Manual de instrucciones de JL Audio Stealthbox SB-GM-CTRIP/10W3v3/UF

Resumen del contenido incluido en la página 1

SB-GM-CAM/10W3v3 INSTR_SKU# 011302
Installat Ion

d I F F I C u l t Y :

If you choose to perform the installation yourself, it is absolutely vital that
®
out
the Stealthbox be properly mounted to the vehicle according to these
o F
instructions. Failure to mount the enclosure properly presents two problems:
I n s t a l l a t I o n G u I d e
for the 1) The sub-bass performance will suffer due to the movement of the enclosure
15
caused by the force exerted by the woofer(s).
SB-GM-CAM/

Resumen del contenido incluido en la página 2

SB-GM-CAM/10W3v3 INSTR_SKU# 011302 s t e P 4 S T E P 8 Looking from the front of the vehicle back, mount each of Hold the Stealthbox with the woofers pointing down and the Bottom Angle Brackets as shown in s tep 7 using the the bottom of the enclosure (where the two threaded inserts are) towards you as Bill is demonstrating here. supplied 3/8-16 x 1-1/4” Hex Head Bolts as seen at left, on the bottom of the Stealthbox®. s t e P 5 S T E P 9 Now is an excellent time to run the wire for the Ste

Resumen del contenido incluido en la página 3

SB-GM-CAM/10W3v3 INSTR_SKU# 011302 I n C l u d e d H a R d W a R e S T E P 1 2 Using the supplied 3/8-16 x 1-1/4” Hex Head Bolt, install the 1) Top Center Bracket 2) Bottom Angle Bracket Top Center Bracket as shown. 3) 3/8-16 x 1-1/4” Hex Head Bolt s P e C I F I C a t I o n s Enclosure Type: Acoustic Suspension (sealed) Driver Type: 10W3v3-8 Nominal Impedance: 2.6 Ohms (woofers are wired in parallel) Continuous Power Handling: 1500 Watts P o W e R R e C o m m e n d a t I o n S T E P 1 3 J