity 0.63 qt. (0.6 L) 0.58 qt (0.54L) 0.63

Resumen del contenido incluido en la página 4

KV Push Owner’s Manual INSTRUCTION LABELS ® The labels shown below were installed on your BILLY GOAT KV Vacuum. If any labels are damaged or missing, replace them before operating this equipment. Item numbers from the Illustrated Parts List and part numbers are provided for convenience in ordering replacement labels. The correct position for each label may be determined by referring to the Figure and Item numbers shown. LABEL DANGER KEEP HANDS LAB

Resumen del contenido incluido en la página 5

KV Push Owner’s Manual PACKING CHECKLIST Your Billy Goat KV Vacuum is shipped from the factory in one carton, completely assembled except for the upper handle, debris bag, and bag quick disconnect. READ all safety instructions before assembling unit. TAKE CAUTION when removing the unit from the box the Handle Assembly is attached by cables and folded over PUT OIL IN ENGINE BEFORE STARTING PARTS BAG & LITERATURE ASSY Warranty card P/N- 400972, Owner’s Manua

Resumen del contenido incluido en la página 6

KV Push Owner’s Manual OPERATION VACUUMING OPERATION VACUUM NOZZLE HEIGHT ADJUSTMENT: Nozzle height is raised and lowered by rotating the red knob near the left rear wheel. Nozzle height should be adjusted based on the task being performed. FOR MAXIMUM PICKUP: Adjust nozzle close to debris, but without blocking airflow into the nozzle. NOTE: Never bury nozzle into debris. CLEARING A CLOGGED NOZZLE & EXHAUST: Turn engine off and wait for impeller to s

Resumen del contenido incluido en la página 7

KV Push Owner’s Manual MAINTENANCE PERIODIC MAINTENANCE Periodic maintenance should be performed at the following intervals: Maintenance Operation Every Use (daily) Every 5 hrs (daily) Every 25 Hours Inspect for loose, worn or damaged parts. Clean Debris bag Check bag strap tightness Engine (See Engine Manual) Check for excessive vibration IMPELLER REMOVAL 1. Wait for engine to cool and disconnect spark plug. 2. Drain fuel and oil from the engine.

Resumen del contenido incluido en la página 8

KV Push Owner’s Manual PARTS DRAWING KV Part No 891203 Form No F060911D 8

Resumen del contenido incluido en la página 9

KV Push Owner’s Manual PARTS LIST KV600/KV600FB KV650H/KV650HFB ITEM DESCRIPTION PART QTY PART QTY NO. NUMBER NUMBER 1 MAIN FRAME HOUSING NEW KD 891100-S 1 891100-S 1 2 NOZZLE ASSEMBLY TKV 891110-S 1 891110-S 1 3 AXLE WA KV MICRO 891138 1 891138 1 4 PLATE TOP ENGINE KV 891007-1-S 1 891007-1-S 1 5 IMPELLER 12.75 WA PUSH VAC 891108-S 1 891108-S 1 6 DOOR EXHAUST ASSY RAW 890148 1 890148 1 7 WASHER 1/2" SAE Z/P 8172011 4 8172011 4 8 WHEEL ASSY 12" X 2.5" TREAD 900509 4 900509 4