Manual de instrucciones de JL Audio Stealthbox SB-T-4RNR/10W1v2/GA

Resumen del contenido incluido en la página 1

SB-T-4RNR/10WØ Stealthbox™
Fits 1996 - 1999 Toyota 4Runner
Installation Guide:
This Stealthbox is a product which requires professional installation skills and tools. Please read this
installation guide thoroughly before beginning the project. It will guide you step by step through the
installation. Several of the steps in this process may require two people to accomplish.
It is absolutely vital that the enclosure be properly mounted to the vehicle according to these instru

Resumen del contenido incluido en la página 2

STEP 3: Thread the supplied 3/8" x 1 1/4" bolt into the Stealthbox. Tighten fully. STEP 4: Place the Stealthbox into its mounting position. When placing the Stealthbox, lift the inside edge (speaker baffle side) to prevent dragging the bolt across the wax square. Press down firmly to leave a clear impression in the wax. STEP 5: Remove the Stealthbox. There should be an indention in the wax square. Caution: Before drilling check under the vehicle for any brake lines, fuel lines or other potenti

Resumen del contenido incluido en la página 3

Threaded Insert Enclosure Wall (fiberglass) Molded into Enclosure STEP 11: While one person adjusts the position of the Stealthbox from inside the vehicle, a second person should bolt the Stealthbox into place using the supplied hardware. Before tightening the bolt apply a bead of silicone sealant between the two flat fender washers and the vehicle's floor pan. Flat Washer Car's Sheet Metal Then tighten the bolts fully. See diagram at right: Bead of Silicone Sealant Split Lock Washer 3/8" Bol

Resumen del contenido incluido en la página 4