Resumen del contenido incluido en la página 1
DX-WD1201_11-0421_MAN_V3_English.fm Page 1 Friday, April 29, 2011 10:57 AM
ASSEMBLY INSTRUCTIONS
DX-WD1201
Espresso TV Stand for 32" TVs
Safety information and specifications ............2
Tools needed ............................................................3
Package contents ...................................................4
Assembly instructions...........................................6
Resumen del contenido incluido en la página 2
DX-WD1201_11-0421_MAN_V3_English.fm Page 2 Friday, April 29, 2011 10:57 AM 2 DX-WD1201 Safety information and specifications Maximum weight: 95 lbs. (43.09 kg) CAUTION: Maximum screen size: Most 32" flat-panel TVs This stand’s work surface is intended only for use Weight capacity (top of stand): 95 lbs. (43 kg) with a product not weighing more than 95 lbs. Weight capacity (top shelf): 35 lbs. (15 kg) (43.09 kg) and accommodates most 32" Weight capacity (middle shelf ): 25 lbs. (11 kg) flat
Resumen del contenido incluido en la página 3
DX-WD1201_11-0421_MAN_V3_English.fm Page 3 Friday, April 29, 2011 10:57 AM DX-WD1201 3 Tools needed No. 2 Phillips screwdriver Caution: Do not Hammer use an electric drill or screwdriver Flatblade screwdriver Need help? Call 800-305-2204
Resumen del contenido incluido en la página 4
DX-WD1201_11-0421_MAN_V3_English.fm Page 4 Friday, April 29, 2011 10:57 AM 4 DX-WD1201 Package contents Package contents: hardware Make sure you have all the hardware necessary to assemble your new TV stand: Label Hardware Qty. Label Hardware Qty. Rubber Q4 Hidden cam M17 sleeve R13 Cam cover Cam dowel N17 Warning S1 Angle label O3 bracket P6 Metal pin Label Hardware Qty. T2 Black 1-7/8”flat head screw U6 Black 9/16” large head screw V24 Nail 12 3 4in 10 20 30 40 50 60 70 80 90 100mm Need
Resumen del contenido incluido en la página 5
DX-WD1201_11-0421_MAN_V3_English.fm Page 5 Friday, April 29, 2011 10:57 AM DX-WD1201 5 Package contents: parts Note: All parts except for the back (G) have a lettered sticker to make identifying parts easier. Letter Description Qty. Letter Description Qty. Right end 1 Back A G 1 Left end 1 Adjustable shelf B H 1 Upright 1 Stop molding C I 1 Top 1 Top skirt D J 1 Bottom 1 Bottom molding E K 1 Shelf 1 End molding F W 2 Need help? Call 800-305-2204
Resumen del contenido incluido en la página 6
DX-WD1201_11-0421_MAN_V3_English.fm Page 6 Friday, April 29, 2011 10:57 AM 6 DX-WD1201 Assembly instructions Step1: A hidden cam (M) has an arrow. When you insert the hidden cam, make sure that the arrow points toward the hole in the side of the part you are inserting it into. Assemble your stand on a carpeted floor or on the empty carton to avoid scratching your unit or the floor. Push seventeen hidden cams (M) into the ends (A and B), top (D), bottom (E), and shelf (F). Then, insert a cam
Resumen del contenido incluido en la página 7
DX-WD1201_11-0421_MAN_V3_English.fm Page 7 Friday, April 29, 2011 10:57 AM DX-WD1201 7 Tightening hidden cams: In the remaining steps, use these illustrations for instructions on tightening hidden cams. Warning: Risk of damage or injury. Hidden cams must be completely tightened. Hidden Cams that are not completely tightened will loosen, and parts may separate. Arrow Make sure that you turn the hidden cam 210°. Note the position of the arrow on the hidden cam. Arrow 210° In the illustratio
Resumen del contenido incluido en la página 8
DX-WD1201_11-0421_MAN_V3_English.fm Page 8 Friday, April 29, 2011 10:57 AM 8 DX-WD1201 Step 2: Fasten the shelf (F) to the ends (A and B). Use a flatblade screwdriver to tighten four hidden cams (M). See “Tightening hidden cams:” on page 7. Insert two metal pins (P) into the upright (C), then insert the other ends of metal pins (P) into the holes in the shelf (F). Notched edge Finished edge Notched edge Surface with holes Arrow 210° You’ll need: Flatblade screwdriver P (2) Need help? Call
