Manual de instrucciones de Tributaries HDMI HX1C6-PRO

Resumen del contenido incluido en la página 1

HDMI Extender over HDBaseT
HX1C6-PRO
Extends HDMI 300 feet over one CAT6
www.tributariescable.com

Resumen del contenido incluido en la página 2

HDMI Extender over HDBaseT HX1C6-PRO Table of Contents 1 1. Introduction ...................................................................................... 2 2. Features ............................................................................................. 2 3. Package Contents .............................................................................. 3 4. Operation Controls and Functions ................................................... 3 Transmitter Front and Rear Panels

Resumen del contenido incluido en la página 3

2. Features • Extends 12 bit color, 1080p/60Hz HDMI signals up to 300 feet over a single CAT6 cable • Compliant with HDMI 1.3, HDCP 2.0 and DVI 1.1 standards • Supports PCM 2 Channel audio, 5.1, 7.1, DTS®-HD and Dolby®Audio formats • Supports 3D • Supports IR Pass Thru function for the control of remote HDMI source devices • Supports CEC bypass • Supports xvYCC Color Space 3. Package Contents • (1) HX1C6-PRO HDMI v1.3 Transmitter • (1) HX1C6-PRO HDMI v1.3 Receiver • (1) IR Emitter • (

Resumen del contenido incluido en la página 4

4. Operation Controls and Functions Transmitter (TX) Unit 1 2 4 3 5 6 1 HDMI Input: Connect to the HDMI output of your source equipment such as a DVD player or Set-top-box with an HDMI cable. 2 IR Emitter Input: Connect IR emitter cable (included) to this input. Place the eye of the emitter within the range of the source equipment. 3 Power LED: This Power LED indicator will illuminate when the transmitter is connected to its 5VDC power supply that is plugged into a wall outlet. 4 Link LED: T

Resumen del contenido incluido en la página 5

Receiver (RX) Unit 2 1 3 4 5 6 1 Link LED: This LED indicator will illuminate once the CAT6 cable has been properly connected between the Transmitter and Receiver units 2 Power LED: This Power LED indicator will illuminate when the receiver is connected to its 5VDC power supply that is plugged into a wall outlet. 3 RJ45 Output: Connect a CAT6 cable terminated with an RJ45 modular plug into this port 4 Power Input: Connect the 5VDC power supply to the receiver of the HX1C6- PRO. Then connector

Resumen del contenido incluido en la página 6

5. IR Termination 1 2 1 2 3 5. RJ45 Terminations 5

Resumen del contenido incluido en la página 7

HDMI HDMI 5. Connection and Installation HDMI Cable HDMI CAT 6 Cable DVD Player Transmitter Receiver HDMI LCD TV • Connect one HDMI cable between the source output port and the HDMI input port of the HX1C6-PRO transmitter • Connect one HDMI cable between the HDMI output port of the HX1C6-PRO and the input port of the display or sink device. • Connect one CAT6 cable terminated with RJ45 modular plugs between the output port of the transmitter and the input port of the Receiver of the H

Resumen del contenido incluido en la página 8

HDMI Electronics 2 Year Warranty This Warranty only applies to products purchased and used in the United States of America. Products purchased or used outside the United States are subject to such warranties, if any, as are provided by the Tributaries distributor in the respective countries. Scope and Duration of Warranty Subject to the terms and conditions stated below, Gordon J. Gow Technologies, Inc., (“Gow”) warrants that this Product shall be free from defects in workmanship or materials