Resumen del contenido incluido en la página 1
1
2
OPTIONAL ACCESSORIES
INTAKE
HOSE COUPLER KIT 8" (203mm) TR
P/N 810525 Quick release coupler joins 2
hoses together to increase vacuuming
distance and allows hoses to be separated
for storage.
HOSE CONNECTOR KIT 8" (203mm) TR
P/N 810524
HOSE CONNECTOR KIT 10" (254mm) HTR
P/N 810776
For permanently connecting 2 hoses together
to increase vacuuming distance .
EXHAUST ALL MODELS
EXHAUST EXTENSION KIT P/N 810637
Increases exhaust height 11"(280mm) for
loading debris into elevated locations.
EXH
Resumen del contenido incluido en la página 2
5 IN THE INTEREST OF SAFETY BEFORE STARTING ENGINE, READ AND UNDERSTAND THE “ENTIRE OPERATOR'S MANUAL & ENGINE MANUAL.” THIS SYMBOL MEANS WARNING OR CAUTION. DEATH, PERSONAL INJURY AND/OR PROPERTY DAMAGE MAY OCCUR UNLESS INSTRUCTIONS ARE FOLLOWED CAREFULLY. The engine exhaust from this product contains chemicals known to the State WARNING! of California to cause cancer, birth defects or other reproductive harm. 21. DO NOT touch hot muffler, cylinder, or 13. DO NOT tamper with governor springs, f
Resumen del contenido incluido en la página 3
9 GENERAL SAFETY For your safety and the safety of others, these directions should be followed: Do not operate this machine without first reading ·DO NOT operate without discharging exhaust into enclosed owner's manual and engine manufacturer's manual. container. ·DO NOT operate during excessive vibration. Use of Ear Protection is recommended while ·DO NOT remove hose until engine has been turned off and has operating this machine. come to a complete stop. Use of Eye and Breathing prote
Resumen del contenido incluido en la página 4
12 13 CONTROLS PARTS BAG & LITERATURE ASSY P/N 811201 Throttle Controls Start Washer 5/16 Literature Checklist position 79 Fender Honda START 8172020 Qty. 4 Units have Check Owner's Owner's frame mounted Manual Manual throttle 811202 controls as Washer 5/16 SAE 4 shown 8172008 Qty. 4 Check here. Literature Literature Parts Bag Parts Bag Chain Loop Assy 811203 STOP 54 Nut Lock 1/4-20 810878 Qty. 2 52 8160001 Qty. 4 Stop position Check Literature Literature HTR / TR HTR / TR Briggs Vanguard Un
Resumen del contenido incluido en la página 5
16 OPERATION INTENDED USE: This machine is designed for vacuuming 16.6 HOSE OPERATION TIPS leaves, grass clippings and other types of organic litter. Debris mixed with cans, bottles and small amounts of sand can be vacuumed; however, it is not this machine's primary THE HOSE IS A REPLACEABLE WEAR ITEM. purpose. Vacuuming cans, bottles and sand will affect the longevity of your machine. FOR BEST HOSE OPERATION RESULTS, FOLLOW THESE Do not operate if excessive vibration occurs. If excessive RECO
Resumen del contenido incluido en la página 6
OPERATION continued 16 16.6 HOSE OPERATION TIPS continued UNCLOGGING A CLOGGED HOSE: With engine running and unit secured to tailgate, fully stretch hose in a straight line to dislodge the clog. If the clog will not clear, turn unit off, and allow engine to come to a complete stop. Remove hose and manually clear hose clog. UNCLOGGING A CLOGGED HOUSING OR EXHAUST ELBOW: Turn engine off and wait for impeller to come to a complete stop. Disconnect spark plug wire. Danger, the clog may contain s
Resumen del contenido incluido en la página 7
OPERATION continued 16 16.4 HANDLING & TRANSPORTING: ALWAYS REMOVE LOADER FROM TAILGATE OR MOUNT- ING BEFORE TRANSPORTING OR OPENING TAILGATE. Using two people to lift machine is recommended. Lift holding the rear handle and front of frame. Secure in place during transport. HOSE: DO NOT drag the hose with vehicle. 16.5 STORAGE Turn fuel supply off when unit is not in use. Never store engine indoors or in enclosed poorly ventilated areas with fuel in tank, where fuel fumes may reach an open fl
Resumen del contenido incluido en la página 8
17 MAINTENANCE 17.1 IMPELLER REMOVAL Use only a qualified mechanic for any adjustments, disassembly or any kind of repair . 1. Wait for engine to cool and disconnect spark plug. 2. Disconnect hose from unit. 3. Remove boom assembly. WARNING: TO AVOID PERSONAL INJURY, ALWAYS 4. Remove cable assy. interlock (item 43), from front plate of TURN MACHINE OFF, MAKE SURE ALL MOVING assembly (item 41). PARTS COME TO A COMPLETE STOP. 5. Remove front plate assembly (item 41). 6. Remove impeller bolt
Resumen del contenido incluido en la página 9
17 MAINTENANCE continued Follow these hourly 17 .3 INTERLOCK SYSTEM 17 . 2 Maintenance Schedule maintenance intervals. Every Every 5 hrs Every 10 Every 25 Maintenance Operation Use or (Daily) hrs hrs With hose coupler installed (as shown in Fig. 4) the switch is open & engine is not grounded out, allowing engine to run. Engine (See Engine Manual) Check for excessive vibration HTR1803V SYSTEM Clean Hose INTERLOCK Keep engine free of debris SWITCH Spark Plug Inspect for loose parts Item 43 Insp
Resumen del contenido incluido en la página 10
A SEE PAGE 9 MAINTENANCE 18 PARTS DRAWING HTR1803V, TR1304H, TR1104 Page 10 of 12 Part No. 811202 Form No. F022404A
Resumen del contenido incluido en la página 11
19 * Denotes standard Parts List Denotes parts found in hardware item that may parts bag assembly. be purchased locally. HTR1803V TR1304H TR1104 ITEM DESCRIPTION QTY QTY QTY PART NO. PART NO. PART NO. 1 FLAPPER 10" INTAKE W/LABEL 811183 1 - - - - - - - - - - FLAPPER 8" INTAKE W/ LABEL - - - - - 811174 1 811174 1 2 NUT LOCK 10-24 - - 8164005 2 8164005 2 3 LABEL DANGER KEEP HANDS AND FEET AWAY 400424 2 400424 2 400424 2 4 WASHER 5/16 SAE (11/32 ID x 11/16 OD x 1/16) *8172008 13 *8172008 11
Resumen del contenido incluido en la página 12
19 * Denotes standard Parts List hardware item that may continued from be purchased locally. page 11. HTR1803V TR1304H TR1104 ITEM DESCRIPTION QTY QTY QTY PA RT NO . PA RT NO . PA RT NO . 64 W A SHER LO CK 3/8 *8177012 2 *8177012 2 - - - - W A SHER LO CK 5/16 EXT. TO O TH - - - - - - - - *8181008 2 65 SCREW CA P 3/8 - 16 X 1 *8041050 2 - - - - - - - - - - SCREW CA P 3/8 - 16 X 1 1/2 Z P - - - - - 8041052 2 8041052 2 66 SCREW CA P 3/8 - 16 x 1" *8041050 12 *8041050 12 *8041
