Manual de instrucciones de Tributaries HDMI HXC6IR

Resumen del contenido incluido en la página 1

over CAT6 with IR Control
HXC6IR
Extends HDMI 140 feet
www.tributariescable.com

Resumen del contenido incluido en la página 2

over CAT6 with IR Control HXC6IR Table of Contents 1. Introduction ...................................................................................... 1 2. Features ............................................................................................. 2 3. Package Contents .............................................................................. 2 4. Operation Controls and Functions ................................................... 3 4.1 Transmitter ........................

Resumen del contenido incluido en la página 3

To double your maximum distance, add the Tributaries HXC6R Repeater (optional). This passive device can be inserted at the end of the appropriate length of CAT6 cable run from the Tributaries HXC6IR transmitter unit. A similar length of CAT6 can be run to the Tributaries HXC6IR Receiver unit. The HXC6R supports all the features of the HXC6IR. It is possible to substitute CAT5E cable for the CAT6. However, the maximum resolution capability will be limited to 1080p/8 bit color, HDMI v1.2. All

Resumen del contenido incluido en la página 4

4. Operation Controls and Functions 4.1 Transmitter POWER 5V HDMI INPUT Transmitter VIDEO DOC CAT6 OUTPUT 1 2 3 4 5 IR Transmitter: Connect IR blaster cable included in box to this input. Place the 1 eye of the blaster in front of the source equipment. The IR blaster accepts a POWER 5V HDMI OUTPUT frequency range from 20 KHz to 60 KHz. VIDEO DOC HDMI Input: Connect the HDMI cable from your source's HDMI output 2 CAT6 INPUT 3 Power 5V: Connect the 5 volt power supply included in box 1 2 3

Resumen del contenido incluido en la página 5

POWER 5V HDMI INPUT Transmitter VIDEO DOC CAT6 OUTPUT 1 2 3 4 5 4.2 Receiver POWER 5V HDMI OUTPUT VIDEO DOC CAT6 INPUT 1 2 3 4 5 1 Power 5V: Connect the 5 volt power supply included in box HDMI Output: Connect an HDMI cable from your Display 2 IR Receiver: Connect the IR receiver cable (included) to this input. Place the 3 eye in front of the display, then use the existing remote to control the source equipment. The IR receiver accepts a frequency range from 20 KHz to 60 KHz. 4 VIDEO CAT6

Resumen del contenido incluido en la página 6

5. Pin Assignments 5.1 IR Pin Assignments 5.2 RJ45 Pin Assignments Pin VIDEO DDC 1 TMDS2+ SCL 2 TMDS2- N/A 3 TMDS1+ SDA 4 TMDS1- POWER 5V 5 TMDS0+ GROUND 6 TMDS0- IR 7 TMDSC+ HPD 8 TMDSC- CEC 5

Resumen del contenido incluido en la página 7

HDMI HDMI 6. Specifications Transmitter 1 X HDMI 1 X IR Blaster 1 X CAT6 Output VIDEO 1 X CAT6 Output DDC Receiver 1X HDMI 1 X IR Receiver 1 X CAT6 Input VIDEO 1 X CAT6 Input DDC HDMI Input/Output Cable 1080p 8-bit (15M), 12-bit (15M) CAT6 Cable 1080p 8-bit (45M), 12-bit (20M) Power Supply 5V/1A, universal CE/FCC/UL Certified Dimensions Transmitter: 3”(W) x 4.5”(D) x 1.2”(H) Receiver: 3”(W) x 2.8”(D) x 1.2”(H) Weight Transmitter: 7 oz. Receiver: 3 oz. Operating Temperature 32F - 104F St

Resumen del contenido incluido en la página 8

©2010 Gordon J. Gow Technologies, Inc. All rights reserved. TRIBUTARIES® is a registered trademark of Gordon J. Gow Technologies, Inc. All other trademarks are the property of their respective owners. As we continually strive to improve our products, TRIBUTARIES® reserves the right to change product specifications without notice. The technical and other information contained herein is not intended to set forth all technical and other specifications of TRIBUTARIES® products. Additional infor