Resumen del contenido incluido en la página 1
HDMI 1.3 Receiver over Signal
CAT5/CAT6
Model #: HDM-C5-3-R
© 2010 Avenview Inc. All rights reserved.
The contents of this document are provided in connection with Avenview Inc. (“Avenview”) products. Avenview makes no representations or warranties with
respect to the accuracy or completeness of the contents of this publication and reserves the right to make changes to specifications and product descriptions at any
time without notice. No license, whet
Resumen del contenido incluido en la página 2
Table of Contents Section 1: Getting Started ...................................................................................................................... 3 1.1 Important Safeguards ............................................................................................................ 3 1.2 Safety Instructions ................................................................................................................. 3 1.3 Regulatory Notices Federal Communications Commi
Resumen del contenido incluido en la página 3
Section 1: Getting Started 1.1 Important Safeguards Please read all of these instructions carefully before you use the device. Save this manual for future reference. What the warranty does not cover Any product, on which the serial number has been defaced, modified or removed. Damage, deterioration or malfunction resulting from: Accident, misuse, neglect, fire, water, lightning, or other acts of nature, unauthorized product modification, or failure to follow instructions suppl
Resumen del contenido incluido en la página 4
1.3 Regulatory Notices Federal Communications Commission (FCC) This equipment has been tested and found to comply with Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. Any changes or modifications made to this equipment may void the user’s authority to operate this equipment. 1.4 Introduction The Avenview HDM-C5-3-R HDMI 1.3 Receiver over Single CAT5 Extender boosts up your video/audio t
Resumen del contenido incluido en la página 5
1.5 Package Contents Before you start the installation of the converter, please check the package contents. - HDM-C5-3-R x 1 - Power Adapter (+5VDC, 4A) x 1 - User’s Manual x 1 1.6 Before Installation Put the product in an even and stable location. If the product falls down or drops, it may cause an injury or malfunction. Don’t place the product in too high temperature (over 50°C), too low temperature (under 0°C) or high humidity. Use the DC power adapter with correct
Resumen del contenido incluido en la página 6
1.7 Panel Description FRONT PANEL (Transmitter, HDM-C5-3-S) Mode HDMI-IN 1. Rotary Switch 2. HDMI Input DIP SWITCH 0 HDMI Mode with Surround Sound Audio Output 1 HDMI mode with Stereo Audio Output 2 DVI Mode 3 Reserved 4 Reserved 5 Reserved 6 Use Default EDID 7 Learn EDID From the Display Note for EDID (Extended Display Identification Data) learning 1. Please connect the display which you want to read EDID with a HDMI cable to the transmitter’s HDMI-IN and turn Mode
Resumen del contenido incluido en la página 7
REAR PANEL (Transmitter, HDM-C5-3-S) +5V DC RJ4 5-OUT 1. 5V 4A DC Power Connector 2. RJ45 Out FRONT PANEL (Receiver, HDM-C5-3-R) EQ HDMI-OUT 1. Rotary Switch 2. HDMI Out EQ: Adjust the 8-level equalization control knob to the received HDMI signals. 0 – 7 = Strongest – Weakest. It is recommended to switch from 7 to 0 to find the optimal visual experience. REAR PANEL (Receiver, HDM-C5-3-R) +5V DC RJ45-IN 1. 5V 4A DC Power Connector 2. RJ45 In w
Resumen del contenido incluido en la página 8
1.8 Installation To setup Avenview HDM-C5-3-R with HDM-C5-3-S follow these steps for connecting to a device: 1. Connect your HDMI/DVI source (such as a Blu-ray Disc player) to Transmitter (HDM-C5-3-S). 2. Connect your HDMI/DVI display (such as a LCD TV) to the receiving unit HDM-C5-3-R. 3. Connect your CAT-5/5e/6 LAN cable between the transmitting and receiving units. 4. Make sure CAT-5/5e/6 LAN cable is tightly connected and not loose. 5. Plug in 5V DC power cord to the power jac
Resumen del contenido incluido en la página 9
1.10 General Troubleshooting Problem Possible Solution Check if connection to the source and the display are correct. No Image Ensure that display device supports 480p, 720p and 1080p resolution This product supports up to 1080p (1920x1200) resolution. Check the DVI and HDMI connection Screen Defects Appear If outputting from a PC. Check the maximum resolution range of the graphics card. Section 2: Specifications Item Description Units HDM-C5-3-S HDM-C5-3-R HDMI 1.3 T
Resumen del contenido incluido en la página 10
Disclaimer While every precaution has been taken in the preparation of this document, Avenview Inc. assumes no liability with respect to the operation or use of Avenview hardware, software or other products and documentation described herein, for any act or omission of Avenview concerning such products or this documentation, for any interruption of service, loss or interruption of business, loss of anticipatory profits, or for punitive, incidental or consequential damages in c
