Resumen del contenido incluido en la página 1
Register your product
Prestigo SRT9320
and get support at
www.philips.com/welcome
EN User Manual
Resumen del contenido incluido en la página 2
IR transmitter (Top of Prestigo) Table of contents 1 Your Prestigo 3 1.1 What’s in the box? 3 2 Getting started 3-6 2.1 Charging the battery 3-4 2.2 Setting up the remote control 4-5 Display / touchscreen 2.3 Exit Setup mode 6 3 Using the remote control - Basic operation 6-7 3.1 Selecting devices 6-7 4 Extra possibilities - Advanced setup 7-20 On / Off switch 4.1 Entering Setup mode 7 (Rear of Prestigo) 4.2 Setting up devices 8-9 - Power button 4.3 Setting up act
Resumen del contenido incluido en la página 3
1 Your Prestigo 1.1 What’s in the box Please verify that the packaging contains the following items: After setting up the Philips Prestigo universal remote control you can • Prestigo SRT9320 universal remote control operate up to 20 different devices with it, use up to 20 activities and select • User manual a total of 100 favorites. • Quick Start Guide Favorites are your favorite TV and radio channels that you can select and • Customer Demonstration sheet watch / listen with a single button p
Resumen del contenido incluido en la página 4
Setup English Français Español Deutsch 1 Select the adapter plug for your • When the batter y is fully charged the battery full icon ( ) country and slide it over the power appears at the top right corner of the screen. plug of the charging cable. Notes • Operation time of a fully charged battery is approximately 1 month but also depends on the intensity of usage. When the battery is almost empty the OR: battery low icon ( ) flashes in the top right corner of the screen. Fold out t
Resumen del contenido incluido en la página 5
Setup Welcome to the Prestigo setup guide. The next steps will help you add devices to your SRT9320. 2 Touch the button to continue Digital Media Receiver Digital Media Receiv er, Media Adapter, Squeezebox With the button you go back Receiver AV Receiver, Amplifi er + Tuner combination, sound to the Language Selection screen. processor Home Theatre System Home Theatre System, Home Entertainment System Audio System Audio System, AudioSet, Hifi system Amplifi er Amplifi er, Preamplifi er,
Resumen del contenido incluido en la página 6
Home Devices Activities TV Set-top Box DVD Receiver Keypad Favorites 1 2 3 4 5 6 7 8 9 enter 0 2.3 Exit Setup mode 3.1 Selecting devices 1 To exit the initial Setup at any time, 1 Press the HOME button. press the HOME button. • The Home screen appears. • The message ‘Do you want to The ‘Devices’ tab is highlighted save your settings and exit setup’ and the devices for which the appears. remote control is set up are 2 Touch the ‘Yes’ button to exit. displayed. For adding devices, • I
Resumen del contenido incluido en la página 7
3 You can now operate the selected device by using the touchscreen 4 Extra possibilities buttons (keypad) and the appropriate hard buttons on the remote - Advanced setup control. • Touch the button to go back to the list of available devices. • To set up the remote control for other (more) devices, refer to 4.1 Entering Setup mode chapter 4.2.1 ‘Adding devices’. When in normal operation mode, pressing the HOME button for 3 seconds will display a toolbar. This toolbar enables you to c
Resumen del contenido incluido en la página 8
Home Devices Activities Watch TV Listen to music Watch a movie Play a game Receiver 4.2.2 Deleting devices 4.2 Setting up devices When entering setup mode from the devices home screen, you can add, 1 In the list of devices, select the device you wish to delete. delete, rename and rearrange devices. • The Delete device screen appears. 1 In the Home screen, touch 2 Touch the button in the toolbar. the ‘Devices’ tab. 3 Touch the ‘Yes’ button to confirm. • The devices f or which the 4 Touch t
Resumen del contenido incluido en la página 9
4.2.4 Copy volume buttons from another device 4.2.5 Rearranging devices 1 In the list of devices, select the device you wish to rearrange. When adding devices, the remote control copies the volume settings as 2 Touch the button in the toolbar. follows: 3 Use the arrows to move the device to the preferred position. • If a device has its own volume buttons in the remote control database, 4 Touch the button in the toolbar when finished. these volume buttons will be used. • The Home screen ap
Resumen del contenido incluido en la página 10
If you do not set up start / stop macros, all devices have to be turned on / It might occur that input names used by the remote control differ from the off manually one after another. This can be easily done by pressing the ‘On’ names used on your device (e.g. ‘Input 1’ could be ‘HDMI’, ‘Input 2’ could be and ‘Off’ buttons in the Power screen that appears after selecting the activity. ‘RGB’, etc.). Try all input commands and check whether your device reacts. • Touch the ‘Yes’ button when you
Resumen del contenido incluido en la página 11
Home Devices Activities Watch TV Listen to music Watch a movie Play a game Watch a movie Play a game Testing 4.3.2 Deleting activities It is advised to test an activity macro twice, before actually using it. If, in the second test, the macro behaves different than in the first test, 1 Select an activity and follow the on-screen instructions. you may have included cyclic codes for A/V input selection or you did not 2 Touch the button in the toolbar. include enough delay times. In this case, a
Resumen del contenido incluido en la página 12
Power TV On DVD On Radio Off Home Devices Activities Watch TV Listen to music Watch a movie Play a game • If a ‘Start Activity’ macro has been set up for the activity, the macro 4 Use the and buttons in the toolbar to add / delete macro will be executed when selecting the activity in the Home screen. buttons. Use the button in the toolbar to adapt delay times and All activity devices will be turned on automatically and the required button press duration. This may be necessary to turn o
Resumen del contenido incluido en la página 13
Watch TV Keypad Favorites 2 3 1 4 5 6 7 8 9 enter 0 Discovery Channel RTL 2 Touch the Off buttons to turn off 4.5.1 Adding favorites the devices. 1 Touch the button in the toolbar. 2 Use the keyboard to enter the name of the favorite channel you wish to add and touch the ‘OK’ button. • The remote control no w checks if the favorite channel name and icon are available in the internal database. 3 Follow the on-screen instructions to select the channel name and assign button presses to it.
