Manual de instrucciones de JBL GTO16T

Resumen del contenido incluido en la página 1

tweeter
owner’s
manual
THANK YOU
for purchasing JBL GTO16t automotive tweeters.
We’ve organized this manual to make your installation as
simple and trouble-free as possible. Please read it thoroughly before
proceeding. Remember to keep your sales receipt and this manual
in a safe place so both are available for future reference.

Resumen del contenido incluido en la página 2

INSTALLATION WARNINGS AND TIPS SPEAKER PLACEMENT ABOUT THESE ABOUT THE FILTER INSTALLATION TIPS ABOUT PLACEMENT INSTRUCTIONS Passive filter design involves pre- • Always wear protective eyewear Figures 1 and 2 show possible speaker placements with Figure 1 being more Installation of automotive stereo cise circuit design and component when using any tools. desirable. We recommend using the kick panel for mounting to obtain the components can require extensive selection. Moreover, a well- • Turn o

Resumen del contenido incluido en la página 3

TWEETER INSTALLATION BLACK (–) (–) SMALL LUG BLACK RED (+) BLACK (–) Figure 3. Surface-mounting the tweeter and connecting the crossover. RED (+) RED 1 (+) LARGE LUG 2 Figure 5. Aiming the tweeter at a 4 3. Rotate entire assembly desired listening position. to aim angled tweeter toward listener. Figure 4. Mounting the tweeter using the I-Mount™ (patent no. 5,859,917) flush-mounting kit. 4. Securely tighten the large hand nut. Also see Figure 5. 3 1 1. Slide screw up or 2 down

Resumen del contenido incluido en la página 4

SPECIFICATIONS GTO16t Type: 25mm (1") tweeter Speaker Impedance: 4 ohms Power Handling: 50W RMS, 150W Peak (with enclosed filter) Sensitivity (2.83V, 1m): 90dB Frequency Response: 2.5kHz – 21kHz Mounting Depth: 31mm Cut-Out Diameter: 45mm GENERAL CARE The loudspeaker grilles may be cleaned with a damp cloth. Do not use any cleaners or solvents on the grilles or the speaker cones. A valid serial number is required for warranty coverage. Features, specifications and appearance are subject to chan