Resumen del contenido incluido en la página 1
Using the remote controller
Overview
When you use a remote controller, typically you press one of the MODE buttons that corresponds to the device you wish to control, then
press the operation buttons. For example, if you wish to control the TX-DS575 from a remote controller, first press the MODE AUDIO but-
ton, then press an appropriate operation button. To control a CD player, press the MODE CD button, then press an appropriate operation but-
Resumen del contenido incluido en la página 2
Using the remote controller Controlling an Onkyo CD player Note: First connect an Onkyo CD player using the connection. 1. Press the MODE CD button. 2. Press the desired CD operation button. MODE CD TRACK : Selecting a track DISC : Selecting a disk in the CD changer :Down :Up : Playback : Stop : Rewind : Fast forward CD : Pause operation EJECT :Eject buttons 0, 1~9, +10 : Numeric keys You may also use the following buttons: VOL q/u : Adjusting the volume level of the
Resumen del contenido incluido en la página 3
Using the remote controller Controlling an Onkyo MD recorder Note: Make sure that you point the transmission part on the remote con- troller toward the sensor area on the MD recorder. 1. Press the MODE MD/AUX button. 2. Press the desired MD operation button. MODE MD Turning the power on and off to the MD recorder POWER ON/STNBY : Turning on or standby the power to the MD recorder :Down :Up : Playback : Stop MD operation : Rewind buttons : Fast forward : Record REC : Pause EJECT :Eject 1~9, +10 :
Resumen del contenido incluido en la página 4
Programming the remote controller codes of other devices into the RC-391M The RC-391M has two learning functions. One is a normal learning function that enables the RC-391M to learn other remote controllers’ codes. The other is a macro learning function, which enables the RC-391M to learn a series of codes already memorized in the remote con- troller into one MACRO button. Programming procedure Program the codes for each mode (AUDIO, CD, DVD, MD, SAT, CABLE, VCR, and TV). Light 4 1 6 5 to 15 cm
Resumen del contenido incluido en la página 5
Programming the remote controller codes of other devices into the RC-391M See page 39 for information on how to erase the learned codes from all buttons. Erasing a learned code SEND/LEARN You can erase a learned code. You cannot erase preset codes. indicator • Erasing a code programmed in a button 1. Press and hold down the corresponding MODE button and press the ENT button, then release the buttons. When you press the MODE button, the SEND/LEARN indica- MODE tor lights up. When you press the EN
Resumen del contenido incluido en la página 6
Using a Macro function What is a Macro function? A Macro function enables you to program a series of button operations on the remote controller into a single button. For example, you need to follow the steps below to play a CD player connected to the TX-DS575 without using the Macro function: 1: Press the MODE AUDIO button. fi 2: Press the POWER ON button. fi 3: Press the CD (INPUT SELECTOR) button. fi 4: Press the MODE CD button. fi 5: Use the numeric keys to select the desired song. This operation
Resumen del contenido incluido en la página 7
Using a Macro function Macro Direct Learning function A series of remote controller button operations can be memorized into the MACRO DIRECT button for one-touch control. Note: You can program only one series of button operations into the MACRO DIRECT button. 1. Press and hold down any one of the eight MODE buttons and press the MACRO DIRECT button. Then, release the buttons. 1, 3 When you press the MODE button, the SEND/LEARN indica- 1 tor lights up. When you press the MACRO DIRECT button, the
Resumen del contenido incluido en la página 8
Using a Macro function Erasing a learned remote controller button oper- ation from the MACRO MODE buttons 1. Press and hold down the corresponding MODE button and press the MACRO MODE button, then release the buttons. When you press the MODE button, the SEND/LEARN indica- tor lights up. When you press the MACRO MODE button, the 1, 2 indicator turns off. When you release the buttons, the indicator flashes once. 1 2. Press the MACRO MODE button again. The SEND/LEARN indicator flashes twice slowly. T
Resumen del contenido incluido en la página 9
Using a Macro function Erasing all codes and operations programmed in the buttons This procedure will erase all remote controller codes for the other devices and all macro operations that have been programmed in the 2 RC-391M (see pages 34, 36 and 37). 1. Open the battery cover and remove the batteries. 2. While pressing and holding down the POWER ON button and the POWER STNBY button, insert the batteries in the correct direction. After inserting the batteries, release the buttons. The SEND/ LE
