Resumen del contenido incluido en la página 1
Owners Manual
Model FRS-WP1
Two Way Family Radio
with Headset and
Boom Microphone
CALL
VOL VOX
HI
LOW
OFF
Customer Service
1-800-290-6650
PUSH TO
TALK
Resumen del contenido incluido en la página 2
FEATURES Your FRS-WP1 Family Radio is a portable, easy to use, two-way radio that you can carry almost anywhere. It is skillfully constructed to give you reliable communications and FM radio listening enjoyment. It is intended for use with the supplied headset assembly with PTT switch. When used in this manner, the FRS-WP1 is ideal for hands-free use around the house, in your boat, on hunting and camping trips, on the ski slopes or at the mall. Some of the FRS-WP1 features are: No Air Time Fees
Resumen del contenido incluido en la página 3
PERFORMANCE Your transceiver will achieve its maximum operating range when communi- cating with other transceivers in a flat open area with no trees or buildings obstructing its signal. Range may be up to two miles under such conditions. Obstacles such as buildings, trees or mountains will tend to reduce the transceivers effective range. FCC WARNING Replacement or substitution of transistors, diodes or other parts of a unique nature, with parts other than those recommended by the manufacturer
Resumen del contenido incluido en la página 4
FUNCTION AND LOCATION OF THE CONTROLS 2 TO 56 REF HEADSET SPK MIC 3 REF 7 4 3 6 REF 15 8 14 2 9 CALL VOL VOX HI 13 LOW OFF 10 1 12 11 1. Battery Compartment Cover: Four (4) AAA batteries acces- sible when cover is removed. 2. Carry Clip Stud: Attaches to carry clip. 3. Headset PTT Switch: With unit VOX switch set to OFF, press to transmit; release to receive. -4- PUSH TO TALK
Resumen del contenido incluido en la página 5
4. Lapel/Clothes Clip: Attaches headset PTT switch to convenient area. 5. Headset Microphone/Speaker Plug: Connects headset assembly to SPK/MIC jack on radio. 6. Headset SPK/MIC (CHG) Jack: For use with the supplied Audiovox headset assembly; accepts headset connector plug (5). Also accepts wall charger (sold separately) DC input for battery charging. 7. Antenna 8. LCD Display: Displays the current FRS channel number as well as various control function indications. 9. Monitor/FM (MON/FM) Button:
Resumen del contenido incluido en la página 6
POWERING THE TRANSCEIVER Your FRS-WP1 radio transceiver operates on four AAA batteries. Alkaline batteries will provide slightly better performance than rechargeable batteries and will ensure optimum performance for the FRS-WP1. Batteries There are three methods of powering the FRS-WP1: 1.Alkaline Batteries. WARNING: Do not attempt to recharge Alkaline batteries. 2.Audiovox Rechargeable Ni-MH Batteries - (Rechargeable NiMH batteries (P/N FRSRBAT) and Charging Adapter (Model No. YKA3515-08010) s
Resumen del contenido incluido en la página 7
BATTERY INSTALLATION SPRING EMBOSSED LATCH ARROW CARRY CLIP MOUNTING STUD + + CARRY CLIP BATTERY COVER + + Your FRS-WP1 requires four AAA cells. Alkaline batteries will provide the best performance from your transceiver. CAUTION: Incorrect battery installation can damage the unit. Never attempt to charge alkaline batteries. 1.Press down on the spring latch securing the clip to radio and slide the clip downward and away from the mounting stud. 2.At battery cover, press downward with thumb on
Resumen del contenido incluido en la página 8
The following guidelines will improve performance and provide longer operat- ing times for the FRS-WP1: 1. Do not mix old and new batteries. 2. The use of alkaline-type batteries is recommended to provide the longest operating time. 3. Do not mix alkaline, standard (carbon-zinc) or rechargeable batteries. 4. If the unit is not to be used for an extended period of time, remove the batteries. Old or leaking batteries can cause damage to the unit and will void the warranty. SPK/MIC (CHG) JACK RED C
Resumen del contenido incluido en la página 9
