Manual de instrucciones de JL Audio SB-K-SL-12W0v2

Resumen del contenido incluido en la página 1

SB-K-SL-12W0v2 INSTR_SKU# 011315
Installat Ion

d I F F I C u l t Y :

If you choose to perform the installation yourself, it is absolutely vital that
®
out
the Stealthbox be properly mounted to the vehicle according to these
o F
instructions. Failure to mount the enclosure properly presents two problems:
I n s t a l l a t I o n G u I d e
for the 1) The sub-bass performance will suffer due to the movement of the enclosure
25
caused by the force exerted by the woofer(s).
SB-K-SL-12W0

Resumen del contenido incluido en la página 2

SB-K-SL-12W0v2 INSTR_SKU# 011315 s t e P 4 S T E P 8 Gently set the Stealthbox® in place centering the Spare Tire From the rear of the vehicle looking into the spare tire well, Platform in the recess. Once the Stealthbox ® is in place, put position the three Wax Squares as shown, make sure that the Wax Squares adhere to the floor well so that they don’t shift enough pressure on it to cause the three Allen Head Set Screws to mark the Wax Squares. Remove the Stealthbox® while making impres

Resumen del contenido incluido en la página 3

SB-K-SL-12W0v2 INSTR_SKU# 011315 I n C l u d e d H a R d W a R e s t e P 1 2 1) 8mm x 38mm Coupling Nut 1) 8mm x 16mm Hex Cap Screw Replace the tool kit that was removed in step 2. 3) 3/8-16 x 2-1/4” Allen Head Set Screw 3) 3/8-16 Hex Nut 3) 3/8” x 1-1/4” Fender Washer 3) 3/8” Split Lock Washer 3) 3” x 3” Wax Square 4) 1/4-20 x 1-1/2” Allen Head Bolt 2) 1/4-20 x 2” Phillips Flathead Screw 1) 5/16” Split Lock Washer 1) Custom Mount Strap s P e C I F I C a t I o n s Enclosure Type: Acous