Resumen del contenido incluido en la página 14
5 Touch the ‘OK’ button when finished. 1 In the list of favorites, navigate to the page which contains the favorite • The Setup screen appear s. for which you wish to change the channel number. 6 Touch the button in the toolbar. 2 Keep the HOME button pressed for 3 seconds to enter Setup mode. • The last used Fa vorites screen appears. 3 Select the favorite you wish to edit. The favorite is now stored under the new name. 4 Touch the button in the toolbar. • The Edit fa vorite screen app
Resumen del contenido incluido en la página 15
Discovery Channel RTL Watch TV Keypad Favorites CNN MTV Discovery Channel RTL 7 Use the ‘+’ and ‘–’ buttons to adjust delay times and channel press 4.7 Reconfi guring buttons duration. Follow the on-screen instructions. 8 Touch the button in the toolbar when finished. The remote control is equipped with the most used functions for operating • The Setup screen appear s.The new delay times and / or button your devices. However, if you miss certain functions from your original press duratio
Resumen del contenido incluido en la página 16
4.7.2 Editing activity buttons 3 Touch the ‘Rename’ button. 4 Use the keyboard to enter the new name. 5 Touch the ‘OK’ button when finished. Buttons within an activity can be edited afterwards. • The Setup screen appear s. For activities, refer to chapter 4.3 ‘Setting up activities’. 6 Touch the button in the toolbar when finished. For deleting, rearranging, renaming, fixing and learning buttons, • The last used Setup screen appear s. refer to the relevant chapters in 4.7 ‘Reconfiguring
Resumen del contenido incluido en la página 17
4.7.4.2 Learning button functions When a button could not be found in the remote control database you can learn the remote control the function from the original remote control. Note Any function already stored under a button will be will be overwritten by the new function. Tips on learning button functions 2 Touch the button in the toolbar. • The Edit button screen appears. • Some functions of some types of remote control might not be learned. 3 Press / touch the (hard) button that you wis
Resumen del contenido incluido en la página 18
Receiver AV DVD On DVD Off 4.7.5 Rearranging buttons 3 Keep the HOME button pressed for 3 seconds. 1 Select the button you wish to rearrange. • The Setup screen appear s. 2 Touch the button. 4 Select the On or Off button you 3 Use the arrows to move the favorite to the preferred position. wish to change. 4 Touch the button when finished. 5 Follow the on-screen instructions. • The last used Setup screen appear s. 6 Touch the button in the toolbar when finished. 4.8 Reconfi guring
Resumen del contenido incluido en la página 19
Home Devices Activities Watch TV Listen to music x W DVD Receiver - Language: selects English, French, Spanish, 6 Touch the button in the toolbar when finished. German, Dutch, Portuguese, Italian or • The P ower screen appears. The new button is now added. Russian language. - Brightness: sets the br ightness of the display. 4.9 Adjusting system settings - Backlight time-out: sets the time f or the display illumination to turn off. In the System settings menu you can adjust a number of
Resumen del contenido incluido en la página 20
1 Place the installation CD-ROM supplied in your PC’s/laptop’s CD-ROM/ 5 Frequently asked questions DVD drive. • The PrestigoSync Install Wizard In this chapter you find answers to the most frequently asked questions screen appears. If the screen about your universal remote control. does not appear automatically, open ‘My computer’ double click on the CD-ROM, then double Setup click the ‘Setup.exe’ icon. I cannot enter ‘Setup’ mode. 2 Click the ‘Next’ button and follow the on-screen
