Manual de instrucciones de JL Audio Stealthbox SB-H-CRV/10W3v3/GA

Resumen del contenido incluido en la página 1

SB-H-CRV/10W3V3 INSTR_SKU#011281
Installat Ion

d I F F I C u l t Y :

If you choose to perform the installation yourself, it is absolutely vital that
®
out
the Stealthbox be properly mounted to the vehicle according to these
o F
instructions. Failure to mount the enclosure properly presents two problems:
I n s t a l l a t I o n G u I d e
for the 1) The sub-bass performance will suffer due to the movement of the enclosure
35
caused by the force exerted by the woofer(s).
SB-H-CRV/10W

Resumen del contenido incluido en la página 2

SB-H-CRV/10W3V3 INSTR_SKU# 011281 s t e P 4 S T E P 8 Remove the enclosure, ensure that an adequate depression Insert the Spacer over the Hex Head Bolt, through the 1” hole has been made in the Wax Square to use it as a guide to in the interior plastic trim panel so that it will rest against the drill a hole. If the impression is not present, back the bolt metal interior fender panel. out of the enclosure and, repeat ste P 3 untill there is a well defined impression in the Wax Square. s t

Resumen del contenido incluido en la página 3

SB-H-CRV/10W3V3 INSTR_SKU# 011281 I n C l u d e d H a R d W a R e 1) 3/8” Split Lock Washer 1) 3/8” x 1 1/4” Fender Washer 1) 3/8-16 x 2 1/2” Hex Head Bolt 1) 3/8”(ID) x 1”Steel Spacer s P e C I F I C a t I o n s Enclosure Type: Acoustic Suspension (sealed) Driver Type: 10W3v3-4 Nominal Impedance: 4 Ohms Continuous Power Handling: 500 Watts P o W e R R e C o m m e n d a t I o n JL Audio recommends using a high quality amplifier such as the JL Audio 250/1v2. The diagram below shows the r