USING YOUR FRS-WP1 Turning the Transceiver On and Off ( ) Pressing the Power button (10) for 2 seconds will activate the unit and the self-test display momentarily appears followed by the frequency standby display. The headphones will sound a short melody to confirm the transceivers activation and the LCD backlight will come on for about 2 seconds. To turn the unit off, simply press and hold the power button for 2 seconds then release it; a short tone will be heard as the unit powers off. Volu
Resumen del contenido incluido en la página 10
FUNCTIONS Channel Selection Momentarily press the CH button so the two-digit channel display flashes. Press the VOL Up ( ) or Down ( ) button to select the desired channel (0114). VOX Function This feature enables you to have hands-free conversation. To enter the VOX mode: 1.With the headset plugged into the SPK/MIC jack on the radio, from the FRS standby mode, position the VOX switch to the HI or LOW position from the OFF position. 2. When using the headset microphone, your voice signal is
Resumen del contenido incluido en la página 11
Using the Monitor (MON) Button To listen to channel activity with the squelch bypassed: 1. With the radio in the FRS standby mode, momentarily press the MON button; the radio will enter the monitor receive mode as indicated by the background noise. 2. To exit the monitor mode, momentarily press the MON button again; the radio will return to the FRS standby mode. FM Radio Selection To access the FM mode: 1. With the radio in the FRS standby mode, press and hold the MON button; the FM radio (Fr)
Resumen del contenido incluido en la página 12
Button Confirmation Tone Whenever the VOL/Channel Up/Down or MON/FM buttons are pressed, the speaker will sound a beep tone to confirm each press. In addition, when the Channel (CH) button is pressed, a confirming tone melody sounds. To Transmit: 1. Set the desired primary channel. 2. Press and hold the headset Push-to-Talk (PTT) button while speaking slowly and clearly in a normal voice into the headset microphone. 3. The LCD backlight will come on while transmitting. 4. Release the PTT button
Resumen del contenido incluido en la página 13
WARNING ! Remove the batteries from the transceiver if it is not expected to be used for long periods. This will eliminate the possibility of battery acid leaking from the batteries and corroding the transceiver. ! Avoid exposing the unit to water or extremes of temperature. ! Do not use this device in or near a mining facility, which uses remotely triggered explosives or in areas labeled Blasting Area. Premature or accidental detonation may result. ! Do not attempt to modify or in any way in
Resumen del contenido incluido en la página 14
SPECIFICATIONS* Channels: 14 Battery Life: (5%: Rx, 5%:Tx, 90% Standby) Alkaline 30 - 36 Hours Power Source 6.0 Vdc Receiver: 1. Sensitivity -120dBm Min. 2. Max. audio output @ 10% THD 110 mV 3. Max. S/N ratio @ 1mV RF input 40 dB Min. 4. Squelch Sensitivity Threshold -120 dBm Min. 5. Adjacent Channel Selectivity 50 dB MIn. Transmitter: 1. Maximum Effective Radiated Power 500 mW 2. Audio Distortion 3 % 3. Hum and Noise 35 dB Min. * These specifications are subject to change without notice. They
Resumen del contenido incluido en la página 15
Channel Frequencies: Channel MHz Channel MHz 1 462.5625 8 467.5625 2 462.5875 9 467.5875 3 462.6125 10 467.6125 4 462.6375 11 467.6375 5 462.6625 12 467.6625 6 462.6875 13 467.6875 7 462.7125 14 467.7125 FM Radio Frequencies: Frequency Band: 87.5 MHz - 108 MHz -15-
Resumen del contenido incluido en la página 16
90 DAY LIMITED WARRANTY Applies to Audiovox Family Radio Service Products. AUDIOVOX CORPORATION (the Company) warrants to the original retail purchaser of this product that should this product or any part thereof, under normal use and conditions, be proven defective in material or workmanship within 90 days from the date of original purchase, such defect(s) will be repaired or replaced with new or reconditioned product (at the Company's option) without charge for parts and repair labor. To obtai