Resumen del contenido incluido en la página 9
DX-WD1201_11-0421_MAN_V3_English.fm Page 9 Friday, April 29, 2011 10:57 AM DX-WD1201 9 Step 3: Slide the bottom molding (K) onto the notched edge of the bottom (E). Fasten the bottom (E) to the ends (A and B). Use a flatblade screwdriver to tighten four hidden cams (M). See “Tightening hidden cams:” on page 7. Fasten the bottom (E) to the upright (C). Use a Phillips screwdriver and two black 1-7/8" flat head screws (T). fi Surface with hidden cams US Patent #5,499,886 Holes for screws Arro
Resumen del contenido incluido en la página 10
DX-WD1201_11-0421_MAN_V3_English.fm Page 10 Friday, April 29, 2011 10:57 AM 10 DX-WD1201 Step 4: Fasten three angle brackets (O) to the stop molding (I). Use a Phillips screwdriver and three black 9/16" large head screws (U). Fasten the stop molding (I) to the top (D). Use a flatblade screwdriver to tighten three hidden cams (M). See “Tightening hidden cams:” on page 7. Carefully turn your stand onto its top. Fasten the ends (A and B) to the top (D). Use a flatblade screwdriver to tighten
Resumen del contenido incluido en la página 11
DX-WD1201_11-0421_MAN_V3_English.fm Page 11 Friday, April 29, 2011 10:57 AM DX-WD1201 11 Step 5: Slide the end moldings (W) onto the notched edges of the ends (A and B). Fasten the top skirt (J) to the angle brackets (O) on the stop molding (I). Use a Phillips screwdriver and three black 9/16" large head screws (U). Note: There are no pre-drilled holes in the top skirt (J). The screws will tighten into the groove. You’ll need: Phillips screwdriver U (3) Need help? Call 800-305-2204
Resumen del contenido incluido en la página 12
DX-WD1201_11-0421_MAN_V3_English.fm Page 12 Friday, April 29, 2011 10:57 AM 12 DX-WD1201 Step 6: Carefully turn your stand over onto its front edges. Unfold the back (G) and lay it over your stand. Make equal margins along the side and bottom edges of the back (G). Push on opposite corners of your stand if needed to make it “square.” Fasten the back (G) to your stand using the nails (V). Note: Make sure that you tap nails into the holes that line up over the upright (C) and shelf (F). Note:
Resumen del contenido incluido en la página 13
DX-WD1201_11-0421_MAN_V3_English.fm Page 13 Friday, April 29, 2011 10:57 AM DX-WD1201 13 Step 7: Carefully stand your stand upright. Push the rubber sleeves (Q) over the remaining metal pins (P). Insert the metal pins (P) into the hole locations of your choice in the right end (A) and upright (C). Set the adjustable shelf (H) onto the metal pins (P). Apply the warning label (S) to the top (D). You should be able to read the label when the TV is removed from your stand. When the TV is in pl
Resumen del contenido incluido en la página 14
DX-WD1201_11-0421_MAN_V3_English.fm Page 14 Friday, April 29, 2011 10:57 AM 14 DX-WD1201 Still need help? For customer service, call: 800-305-2204 (U.S./Canada markets) Distributed by Best Buy Purchasing, LLC 7601 Penn Avenue South, Richfield, MN USA 55423-3645 © 2011 BBY Solutions, Inc. All rights reserved. DYNEX is a trademark of BBY Solutions, Inc. Registered in some countries. All other products and brand names are trademarks of their respective owners. Need help? Call 800-305-2204
Resumen del contenido incluido en la página 15
DX-WD1201_11-0421_MAN_V3_English.fm Page 16 Friday, April 29, 2011 10:57 AM Certificate of Conformity 1. This certificate applies to the Sauder Woodworking Product identified by this instruction booklet. 2. This certificate applies to the compliance of this product with the CPSC Ban on Lead-Containing Paint (16 CFR 1303). 3. This product was manufactured by: Sauder Woodworking Company 502 Middle Street Archbold, Ohio 43502 (419) 446-2711 4. Date of Manufacture: _________________ Lot numbe
